You are here: Forums Maintenance & Repair Maintenance & Repair - Archived Discussions radiator flush 

radiator flush - READ ONLY

45 messages,  Last post on Nov 21, 2001 at 6:17 AM

You are in the Maintenance & Repair - Archived Discussions Forum. Your Host is mr_shiftright

This discussion is ARCHIVED. To reactivate the discussion, post a request in the Lost? Ask the M&R Host for directions! discussion.

Messages Page 6 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

#42 of 45 Never mix red/orange and green without a flush by q45man Nov 12, 2001 (5:39 am)
When incompatable coolants are mixed [not flushing out the system completely], they can react forming a gel IF left in years without changing. The problem is seen most often when the radiator is only drained [< 40% of total coolant].
#43 of 45 I've been told by gsleve Nov 18, 2001 (2:01 pm)
that a backflush kit usually involves a tee valve in one of the heater core hoses, then screw in a garden hose on the tee valve turn on water open radiator cap and petcock run engine 20min or 30min usually will flush the system including the heater core
#44 of 45 Coolant quantity by joe3891 Nov 19, 2001 (9:15 am)
When you read cooling system capacity does it also include the amount in the overflow tank to the cold level.
#45 of 45 Flush kits by adc100 Nov 21, 2001 (6:17 am)
They are another weak link in your coolant system integrity. Both times I have installed them I developed a hose failure there. If you are going to use one, buy a new OEM heater hose and install it before you put on the new hose (double clamp it)

Messages Page 6 of 6 1 2 3 4 5 6 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Maintenance & Repair Maintenance & Repair - Archived Discussions radiator flush