Sign In Join 



Nissan Altima Maintenance and Repair

2487 messages,  Last post on Nov 29, 2009 at 11:59 AM

You are in the Nissan Altima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Altima, Sedan


Messages Page 235 of 250
1
...
232
233
234
235
236
237
238
...
250
Prev
Next
Last
Go To Msg #
Search This Discussion

#2332 of 2487
Re: 99 altima running rough [bdp68] by Mr_Shiftright HOST
Oct 26, 2008 (3:20 pm)
Reply

Replying to: bdp68 (Oct 26, 2008 1:47 pm)

Blinking engine light is not a good thing. You should use the car very little if at all until you get this looked at. Sounds like maybe you have a cylinder misfire which is causing unburned fuel to enter the catalytic converter, stressing it out and sending an emergency signal to the ECM.
 
Another possibility is that someone put in a huge amount of oil, and this is also stressing the catalytic, -- but in this case you'd probably have lots of smoke out the tailpipe.
#2333 of 2487
Re: '02 Altima engine [nissan16] by muff1
Oct 26, 2008 (3:36 pm)
Reply

Replying to: nissan16 (Aug 25, 2008 7:31 pm)

my cat is going out too it barely passed smog wich one of your cat's went out? the front or rear?
#2334 of 2487
Re: 2002 Altima 2.5 S Transmission Problem and Nissan's Service [jrdcuc] by angela0630
Oct 27, 2008 (1:40 pm)
Reply

Replying to: jrdcuc (Sep 27, 2005 2:10 am)

I completely agree with you!! Nissan needs a reality check! I have a 2002 Nissan Altima. I purchased it in 2004, 3 months into the purchase I had to have the transmission rebuilt, I had to take it back 9 TIMES before it was fixed properly. Recently, my daughter was driving the car and the exact same thing happened to her. She went to accelerate, and nothing. Then when she put it into park and back into drive it would not go. We had the car towed to the Nissan Dealership and they told us we would need a new transmission to the tune of $3800. THEN, 7 days later, the car is still in the shop, they call and say a "cradle" on the transmission had broken while they were trying to repair it, due to rust, so it would be another $178.00 for the cradle...then the said it would be another $$$900 to have the cradle welded into place. The car is worth about $4000 I just put $5000 into it... Not counting the first rebuilt transmission at 2300.00... WAKE THE HELL UP NISSAN. Don't you see the unhappy customers you are running away because you won't step up!
#2335 of 2487
Re: 99 altima running rough [Mr_Shiftright] by bdp68
Oct 27, 2008 (8:49 pm)
Reply

Replying to: Mr_Shiftright (Oct 26, 2008 3:20 pm)

i checked the oil and it was over but not by much .. the guy who used it said it started acting up and the light came on and thats when he put oil in ( he said 1 quart) i drove it about 2 miles and it would go from light on and when i slowed down it would blink.. ty 4 the help i am gonna go to autozone in morning and have them check since they do it free
#2336 of 2487
1996 Nissan Altima Code P0507 by biggrobs15
Nov 06, 2008 (3:58 pm)
Reply
Hello my cars check engine light went on I got code P0507 (Idle control system malfunction) Any suggestions. I need to do Smog Test but with this code I dont think it will pass. I was thinking of getting a new Catalyc Converter but I dont know if this is the problem, I dont want to replace parts that I might not need.
 
Than You
#2337 of 2487
1996 Nissan Altima P0420 (Catalyst Efficiency Below Threshhold Bank 1) by biggrobs15
Nov 06, 2008 (4:01 pm)
Reply
Hello I have Code P0420 Does this mean I have to change the Catalyc Converter????
#2338 of 2487
Re: 1996 Nissan Altima P0420 (Catalyst Efficiency Below Threshhold Bank 1) by Mr_Shiftright HOST
Nov 06, 2008 (4:27 pm)
Reply

Replying to: biggrobs15 (Nov 06, 2008 4:01 pm)

No, it means you have to check the warm-up three way catalyst (California models) or Three way catalyst (Non-California models).
 
Here's your HOMEWORK
 
Checking Catalytic Converters
#2339 of 2487
nissan altima 07 by 3gennissanfan
Nov 07, 2008 (6:53 pm)
Reply
JUST BOUGHT AN 07 ALTIMA 4 CYL,907 TITLE,HIT ON LEFT FRONT SIDE, BATTERY ACID DRIP ON THE COMPUTER N IT WOLDN'T START SO I BOUGHT A NEW ONE,IT STILL WONT START,EVERYTHIN WORKS;THE LIGHTS,THE SIGNAL,BRAKE LIGHTS,DASHBOARD N INSIDE LIGHTS,RADIO,BUT AFTER U INSERT THE "SMART KEY FAB" EVERYTHING GOES OFF, DEALER WON'T TAKE THE CAR BECAUSE I DON'T HAVE PLATES ON IT,HELLO IS A 907, HAVE TO PASS INSPECTION FIRST,ANYBODY OUT THERE HAVE ANY SUGGESTIONS WHAT THE PROBLEM IS?? IS A PRESENT FOR MY WIFE N I WANT TO GET IT INSPECTED B4 XMAS, THANKS IN ADVANCE FOR ANY HELP
#2340 of 2487
2005 Altima, Interior dome light issues by 06zx14
Nov 09, 2008 (2:31 pm)
Reply
Has anyone out there had a dome light that works intermitintly? My light stays out most of the time and some times it will come on if I tap on it. I've changed the bulbs a few times and the problem persists.
#2341 of 2487
replacement parts by henryeb
Nov 11, 2008 (10:13 pm)
Reply
hi guys,
am trying to get replacements for my struts, shock absorbers, brake disc and pads.
i see a lot of variables......ceramics, slotted, kyb, etc
am a little confused.
which ones will give me the best perfomance
i have a 2005 3.5SE altima
thanks

Messages Page 235 of 250
1
...
232
233
234
235
236
237
238
...
250
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement