Sign In Join 

You are here: [F] Forums / Maintenance & Repair / Paint and Body Maintenance & Repair



Paint and Body Maintenance & Repair

1025 messages,  Last post on Nov 12, 2009 at 10:06 AM

You are in the Maintenance & Repair Forum. Your Host is mr_shiftright

What is this discussion about? Auto Body, Paint, Coupe, Convertible, Hatchback, Truck, Sedan, Wagon, SUV, Van


Messages Page 99 of 103
1
...
96
97
98
99
100
101
102
103
Prev
Next
Last
Go To Msg #
Search This Discussion

#978 of 1025
Simple fix for a small dent scratch? by mvaussies
Jun 08, 2009 (5:10 am)
Reply
I'm looking for a fairly simple way to fix for (future rust reasons) a smallish dent/scratch not my door. I keep my vehicles for awhile. It is not too bad, & the thing is, it will end up under a vinyl stick on business sign. But I'm thinking I should seal it up well before burying it under the sign.
 
Should I what? Sand area down through rust, prime, rubbery rust paint? then simple spraycan paint, how to wait to put sign on? etc.?
#979 of 1025
Re: Simple fix for a small dent scratch? [mvaussies] by Mr_Shiftright HOST
Jun 08, 2009 (7:06 am)
Reply

Replying to: mvaussies (Jun 08, 2009 5:10 am)

I wouldn't try to paint it or sand it, no. Just touch up the bare metal spots with a touch-up stick and then when you have the time/money, get it professionally redone.
#980 of 1025
info by jwjackson
Jun 17, 2009 (11:40 pm)
Reply
I am currently deployed to Iraq with the texas army national guard. When i get home i wanted to get into auto body repair. I found a school that when i finish will give me $3500 worth of tools plus an AAS in auto body repair. The military will pay for it completely, but was told that most businesses dont want to hire someone who went to school for it. Apparently they would have to train me the way that they want. Does anyone know if this is true. Any advise on wether or not i should go to the school or try to become someones apprentice would also be very welcome. Thanks
#981 of 1025
Re: info [jwjackson] by Mr_Shiftright HOST
Jun 18, 2009 (9:53 am)
Reply

Replying to: jwjackson (Jun 17, 2009 11:40 pm)

They may wish to re-train you but if you are asking is it better to go into a shop with zero experience and ask for a job, or is it better to have a trade school certificate, I think the answer is obvious.
 
You might have a friend back home here ask around some hi-end body shops and see what they say. My impression is that there is a severe shortage for skilled people with an attitude to perform, and with your motivation both to perform successfully in the Guard overseas, and to get an AAS, a shop would be foolish to turn you down.
#982 of 1025
Re: info [jwjackson] by obyone
Jun 18, 2009 (11:12 am)
Reply

Replying to: jwjackson (Jun 17, 2009 11:40 pm)

I have two friends that own autobody shops. One thing I've noticed over the years is that they will give anyone with a good attitude a chance whether or not they have experience. The quickest way to get on their bad side is when receiving instructions on how to do something replying with "we learned to do it this way in school". While they don't mind if you suggest something, they absolutely hate it when being told by some rookie what they learned in school from an instructor that couldn't hack the business.
#983 of 1025
Re: info [obyone] by Mr_Shiftright HOST
Jun 18, 2009 (4:59 pm)
Reply

Replying to: obyone (Jun 18, 2009 11:12 am)

Well sure, you don't want to walk in with a chip on your shoulder; on the other hand, you don't want to start work as a floor sweeper either, the kid who "knows nothing".
 
If nothing else, the school will teach you the proper use of tools and some common sense. Even if you learned nothing more than how not to break tools and how not to destroy a car's body, that's a good start.
 
Besides, school's a good way to see if you even like this kind of work.
 
I'd also inquire as to the school's placement service and by all means talk to graduates. If the school won't help you place, and won't let you talk to graduates, that's not a good sign in my opinion.
#984 of 1025
Re: info [jwjackson] by bigfur
Jun 24, 2009 (6:27 am)
Reply

Replying to: jwjackson (Jun 17, 2009 11:40 pm)

If you go into a body shop with no experience and are not in a program to learn auto body repair they will laugh you right outta the shop. I was in a course sponsored by GM a few years ago that included having to be in an apprenticeship program, the shop will try to "train" you their way of doing things. You need a basic understanding of the things that all techs do that dont ever change and then each shop will show you their way of doing things. The old timers in the business are called journeymen for a reason, they have been to five to ten shops in the thirty years. They have the basics down and just have to learn the paperwork and other system things that each company does. With out a doubt go to school to learn the basics and go from there.
#985 of 1025
Re: info [bigfur] by Mr_Shiftright HOST
Jun 24, 2009 (7:04 am)
Reply

Replying to: bigfur (Jun 24, 2009 6:27 am)

Another wild idea that I have actually seen work---is to find a really great shop and PAY THEM to teach you---instead of giving it to a college. In other words, you pay the shop tuition.
#986 of 1025
Re: info [Mr_Shiftright] by obyone
Jun 24, 2009 (9:47 am)
Reply

Replying to: Mr_Shiftright (Jun 24, 2009 7:04 am)

Sometimes no money is enough to pay for the major screwups. However paying them should lessen the blow.
#987 of 1025
Re: info [obyone] by mitchflorida
Jun 24, 2009 (10:00 am)
Reply

Replying to: obyone (Jun 18, 2009 11:12 am)

They may prefer someone with little experience in the field because they can pay him much less. If they hire someone who has been certiified, they would have to pay you a higher salary.
 
I think the more experience you have, the better.

Messages Page 99 of 103
1
...
96
97
98
99
100
101
102
103
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

You are here: [F] Forums / Maintenance & Repair / Paint and Body Maintenance & Repair

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement