Ask the Car People.SM


Ford Expedition Maintenance and Repair

1936 messages,  Last post on May 21, 2013 at 11:24 AM

You are in the Ford Expedition Forum.

What is this discussion about? Ford Expedition, SUV

    
 
Go to NHTSA to file a safety complaint.
 
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153

Messages Page 182 of 195

#1805 of 1936 Re: 1998 Ford Expedition Air Suspension Failure Problems [septemberc] by pickles1

Mar 25, 2009 (12:37 pm)

Replying to: septemberc (Nov 03, 2008 5:24 pm)
I am so glad I ran into your post. I have a 2001 Eddie Bauer Expedition 2x2 with the air ride suspension. This morning when I got up, the back end was so low, it was almost hitting the tires. When I turned it on the back end slowly pumped up.
What do I do to fix it??? Did you ever get your problem fixed. Some one PLEASE ADVISE if we can do it ourselve. Husband laid off of work and no $$$ to fix an expensive problem.

#1806 of 1936 Re: 1998 Ford Expedition Air Suspension Failure Problems [pickles1] by alwaysfords2

Mar 25, 2009 (1:54 pm)

Replying to: pickles1 (Mar 25, 2009 12:37 pm)
Considering this person last logged in on the day they made that post and then never came back, a reply is unlikely. You could have a leaky airbag issue, a broken line that lets the system bleed off over night, or bad valves in the compressor that won't hold the pressure.

#1807 of 1936 Re: engine keeps dying [suemas] by ford103

Apr 30, 2009 (10:36 pm)

Replying to: suemas (Nov 04, 2002 6:24 pm)
not sure that this is the same what happen to me our battery would go dead all the time after a long time ..........Had to fix it it was seat covers on the drivers side
the cover was hitting the button that moves your seat ...........
   HOPE THIS WILL HELP

#1808 of 1936 CAR ALARM by ford103

Apr 30, 2009 (10:40 pm)

My alarm is not working and not sure where the fuse's are for the alarm???????????
1999 FORD EXPEDITION

#1809 of 1936 clicking noise by jamie27

May 04, 2009 (10:21 am)

there is a clicking noise coming from the rear of the vehicle inside, someone told me that it is probably the actuator and i was wondering if anyone else has this problem and if so if this is the case. 2004 eddie bauer

#1810 of 1936 Re: clicking noise [jamie27] by alwaysfords2

May 05, 2009 (5:16 am)

Replying to: jamie27 (May 04, 2009 10:21 am)
you aren't being very specific with your issue. when does it do it? If it is a blend door actuator it is related to the rear heating and cooling and will make the noise when you try to use the rear system. There are two actuators in the rear, so if it is the case you need to figure out if it is the one that changes air from roof to floor or the one that changes from hot to cold.

#1811 of 1936 2006 Eddie Bauer Power Driver Seat Automatic Reverse by dan_z

May 13, 2009 (3:07 pm)

I have a 2006 Expedition Eddie Bauer. THe power drivers seat is equipped with the auto reverse function. So when the key is turned to the off position, the seat automatically moves all the way back.
 
The function is working fine. But I feel it is unnecessary and I am sure that it will eventually cause the motor to prematurely wear out.
 
I would like to disable this feature and cannot find the answer anywhere. Does anyone have any ideas?
 
Thanks

#1812 of 1936 Re: 2006 Eddie Bauer Power Driver Seat Automatic Reverse [dan_z] by alwaysfords2

May 14, 2009 (5:37 am)

Replying to: dan_z (May 13, 2009 3:07 pm)
Not sure in your 06 specifically, but in both my 03 and 04 it can be turned off through a series of set up menus int he message cenrter. I'd imagine it is the same or similar in yours.

#1813 of 1936 Re: 2006 Eddie Bauer Power Driver Seat Automatic Reverse [alwaysfords2] by dan_z

May 14, 2009 (5:49 am)

Replying to: alwaysfords2 (May 14, 2009 5:37 am)
Thanks for the reply. Any idea where I can find those instructions? Do you have a list of instructions for your vehicles that I could try.
 
I have searched everywhere and can't seem to find any information.

#1814 of 1936 dan by alwaysfords2

May 14, 2009 (8:02 am)

They are in the manual. My message centers have three buttons, one of them is "set up" and by hitting it you page through the selectable features. They are highlighted for what they are set to, and one of the other buttons in the message center changes the settings.

Messages Page 182 of 195

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement