You are here:
Forums
SUVs
Ford Excursion
Ford Excursion Maintenance and Repair

423 messages, Last post on Nov 23, 2009 at 6:41 AM
You are in the Ford Excursion Forum. Your Hosts are steve_ & tidester
I had a 2001 excursion which bounced like a horse. Someone told me exactly what to do buying the parts right from Ford. Which I did and it worked great. I have a 2005 now with the 6.0 diesel. Any suggestions on the suspension and super chip [ if available ]. Thanks, John
|
|
|
I have an 01 XLT X and apparently am learning the hard way regarding the warping rotors. Just had the factory rotors turned and ceramic pads installed. Seams to be breaking much better, but how can you tell if the rotors are warping? Vibration? Another question, when going over speed bumps or deep depressions, feels like the front end is bottoming out in the shocks. There doesn't appear to be any fluid leaking from the shocks...any suggestions? |
|
| I have previously leased a '00 Excursion 4x4 6.8L Limited, and am now the proud owner of a '01 same make/model. I surpassed 50k in both vehicles and have noticed a few common problems such as slow window motors and definitely the object sensors in the rear of the vehicle. Both of these, and I know from experience, are covered under any extended warranty you might have purchased with your vehicle. Just recently however, I noticed with my '01 that while making right/left turns and applying the gas the steering seems to "stick" in place and I need to apply extra force to get it to straighten out. Usually the proper technique is to give it gas while coming out of a turn and it will straighten out almost naturally, but with my situation it will "stick" a few times a day. Straight ahead and lane changing are no problem, Ive just only begun to notice this change with right/left turns. Any help or suggestions would be greatly appreciated. Thanks guys. | |
|
I have a 2003 Ford Eddie Bauer Excursion 4X4 6.0 diesel. Ever since we took delivery of this vehicle it has been a financial nightmare. Since delivery in January 2003 we have had brake problems, injector replaces and computer problems. That was in the first six months. Our dealer told us to have patience because it was one of the first off the assembly line and bugs might need to be worked out. Well the bugs continued. We traveled and tow extensively between Minnesota and New Mexico. And over the course of ownership of this vehicle we made sure it was serviced by a Ford authorized service shop only. Every trip we made it ended up in the shop with some kind of malfunction. However, they always told us it was not related to the last problem. Ha! The final straw came in October of 2004 because the motor keep over heating and then the motor blew. The dealer insisted that the dealer in Minnesota didn't put the oil filter on right. And they even insinuated that we had something do to with it. However, we never worked on it and they knew it. They replace it under warranty at 81,000 miles. Dealer gave us a 36,000 mile warranty on the new motor. Because we couldn't afford to get out of this one and pay the difference for a new one we took back the car with the new motor hoping all would be well. NOT!! We had it serviced and as long as we do town driving it seemed fine. In May we took another long trip and once again it over heated. Took it in and they replaced the clutch fan and said all was well. Now for the final straw. Traveling back to NM the first of this month it over heated again. The gauges read hot and the cooling fan would not kick in. Vehicle broke down 300 miles from home. Had to get towed and was just told the computer malfunctioned and fried the 2nd motor. Because it is out of warranty by 1500 miles and it was not the motor it was the computer it is not covered under warranty. So we are told we will have to pay for the repairs and replacement of a new motor. About $15,000 plus. We still owe on this car. I have had it with Ford and people need to be aware to keep good records and not except excuses from their Ford Dealers, Customer Service and Service department. Just needed to vent. And if anyone else has had problems with the 6.0 diesel or computer. Thank you |
|
|
Has anyone had problems with the back window falling out on the 2004 Excursion? I have had the drivers side back window fall out 3 time in 7 months. The dealer has replaced the window each time but it is a pain and I'd like to know if it is a bigger problem than just mine.
|
|
|
I have a 2000 Excursion v10 and occasionally when I crank it, it either idles very low (4-500 rpm) or will completely shut off. It does not happen all the time, but enough to be really aggravating. (Maybe 1 out of 5 cold cranks.) At first I thought it had something to do with disconnecting the battery and not going through the engine idle re-learn process that is in the manual, so we disconnected the battery again and went through that multi-step process to let the engine "re-learn" it's correct idle. That seemed to work for a good while, but now it's happening again and repeating that process doesn't seem to fix it. Has anyone else had this problem? Any suggestions?
|
|
|
I have 2 one Eddie Bauer v10 and the other is Limited 4wd 6.0. Each has had its own set of problems and one common one. But when you have 4 kids 3 of which are in car seats, I think they're the best things on the road. So far, my local Ford dealers have been pretty good at taking care of the warranty issues, but they are near the end of the period. I may pay for the extended plan for the diesel. The V10 has had a bad alternator cash replacement and labor would have been about 750. I paid 0. The 6.0 has had 2 turbos, an egr valve, fan clutch (did u know that you truck transmission won't engage when the switch goes out, in the middle of the desert pulling a boat at 110 in the afternoon an hour ffrom the arizona border). I guess costs whould have been about 6000 so far only 75 buck for a fuel filter. They both have common problems with brakes. I can feel the vibration of warped rotors on both and I think I'll due the complete Power Slot rotor replacement on both along with the ceramic pads. Everything I've read says that is the way to go.I've learned alot about them and if you have questions I may have an answer. But I'm not a tech by any stretch of your or my imgination. Have fun and I really like this site. Good people!
|
|
|
Replying to: pjmarg (Jul 24, 2005 2:48 pm) |
|
|
Replying to: blackx (Apr 26, 2005 1:44 pm) it use to work fine, then it would make a short chirp and tun off, now it just turns off when i but it in "R" any help Darkbluestang |
|
You are here:
Forums
SUVs
Ford Excursion
Ford Excursion Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Ford Excursion



Browse by Board
Browse by Topic
Today's Chats