You are here: Forums SUVs Ford Expedition Ford Expedition Maintenance and Repair

Ford Expedition Maintenance and Repair

1827 messages,  Last post on Nov 27, 2009 at 1:19 PM

You are in the Ford Expedition Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Expedition, SUV

Messages Page 176 of 184 1 ... 173 174 175 176 177 178 179 ... 184 Prev Next Last

Go To Msg # Search This Discussion

#1743 of 1827 Re: Is there a quick way to check if cruise control recall [alwaysfords2] by kentavos22 Feb 22, 2008 (6:53 am)
Replying to: alwaysfords2 (Feb 18, 2008 10:05 am) Thanks for the help.
#1744 of 1827 map light burnt out by tysmith14 Feb 25, 2008 (12:40 pm)
I have an 03 expedition and the drivers side map light is burnt out in the plastic console by the top of the windshield. How do I get the bulb out? I do not see any screws, does the plastic lense cover just pop off or the plastic frame covering it pop off?   Thanks in advance Replies to this message: tysmith14 (Feb 28, 2008 12:43 pm)
#1745 of 1827 Re: map light burnt out [tysmith14] by tysmith14 Feb 28, 2008 (12:43 pm)
Replying to: tysmith14 (Feb 25, 2008 12:40 pm) Anyone?????????
#1746 of 1827 Problem with CD Changer - "No CD" display by gsusigma Mar 21, 2008 (12:02 pm)
I have a 98 Expedition with a cd changer problem. I have seen similar posts re this problem, but no responses. When i press the cd button the message "No CD" displays (although there a cd's in the magazine) and i have not been able to eject the magazine since the problem started. Any suggestions? Replies to this message: steve_ (Mar 21, 2008 12:09 pm)
#1747 of 1827 Re: Problem with CD Changer - "No CD" display [gsusigma] by steve_ HOST Mar 21, 2008 (12:09 pm)
Replying to: gsusigma (Mar 21, 2008 12:02 pm) The tips in the How to Remove a Stuck CD guide mostly work on single disc players, but may as well try them. Pulling the fuse to reset the changer is probably your best shot.
#1748 of 1827 stuck magazines by alwaysfords2 Mar 24, 2008 (6:03 am)
I've had luck getting stuck magazines out by using a piece of shim stock (or a hack saw blade) and going along side the magazine on the long sides to hit the release. Replies to this message: steve_ (Mar 24, 2008 6:44 am) alwaysfords2 (Mar 24, 2008 8:21 am) steve_ (Mar 24, 2008 9:14 am)
#1749 of 1827 Re: stuck magazines [alwaysfords2] by steve_ HOST Mar 24, 2008 (6:44 am)
Replying to: alwaysfords2 (Mar 24, 2008 6:03 am) Great tip, I'll add it to the guide. Do you need two shims (one for each side)? Or can you hit the release on CD magazine from either side (or just one side at a time, if you get my drift). Thanks! Replies to this message: alwaysfords2 (Mar 24, 2008 8:21 am) steve_ (Mar 24, 2008 9:14 am)
#1750 of 1827 Re: stuck magazines [steve_] by alwaysfords2 Mar 24, 2008 (8:21 am)
Replying to: steve_ (Mar 24, 2008 6:44 am) It has been a few years since I last did this for my brother in law. If I recall correctly it was just one side. You can rock the magazine a little bit in the slot to see the mechanism and it was easy to release - sort of like using the little pin hole on a CD drive, the magazine pops up as soon as it is freed. Replies to this message: steve_ (Mar 24, 2008 9:14 am)
#1751 of 1827 Re: stuck magazines [alwaysfords2] by steve_ HOST Mar 24, 2008 (9:14 am)
Replying to: alwaysfords2 (Mar 24, 2008 8:21 am) Thanks - that'll make a handy addition to the guide!
#1752 of 1827 I think I really did it now..... by shaizma Apr 01, 2008 (3:15 pm)
Okay, Friday afternoon my husband and I were looking under the hood of my '03 Expedition topping off the fluids, checking the oil, etc. He was complaining that it was dirty under there so I drove up the street to the car wash. I started the engine and drove straight there so it was still cool. I sprayed degreaser on everything under the hood but was careful to not get much degeaser or water on the battery side. It ran fine down to the grocery store. I was driving home and it was fine then all of the sudden it started shaking while I was at a red light. The shaking hasn't gone away. Then the next day, I tried to start it and it acted like it was having a hard time-almost like the battery was dead. Then the gauges went goofy then back to normal. It did this a few times but hasn't the past few times I've started it. My husband undid the connectors and sprayed them with the air compressor nozzle to help dry them out. Didn't help. Also, the exhaust smells like rotten eggs. Any ideas for us to try? Thanks a million!! Replies to this message: gheimur (Apr 07, 2008 12:39 pm)

Messages Page 176 of 184 1 ... 173 174 175 176 177 178 179 ... 184 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Ford Expedition Ford Expedition Maintenance and Repair