You are here:
Forums
Sedans
Oldsmobile Aurora
Oldsmobile Aurora: Modifications

1164 messages, Last post on May 12, 2009 at 6:08 AM
You are in the Oldsmobile Aurora Forum. Your Hosts are pat & karens
|
|
|---|---|
|
Replying to: cmcmanus (Mar 04, 2006 2:17 pm)
|
|
|
According to the service manager at this former Oldsmobile dealership, the swap is definitely possible. However, it is not recommended. According to the service manager, puting in a 4.6L Northstar would tear up everything behind it (i.e. transmission) becuase of the increased power and torque on an older transmission and car. So if you did it, you would enjoy it, but not for long. Henri |
|
| the harnes works and its less $150 as long as you dont buy it from a dealer ship. some what wierd to use srearing controls for the deck. only thing your headunite neads is to be compatable with a remote becouse the kit uses some wird infared system | |
|
|
|
Does anyone know of a GM AM/FM CD radio with RDS that will work in an Aurora Classic? I bought a 2001 Aurora radio thinking I would be able to find a hack to be able to use the newer theftlock; I'm not trying to do anything illegal as I bought a legitimate radio from a salvage yard. So far, no luck. The different physical connections can probably be overcome but it's a moot point if theftlock cannot be overcome. I looked at aftermarket, but found none that would allow me to continue to use my trunk-mounted CD changer and steering wheel controls (without a clunky add-on box). If there is such a radio, please reply with car model, year, RPO code, and part number if you know. Les '97 Aurora |
|
|
Replying to: black01aurora (Feb 17, 2006 12:06 pm) Also how does the factory projectors hold up aganst the 9006 HID bulbs? |
|
Well I have read most if not all the posts I can find on both sway bars and struts for the classic but to no avail. I was planning to upgrade my rear sway bar with the 22 mm cadillac bar but I wasnt sure what the size on the 99 is because I am under the impression they are bigger than the previous models, at least in the front so I dont want to go through the trouble of swapping if they are the same size. I was also wondering if KYB makes a strut for the 99 because all I have found conscerns the 95-97. I have already installed the caddy strut brace but if anyone else has any suspension recomendations they would be greatly appreciated. Thanks for your time.
|
|
|
|
|
Replying to: zransom (Feb 28, 2007 6:57 pm) I looked for years for KYB struts for my '97. Are you sure KYB lists them now? I still have an STS strut brace that I have not installed because the holes do not line up both side-to-side and front-to-back. I could file larger holes but that would not leave much metal. Did you have that problem with your '99? Les
|
|
|
Replying to: blk97aurora (Mar 01, 2007 4:47 pm) |
|
| I was just wondering what the difference is between the FE0 FE1 and FE3 options on the cadillac rear sway bar. I believe the FE3 is what is normally used on the aurora but will the others work? Thanks. | |
You are here:
Forums
Sedans
Oldsmobile Aurora
Oldsmobile Aurora: Modifications
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2003 Oldsmobile Aurora



Browse by Board
Browse by Topic
Today's Chats