Sign In Join 



Oldsmobile Aurora Maintenance & Repair

4283 messages,  Last post on Nov 25, 2009 at 10:33 AM

You are in the Oldsmobile Aurora Forum. Your Hosts are pat & karens

What is this discussion about? Oldsmobile Aurora, Auto Repair, Sedan


Messages Page 403 of 429
1
...
400
401
402
403
404
405
406
...
429
Prev
Next
Last
Go To Msg #
Search This Discussion

#4019 of 4283
Loose Sterring Wheel?? by boston08
Aug 30, 2008 (4:52 am)
Reply
Hello I have a 1995 Oldsmobile Aruora That i just bought in April, Now the sterring wheel is loose it moves up and down and you can feel some play in it while driving! So i was wondering if anyone has ever heard of such a thing like this? At first it didn't pass state inspection because of the play the wheel had in it,,So the place i bought it from somehow got a sticker on it..Than he told me it was suspoes to be that way incase i got in an accident so i wouldn't be trapped in my car..I feel that is bull s*** because why would the state not have known about that? Anyways please some help here before i go back to where i bought it from and give them hell..I drive with 2 little children in the car with me..So i don't want to put them nor myself at risk for an accident..Thanks
#4020 of 4283
Re: Loose Sterring Wheel?? [boston08] by dr_turbo
Aug 30, 2008 (5:58 am)
Reply

Replying to: boston08 (Aug 30, 2008 4:52 am)

Hi, I have a 96 and it does the same thing, up/down movement. It is not suppose to do that but mine has been like that for 4 yrs now. I don't believe it is a safety hazard but should be tightened up. Someone once told me how to tighten that up but never got around to doing it.
Hope someone responds that can tell us exactly where this may be loose and how to tighten it.
 
paul
#4021 of 4283
by boston08
Aug 30, 2008 (8:41 am)
Reply
Thank you Paul for your reply =)
#4022 of 4283
dashboard gages by donnapaca
Sep 03, 2008 (11:33 pm)
Reply
95 aurora
Check engine light with hard shift from park to reverse and hard shift neutral to drive-in the past this has generally been bad pcm. Took to dealer that I have had success in fixing problems in the past. They hooked up code reader and the check engine light was not on, and computer did not store trouble codes. It shifted fine when they tested it, however the gages would not work-84,000 miles and never had this problem. Dealer said they only hooked up code reader, did not do anything else-any ideas?
I have read ignition switch issue-I will try other key. Any other suggestions?
I would appreciate any responses.
#4023 of 4283
Re: 98 aurora low oil pressure at idle after warm up HELP please ! [blk97aurora] by pscheid
Sep 05, 2008 (6:37 am)
Reply

Replying to: blk97aurora (Aug 19, 2008 5:46 pm)

This may be of no benefit to the discussion, but my 98 just turned 101,000 miles and uses 1 quart of 10-30 conventional by about 3,500 miles when I get the oil changed. Over the life of the car, the oil pressure readings have not changed much and, assuming the gauge is not dead on accurate, I haven't been concerned with the oil pressure readings under various operating conditions.
 
Summer idle cold idle ~ 700 rpm: 59 psi
Summer hot idle ~ 700 rpm: 8-9 psi
Summer cruising hot ~ 1950 rpm & 60 mph: 28-34 psi
Winter cold idle ~ 1000 rpm: ?
Winter hot idle ~ 700 rpm: 12-14 psi
Winter cruising after cold start 1950 rpm: 73 psi
Winter cruising hot ~ 1950 rpm & 60 mph: 36-38 psi
 
Original sender, pump, and gauge. I'd be interested if everyone elses' experience is similar.
 
Jack
 
Jack
#4025 of 4283
Re: 98 aurora low oil pressure at idle after warm up HELP please ! [pscheid] by brinwood
Sep 05, 2008 (9:30 am)
Reply

Replying to: pscheid (Sep 05, 2008 6:37 am)

My 97 has the same oil pressures at those RPM's.
I change my oil and filter at 7,000 miles. I use 10-30 Pennzoil and it doesn't use any.
I have 117K on my aurora.
#4026 of 4283
Re: Loose Sterring Wheel?? [boston08] by pepe13pepe
Sep 06, 2008 (12:39 pm)
Reply

Replying to: boston08 (Aug 30, 2008 4:52 am)

I would check your rack and pinion, my 1997 aurora was like that since i bought it in November of 07 and my rack and pinion bushing/bracket snapped about a week ago when i was pulling into a parking spot. The play on the steering wheel is horrible now because nothing is holding the rack and pinion to the frame. So I am thinking that there was a fracture in the bracket before. If you are not too car saavy i would have someone you know how is look underneath at the it and see if there is any damage done to your rack and pinoin or the brackets. good luck. p.s. to get it fixed by a shop will run you about 600-1200 dollars is what ive found
#4027 of 4283
Re: Loose Sterring Wheel?? [boston08] by e_net_rider
Sep 07, 2008 (3:47 am)
Reply

Replying to: boston08 (Aug 30, 2008 4:52 am)

Can you clarify? What exactly moves up and down? Just the wheel flexing at the tilt joint or the whole assembly noticeable at dash junction?
Is there any side play?
Going back to a complaint of mine, wife bought without consulting me. I got in and noticed lots of play, gave wheel a hard shake and upper assembly fell into my lap. At the tilt joint, aluminum castings with a steel pin about 5/8" on each side of column for the joint. At some time one of the pins was replaced with a quarter inch drive socket which was still loose and the shake broke the casting. Whole column was replaced.
Definitely time for removing covers and doing an inspection.
#4028 of 4283
Re: 98 aurora low oil pressure at idle after warm up HELP please ! [blk97au [bdblkab96] by e_net_rider
Sep 07, 2008 (4:07 am)
Reply

Replying to: bdblkab96 (Aug 19, 2008 6:39 pm)

I decided to revisit your comment about knowing noisy lifters because that may be a relative to a specific engine thing. Having known someone with a '65 Mustang 289 High Performance, that thing is noisy at idle always, but then it uses solid lifters. Hydraulic lifters should be much quieter and I don't know about overhead cams. I'd presume them to be even quieter and they may remain near quiet at insufficient oil flow, just not enough to prevent wear.
Your noise level indicating good oil may best be answered by someone who has knowledge of this engine.

Messages Page 403 of 429
1
...
400
401
402
403
404
405
406
...
429
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement