Sign In Join 



Nissan Altima Accessories and Modifications

126 messages,  Last post on Aug 09, 2009 at 6:09 PM

You are in the Nissan Altima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Altima, Sedan


Messages Page 13 of 13
1
...
7
8
9
10
11
12
13
Prev
Next
Last
Go To Msg #
Search This Discussion

#117 of 126
Suspesion by luckydrawz
Jul 01, 2008 (4:38 am)
Reply
I wish I could figure out a way to soften this suspension a little it seems a little stiff.
The first time I saw the standard wheel and hubcap I thought someone had invented something to reduce the amount of brake dust that collects on the wheels. Needless to say I'm also interested in some alloy wheels anyone know anything?
#118 of 126
3.5 Tires on 2.5 Coupe by milo57
Jul 09, 2008 (3:21 pm)
Reply
I am probably going to buy an '08 Altima 2.5 Coupe. The 4 cylinder is so powerful I see no reason to accept the higher price and gas consumption of the 3.5 However, I really like the 17 inch wheels which, supposedly, are only available on the 3.5. I may ask if I can have them installed on a 2.5 as part of negotiations.
 
However, would the larger wheel affect handling, braking, etc? I have read many manufacturers disclaimers about the alleged dangers of aftermarket wheels. Is the 2.5 somehow "engineered" for 16 inch wheels in ways which would make the larger wheels a bad idea?
#119 of 126
Re: 3.5 Tires on 2.5 Coupe [milo57] by busiris
Jul 09, 2008 (5:16 pm)
Reply

Replying to: milo57 (Jul 09, 2008 3:21 pm)

However, would the larger wheel affect handling, braking, etc? I have read many manufacturers disclaimers about the alleged dangers of aftermarket wheels. Is the 2.5 somehow "engineered" for 16 inch wheels in ways which would make the larger wheels a bad idea?
 
There are many reasons that manufacturers have disclaimers about aftermarket wheels. But, they have nothing to do with the specific diameter. Those disclaimers usually refer to wheel offset, reliability, etc. Of course, if you put, say, 20" wheels on the car with a tire roughly 1" thick, it would "wreck" the suspension eventually, simply from the rough ride. However, you are referring to factory wheels, not aftermarket, so that qualification is irrelevent here.
 
And, it is possible that the suspensions could be tuned differently, one for more of a sporty ride, the other for a more cushioned ride. Therefore, the sport suspension would generally have a lower sidewall ratio tire (50, 55 or 60 series) and a larger wheel, to lessen the sidewall "flex" when cornering.
 
In the end, the difference between a 16" to 17" wheel should not cause any reliability or safety issues, but it may indeed have an effect on the ride which you may or may not notice. Also, depending on the tire size, it could potentially have an effect on the speedo calibration....the dealer should be able to answer that question for you.
 
In the end, if you find some aftermarket wheels that you like and wish to buy, it shouldn't be an issue if they are quality wheels and not significantly different from the factory wheels....Good Luck!
#120 of 126
Trunk liner for 2008 Altima by kapnbill
Jul 27, 2008 (8:37 am)
Reply
I just purchased a 2008 2.5 SL. Does anyone know if any companies sell custom fit trunk liners for this car. I'm looking for a waterproof liner with raised edges similar to Husky liners for SUVs. I'm not looking for a mat.
 
Thanks!
#121 of 126
Re: Trunk liner for 2008 Altima [kapnbill] by kennynmd
Jul 27, 2008 (8:04 pm)
Reply

Replying to: kapnbill (Jul 27, 2008 8:37 am)

i got mine from weathertech.com. It took a couple weeks to get in though. I am not sure about other companies because I always have bought from weathertech and like their products.
#122 of 126
cruise control kit by nautika
Oct 10, 2008 (2:14 pm)
Reply
Ive got 2.5S. 2007. Is it possible to install a cruise control? Where would i get the parts.
cheers
#123 of 126
Need some help Fellas by SALUTE
Dec 05, 2008 (4:10 pm)
Reply
Ihello everyone...whats good .i've been a nissan man my whole life since ive been driving. recently had a chance to drive a friends gt-r ...pure heaven anyways...i just got rid of my 05 altima SE_R for the 08 altima 3.5 SE...i beat the SE_R down and plus i really liked the cvt tranny when i test drove...on my SE_R..i had the AEM CAI and the exhaust done from the cat back with GREDDY....im lookin to do the same to my 08...need some suggestions for the best power sound ...and performance...Help?
#124 of 126
Valve tapping by luckydrawz
May 20, 2009 (5:39 am)
Reply
I'm in an 08 Altima 2.5S. I love the car but I've noticed what sounds like a valve rattle or tap especially when it's cold out or it's been sitting for a few days. Is this a valve clearance adjustment? Is it covered under warranty? Anyone have a clue?
#125 of 126
Nissan Altima/Maxima Wind Deflector by smarty666
Aug 05, 2009 (4:28 pm)
Reply
I was curious to find out from anyone who has one if the optional wind deflector you can get put on the altima and maxima moonroof really is worth the money and does it really reduce wind noise???? I really like the look of them and think they are sporty looking but I don't want to get one put on if it doesn't help wind noise and in fact makes it worse; any information would be greatly helpful!!!
#126 of 126
Re: Nissan Altima/Maxima Wind Deflector [smarty666] by freezed
Aug 09, 2009 (6:09 pm)
Reply

Replying to: smarty666 (Aug 05, 2009 4:28 pm)

I have one on my 2009 Altima. Came with the car, didn't order it. I really don't think it is worth it, it is still fairly noisy at 70 MPH with the moonroof open. Plus it is a pain in the rear end to wash around it. I'm thinking about removing it entirely.

Messages Page 13 of 13
1
...
7
8
9
10
11
12
13
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement