You are here: Forums Pickups Nissan Titan Nissan Pickups Maintenance and Repair

Nissan Pickups Maintenance and Repair

460 messages,  Last post on Oct 15, 2009 at 5:22 PM

You are in the Nissan Titan Forum. Your Host is kcram

What is this discussion about? Nissan Frontier, Nissan Titan, Truck

Messages Page 33 of 47 1 ... 30 31 32 33 34 35 36 ... 47 Prev Next Last

Go To Msg # Search This Discussion

#317 of 460 Re: Nissan pickup forum [p100] by pmcnary Oct 06, 2006 (2:35 pm)
Replying to: p100 (Jun 17, 2004 5:21 am) I have an 06 Nismo with 16" wheels. I need a set of steel wheels for my snow tires but Nissan wants $275 each... there appear to be no aftermarket wheels that will fit past the massive front brake caliper. Anyone have a source for these rims?
#318 of 460 New XE 4x2 desperate for wheel upgrade by bents Oct 07, 2006 (8:43 am)
I bought my truck yesterday, and the homely wheels gave me nightmares last night. I am a novice , though, and know nothing about possible upgrades, including possible size changes. The stock wheels are 15" steel. Tire size is 235-75-R15. I would like to retain my tires but to give my truck some dignity with good-looking wheels. I just don't know what options there are. Many thanks. Replies to this message: jayhawker4 (Oct 28, 2006 8:05 pm)
#319 of 460 Daytime Running Lights by lax5 Oct 08, 2006 (7:29 am)
I am considering importing a 2006 Frontier to Canada. One of the safety features required is daytime running lights, but they are not available on US sold vehicles. I am looking for suggestions on how to solve this problem.   TIA
#320 of 460 Re: 2000 Nissan Frontier, 5 speed manual cont. [brian_jp] by ryancey Oct 28, 2006 (2:06 pm)
Replying to: brian_jp (Sep 26, 2006 11:38 am) It is the throw out bearing on your clutch. My father has a 98 Forntier and it does it too. Keep driving it with the knowledge that you will need to replace the through out bearing in the future Ryan
#321 of 460 Re: NissanFrontierXE suddenly squealing when braking, after grinding gears.? [nissandog] by ryancey Oct 28, 2006 (2:11 pm)
Replying to: nissandog (Aug 18, 2006 8:45 pm) I think it was just bad timing. It sounds to me like your break pads just need replaced. They have squeekers to tell you when to replace them. Thats what it sounds like to you. Your gears should be fine. I doubt they are related at all. As for the shimmer your rotors could be a little warped. Take it into midas or something like that and have the breaks checked and replaced, and get the rotors turned. Ryan
#322 of 460 Re: New XE 4x2 desperate for wheel upgrade [bents] by jayhawker4 Oct 28, 2006 (8:05 pm)
Replying to: bents (Oct 07, 2006 8:43 am) I have a 2005 nissan frontier xe,been looking for wheels over a year. I heard you have to put 17" wheels on at least or adapters would work. I was very disappointed about the wheels you can find for these trucks. It is very hard.
#323 of 460 cold engine/oil pressure by larry10 Oct 29, 2006 (9:41 am)
When I start my '06 NISMO (cold engine) it takes a second (or less) for the oil to reach all the internal parts...I hear tapping! I have owned an '05 taco and an '05 Tundra but never had this problem.Am I being paranoid? Do any other NISMO's do this? Your' input please.
#324 of 460 cold engine/oil pressure by larry10 Oct 29, 2006 (9:43 am)
When I start my '06 NISMO (cold engine) it takes a second (or less) for the oil to reach all the internal parts...I hear tapping! I have owned an '05 taco and an '05 Tundra but never had this problem.Am I being paranoid? Do any other NISMO's do this? Your' input please. Replies to this message: ryancey (Oct 30, 2006 5:50 pm) larry10 (Oct 30, 2006 10:49 pm)
#325 of 460 ABS light on after brake light replacement? by bkaiser1 Oct 30, 2006 (10:21 am)
Hello! I have an 01 Frontier XE and I just had to replace a burned out brake light bulb. I took the bulb out of the socket before I drove to the store to buy a replacement and as soon as I started driving, the ABS light came on.   I replaced the bulb with a new one of the exact same part number, but the ABS light hasn't shut off...I'm sure it related because the ABS light has never come on before, and it would have to be a huge coincidence for there to be an ABS failure at exactly the same time I took the bulb out, but I have no idea how to make the light go off and the ABS function normally.   Any ideas?   Brian Replies to this message: moneyman6 (Oct 30, 2006 5:25 pm) ryancey (Oct 30, 2006 5:52 pm)
#326 of 460 Re: ABS light on after brake light replacement? [bkaiser1] by moneyman6 Oct 30, 2006 (5:25 pm)
Replying to: bkaiser1 (Oct 30, 2006 10:21 am) Could just have caused a short when you removed the bulb. It isn't very likely that the two are related or connected, but as you pointed out: there isn't much of another explanation.   If you had the capability I would run some DTCs, but you would need to have access to a shop of the thousands of dollars that the tool would cost.   Not much I can tell you except check your rear wheels ABS wiring around the ECM or around the rear of the truck. There may be some form of monitering system that, when removing the light, caused some rare damage.   You can try turning your car to on, then to off, then back to on. If the light begins to flash, then there is a chance that there is something wrong with the system.

Messages Page 33 of 47 1 ... 30 31 32 33 34 35 36 ... 47 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Nissan Titan Nissan Pickups Maintenance and Repair