You are here: Forums Pickups Dodge Ram Dodge Ram: Problems & Solutions 

Dodge Ram: Problems & Solutions - READ ONLY

3275 messages,  Last post on Oct 18, 2006 at 8:20 PM

You are in the Dodge Ram Forum. Your Host is kcram

What is this discussion about? Dodge Ram Pickup 1500, Dodge Ram Pickup 2500, Dodge Ram Pickup 3500, Truck

Messages Page 226 of 329 1 ... 223 224 225 226 227 228 229 ... 329 Prev Next Last

Go To Msg # Search This Discussion

#2242 of 3275 Re: 2005 Dodge Ram 3500 rear fender removal [mmihailov] by kcram HOST Sep 24, 2005 (12:08 pm)
Replying to: mmihailov (Sep 23, 2005 9:58 am) The dually fenders are attached with perimeter adhesive as well as the hard mounts... plus you have the clearance light wiring to deal with. Doable, but definitely not simple.   kcram - Pickups Host Replies to this message: mmihailov (Sep 26, 2005 8:47 am) kcram (Sep 26, 2005 6:41 pm)
#2243 of 3275 98 Ram 1500: gravel sound coming from rear axle/drivetrain by mulz Sep 26, 2005 (3:34 am)
I noticed this weekend while driving down my driveway (low speed) what sounded like something metallic dragging on the ground. Upon inspection nothing was dragging, but the sound appears to be coming from the rear axle, drive train area. The best description I can come up with is like a rock-tumbler type sound.   At higher speeds and acceleration everything seems fine. It is just low speeds that it is noticeable.   Does anyone have any thoughts as to what might be up?   Thanks in advanced!
#2244 of 3275 Re: 2005 Dodge Ram 3500 rear fender removal [kcram] by mmihailov Sep 26, 2005 (8:47 am)
Replying to: kcram (Sep 24, 2005 12:08 pm) If I tried to remove them, would the perimeter adhesive stick to the paint and thus some of the paint get peeled off or spoiled somehow, or this adhesive is more like a silicon paste that stays flexible and could be safely removed off the paint? Thank you. Replies to this message: kcram (Sep 26, 2005 6:41 pm)
#2245 of 3275 Re: engine revving while driving and idling [asmira25] by 101vet Sep 26, 2005 (5:29 pm)
Replying to: asmira25 (Jul 09, 2005 5:34 pm) Did you ever find anything out on this. Same thing happened to my 99 ram 4x4 last week going through WVA last weekend. If you do please let me know.  Thanks. Replies to this message: bdavis1 (Oct 02, 2005 1:45 pm)
#2246 of 3275 Re: 2005 Dodge Ram 3500 rear fender removal [mmihailov] by kcram HOST Sep 26, 2005 (6:41 pm)
Replying to: mmihailov (Sep 26, 2005 8:47 am) Most Dodge parts that are held this way (such as moldings and badges) use two-sided heavy duty tape. It's really not there to "support" the fender, as the metal mounts take the weight.   kcram - Pickups Host
#2247 of 3275 ABS lite on by bjt Sep 28, 2005 (7:30 am)
My ABS lite came on and I read the repair manual which said to ground the abs connector to view the flash codes. The flash codes does not work when I do this. (2000 Ram 1500, 2 wheel drive, RWAL) Do I have the wrong connector or is this the wrong test procedure. Note: the connector is located below the cap module (two wires going to the module)   BJT
#2248 of 3275 Re: engine light on [luckyman1] by bjt Sep 28, 2005 (7:47 am)
Replying to: luckyman1 (Sep 21, 2005 10:19 am) Check for engine miss. The O2 sensor will go high and stay there until repaired.   BJT
#2249 of 3275 Ram 2500 won't start by headstanz Sep 28, 2005 (1:01 pm)
I'm hoping someone can help with this one. I have a 98 ram 2500 with approx. 93k miles. Every once in a great while it would start bucking, like it wasn't getting gas, I would pump the accelerator for a time and then it would start running fine. Recently it did the same thing, but then stopped all together. Assuming it was out of gas I put some in and it started and ran for about a day then again stopped. I have no check engine lights or any other warning indicators on. After talking to some people we came to the conclusion that it needed a new fuel pump which I changed. Unfortunately it still won't start. If I put the accelerator all the way to the floor it acts like it wants to go, but as soon as I let off of the pedal the engine just turns with no hint of wanting to run.   Any help is appreciated.   thanks Stan Replies to this message: napoleon (Sep 30, 2005 7:50 am) headstanz (Sep 30, 2005 11:40 am) headstanz (Oct 01, 2005 1:14 am)
#2251 of 3275 engine surging....any ideas by bdavis1 Sep 29, 2005 (6:24 pm)
well i have a 99 dodge 2500 24v cummins...while driving the engine revs.. i have had the TPS checked and removed and for another one...still does it.. i have had the Computer updated...stoped then started again several months later...i had transducer solined replaces and another part as well.. Any ideas...electrical or the tranny? any ideas please help!   thanks bri

Messages Page 226 of 329 1 ... 223 224 225 226 227 228 229 ... 329 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Dodge Ram Dodge Ram: Problems & Solutions