You are here: Forums Sedans Oldsmobile Aurora Oldsmobile Aurora Maintenance & Repair

Oldsmobile Aurora Maintenance & Repair

4284 messages,  Last post on Dec 05, 2009 at 6:21 AM

You are in the Oldsmobile Aurora Forum. Your Hosts are pat & karens

What is this discussion about? Oldsmobile Aurora, Auto Repair, Sedan

Messages Page 420 of 429 1 ... 417 418 419 420 421 422 423 ... 429 Prev Next Last

Go To Msg # Search This Discussion

#4189 of 4284 Re: 98 Aurora - service engine light [jimd604] by jimd604 May 18, 2009 (9:29 am)
Replying to: jimd604 (May 14, 2009 8:15 am) Well, I took it to another shop and the code is po 143 (shorted wire or ecm) They said I need a new computer and the dealer will have to flash it. Make sense? I don't know what to do. In the meantime, the car drives great. Replies to this message: e_net_rider (May 19, 2009 4:01 am)
#4190 of 4284 Re: 98 Aurora - service engine light [jimd604] by e_net_rider May 19, 2009 (4:01 am)
Replying to: jimd604 (May 18, 2009 9:29 am) Codes can vary between make and model to some degree although they were supposed to become standardized with OBDII. http://www.blazerforum.com/forum/showthread.php?p=210550 Take a look at that link which gives a different meaning related to the sensor. Was that the only code? Autozone will check them for free. I need to renew my AllData or I would check it for you. It could possibly make sense, the new computer. Is that the sensor they already replaced:? Was it a GM? I checked many at local parts stores and they did not have a many fluted on the sensor possibly slowing sensing. There are multiple O2 heater fuses as I recall. (you would likely get another code if the heater was not working. There are maybe 6 or 8 codes for each sensor) Was the wiring verified? Dirt or debris cleaned from connector before the new one was plugged? Usually there will be some indication such as hesitation, stumble, etc. with a bad circuit. Maybe the computer is smart enough to use data from the other bank collectively with the last two sensors. If you are at all mechanically inclined I would recommend getting All Data subscription.
#4191 of 4284 NEED SOME HELP by spiders1 May 31, 2009 (6:30 pm)
I have a 97. The interior lights went out. Door locks do not work and chimes do not work now. All the fuses are good , is there a breaker for these?Or do I have a different problem.Can a dealer find a bad wire? Really need some help.
#4192 of 4284 a t fluid change schedule aurora 97 by brinwood Jun 01, 2009 (4:57 pm)
Have 130K on my 97. Still original AT fluid. Count-down display still shows 100%. I hate to fix something if it ain't broke....... Has anyone run into this before me? Replies to this message: pscheid (Jun 01, 2009 6:59 pm)
#4193 of 4284 AT Fluid - showing 100% after 130K miles by txshadow12 Jun 01, 2009 (6:05 pm)
Have a '98 with same situation. That function has not worked (rest of auto is 100% functional) since day one. After conferring with multiple mechanics, all agreed with ignoring the readout and change fluid according to mfg's recommendations. Just don't do a flush; change AT fluid and filter only after you're at > 75,000 miles.
#4194 of 4284 Re: a t fluid change schedule aurora 97 [brinwood] by pscheid Jun 01, 2009 (6:59 pm)
Replying to: brinwood (Jun 01, 2009 4:57 pm) My 1998 is the same......100% on the transmission fluid life since new. I am fairly certain the owners' manual scheduled maintenance lists 150,000 miles as the first change under "normal" driving conditions.
#4195 of 4284 Memorized Seat Adjustment by taylorbug1 Jun 05, 2009 (2:48 am)
Anyone know how to reset the driver's side memorized seat adjustment for a "97 Aurora??? Thanks. Replies to this message: pscheid (Jun 05, 2009 1:18 pm)
#4196 of 4284 seat preset by brinwood Jun 05, 2009 (3:46 am)
the way I do it. while parked in park, put seat where you want it and press the button, either 1 or 2, then press set. now the seat will go to that position when you have changed it and want to go back to the preset. you can't do this when the car is being driven.
#4197 of 4284 Re: Memorized Seat Adjustment [taylorbug1] by pscheid Jun 05, 2009 (1:18 pm)
Replying to: taylorbug1 (Jun 05, 2009 2:48 am) Just to add to what brinwood said, don't forget that the car came with two sets of keys/remote key fobs. One set of keys/fob controls memory button 1 and one set memory button 2.   And don't forget to also set the driver's and passenger's mirrors before you hit the set button. They are controlled by the same memory.
#4198 of 4284 PLEASE HELP by btezzy Jun 13, 2009 (6:24 am)
i have a 97 aurora an it do not start no lights come on when i try to start i was told it was my battery but when it was starting it act like it didnt want to so my question it do anyone have the same proplem as me if so HELP!!!

Messages Page 420 of 429 1 ... 417 418 419 420 421 422 423 ... 429 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Oldsmobile Aurora Oldsmobile Aurora Maintenance & Repair