Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Vans & Minivans Dodge Sprinter Dodge Sprinter
1262 messages, Last post on Nov 24, 2009 at 4:19 PM
You are in the Dodge Sprinter Forum. Your Host is Karens
|
Replying to: kenbaker (Jul 06, 2006 5:31 am) visibility is much more enhanced - I have had them on 3 german cars now, purchased here in the US and bought the headlamp units in europe both the intensity, focusing and the color (white) of the light all make visibility day/night difference between them and the headlights commonly available now on US spec vehicles
|
|
|
my decision to purchase a sprinter drove one,, liked it, and assumed i could expect the quality i'd experienced in my MB cars, both build quality and support quality (i expected a downgrade in support quality but not the extent i've read about here) think i'll wait a year or two to see if the reports re the new 2007 version indicate any change i'll build a temporary camper for my toyota tundra double cab - if the japs can do it, why is it so difficult for, of all makers, MB or DC it's a shame, as the sprinter really does offer possibilities other vans don't and i had looked forward to it - in case some think my expectations are too high, i was a dealership mechanic in the late 60s into the mid 70s (BMW/NISSAN/SAAB), and still have a lot of friends in the dealerships around town, from mechanics to svc managers and the problems i've read about and the complete apparent failure on dealership tech support leaves me wondering where DC turned left when the rest of the market turned right sorry for the negative post, but hopefully someone from DC or MB monitors these posts wishing you guys many trouble free enjoyable miles |
|
|
Replying to: larryccf (Jan 24, 2007 8:45 pm) Its NOT that the headlight **quality** is not good enough for American roads... it is that the DESIGN is wrong unless changed for our roads. The quality of the entire van design is OK for US standards (as most trucks usually are). I am certain that the European standards for headlight illumination include very little side light and upper right quadrant lighting (as looking forward into the field of vision from the driver's seat). In Europe, it is mostly required for street signs and warnings to be lighted on their own and for the beam width/height of the headlamps to be restricted to avoid on-coming driver blinding effects. In the USA, we mostly don't light our street signs except in very progressive states/areas with LOTS of money. As a result, in order to see street signs and warning markers/signs, the NTSD and/or DOT require more broad beamed lighting on cars/trucks for the American market. Putting the Xenon (pseudo HID) bulbs in normal USA headlight enclosures is a hazard to on-coming traffic on two-way roads. And putting European headlight assemblies in a car meant for the Ammerican road system is bad because you can see where you're going, but you can't read the signs so well. KenB 
|
|
|
Replying to: kenbaker (Jan 26, 2007 12:22 pm) just for that purpose, to illuminate road signs better |
|
|
|
|
I'm a Fed Ex Home Delivery Contractor with the first Sprinter (158 Tall 2500) in our terminal (10/04). I fought a fierce fight to get it over the "bread truck" delivery vehicle. I'm very, very dissatisfied with the vehicle. I was never a fan of German vehicles (compared to my experience with Japanese engineering and reliability); owning and operating this van over the past 2 1/2 years has thoroughly convinced that this vehicle is nothing short of a nightmare! Overly complicaterd yet under engineered. Is this the price we Americans pay for WWII?? Still, I would like to join the discussion and add my two cents, learning from you while sharing from my experiences, in hopes of helping the uninitiated avoid the same pitfalls. Currently, my vehicle is in the shop since Tuesday, needing new glow plugs requiring removal of the head. At 144K!! It wouldnt start Tuesday for work; -8 that day. How can MB stay in business marketing a vehicle that has this many problems? It is so under-engineered... excessive tire wear, brakes, tie rods, ck engine light issues, EGR valves, preheater, serpentine belt tensioner, fuel lines bursting, batteries, turn signal assembly, wheel bearings, HVAC controller, front doors hyperextending and bending, rear doors wont stay shut, numerous parts not mentioned previously failing, bulbs burning out constantly, lack of adequate dealer servicing, parts on national backorder, severe traction issues on any loose/ slippery surface... the list goes on and on. Anyway, just wanted to throw my hat in the ring.
|
|
|
|
|
Replying to: paulkfedex (Feb 09, 2007 8:11 pm)   
|
|
|
Calling sprinterdoc Have you seen any problems with the rear lights going on and off. I go out to warm the van, dark out, and no tail lights. Other times just one on. But if you tap the lens it turns on. Makes you wonder when I hit small bumps if they are sending out morse codes. Thanks, Tom 
|
|
You are here:
Forums
Vans & Minivans Dodge Sprinter Dodge Sprinter
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Dodge Sprinter Cargo
2009 Dodge Sprinter
Browse by Board
Browse by Topic
Today's Chats
