Sign In Join 



Chrysler Sebring Accessories and Modifications

56 messages,  Last post on Oct 16, 2009 at 1:34 PM

You are in the Chrysler Sebring Forum. Your Host is claires

What is this discussion about? Chrysler Sebring, Audio, Exterior, Lights, Tires, Convertible, Sedan


Messages Page 6 of 6
1
2
3
4
5
6
Prev
Next
Last
Go To Msg #
Search This Discussion

#47 of 56
Re: You crack me up - Chrysler FOB [neauxbunny] by tedebear
Sep 24, 2007 (7:37 pm)
Reply

Replying to: neauxbunny (Sep 22, 2007 10:19 am)

The whole "bring the title or registration to the dealership and cough up $100" just burns my toast. The thing probably costs 89 cents to make.
 
Before spending that much on a new fob when all you really need is a new battery you might see if you can gently pry it apart and replace the battery.
 
I just bought an '07 Sebring and the fob has a little notch on one side that appears to be there to allow the owner to replace the battery.
 
If replacing the battery causes it to lose communication with your car you might see if there's a procedure to program it in your manual without getting the dealer involved. There is one for the '07.
#48 of 56
Re: remote reprograming 98 sebring [tee724] by dsans
Apr 18, 2008 (9:51 am)
Reply

Replying to: tee724 (Apr 30, 2007 4:25 pm)

great info, but where is the data link connector? ..and where is pin 1? there's one connector showing on the left under the fuse box apparently for a cable but there are no numbers on it, and some pins in the connector seem to be missing.. the other connector i found under the steering wheel (had to remove the lower dashboard cover) and it has 16 pins but pin 1 is 12v so i dont think that's the right cable.
thanks.
#49 of 56
Re: 2000 Sebring Convert - dead fob [mikebuckley] by neauxbunny
Jul 16, 2008 (7:12 am)
Reply

Replying to: mikebuckley (Sep 21, 2007 7:05 pm)

Actually, the battery was the first thing we checked.
 
Can you tell I am just getting around to looking into this matter again?
 
New battery - dead fob.
 
Has anyone used the ones offered at keylessride.com?
 
da bunny
( neauxbunny = no bunny)
#50 of 56
Re: 2000 Sebring Convert - dead fob [neauxbunny] by tedebear
Jul 16, 2008 (2:35 pm)
Reply

Replying to: neauxbunny (Jul 16, 2008 7:12 am)

You could try reprogramming the one you have. If the battery is okay it is probably working but not sending the right code.
 
Do a Google search or try this link: Reprogram fob 2000 Sebring
#51 of 56
After market sunroof by cliff11
Sep 16, 2008 (8:38 pm)
Reply
Has anyone added an aftermarket sunroof to a Sebring? Is the dealership the best place to inquire, or does anyone have any suggestions?., I am in the Detroit area. Thanks,.
 
Cliff
#52 of 56
Swapping an automatic for a manual.. by bengh
Jan 27, 2009 (1:06 pm)
Reply
I have been having tranny problems for awhile now, made me temporarily ditch my 1998 sebring lxi coupe in my driveway. I am thinking about swapping in a manual transmission into it, but I do not know if there are any compatible trannys out there. I know it will be a lot of work and money, etc, etc, but that doesn't matter to me. I am going to be redoing the entire car. Any suggestions on a manual transmission?
#53 of 56
Replace keyless entry fob by drfea
Mar 16, 2009 (7:59 am)
Reply
We lost our fob for a 1998 Sebring. Just checked with the dealer; $131 for the fob itself, $70 to program. Over $200 plus tax to get one key fob replaced. Any other options besides go without the fob?
#54 of 56
Removing emblem by markvent
May 07, 2009 (10:57 am)
Reply
I just placed a chryler wing emblem with double back adhesive onto the trunk of my 2001 Black Sebring, Well It's a bit crooked.
 
Is thier a safe way to take it off an reapply it safely without removing any paint ?
#55 of 56
License Plate Lights by blittke
Aug 08, 2009 (5:49 am)
Reply
I have an 08 Sebring Convertible. I want to install LED license plate lights to give it the light similar to a Lexus or BMW. Can someone please tell me how to get to the license plate lights?
#56 of 56
Performance parts for 98 sebring coupe by mcquirter
Oct 16, 2009 (1:34 pm)
Reply
Does anyone know how to get some custom parts for the 98 sebring lxi coupe. i been looking at the eclispe engine's they seem alot alike but i dont want to try anything out until im for sure.
 
so if anyone knows of any place i can get performance parts, like a cold air intake, headers etc.
or if the i could use the 2000-2003 eclispe's performance parts. let me know

Messages Page 6 of 6
1
2
3
4
5
6
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement