Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Honda CR-V Honda CR-V Maintenance and Repair
6432 messages, Last post on Nov 07, 2009 at 4:46 PM
You are in the Honda CR-V Forum. Your Hosts are steve_ & tidester
Your Community Leader is varmint.
|
|
|---|---|
|
Replying to: Paulito (Jan 21, 2009 9:17 pm) |
|
|
|
|
I have a new 2009 CR-V EX 2WD. My Innova 3100 scanner will not link and returns the ERR message when trying to link which means the scanner will not link up with the CR-V's diagnostic computer. The scanner works fine on my 1998 Ford Ranger so I know the scanner is working. Anyone else having issues with a scanner not linking?
|
|
|
|
|
Replying to: SalemTheCat (Jan 22, 2009 6:25 pm) |
|
|
Hi, I recently had the battery replaced in my CRV. Now the odometer, outside temp and door open indicators are no longer displaying on the cluster. The backlight for the odometer is lit but no numbers appear. Speedo and other guages all work fine. Mileage is about 72,000km. Any ideas on what might fix this - short of replacing the cluster (yikes!)? Thanks. |
|
| I was going 70mph and all of a sudden my speed started dropping and i put the accelerator all the way to the floor and i still was loosing speed... It was almost as if I was running out of gas but i had over a half a tank.. I pulled over and turned the engine off then it would not start again... what could be the problem? | |
|
Replying to: nolaj (Jan 25, 2009 6:40 am) Regards, OW |
|
|
Replying to: nolaj (Jan 25, 2009 6:40 am) |
|
|
|
|
Replying to: nolaj (Jan 25, 2009 6:40 am) If you are not the original owner, or don't remember the history of the vehicle, check to see if the ignition switch recall has been performed. The easiest way to check of previous recalls and to be notified of new recalls is to register you vehicle at American Honda Owner's Link. You can find the link by going to Honda.com. Also, the valves need to be adjusted, on the loose side of the spec, every 30,000 miles. |
|
|
Replying to: blueiedgod (Jan 26, 2009 11:57 am)
|
|
|
|
|
Replying to: nolaj (Jan 26, 2009 12:20 pm) IF the belt did indeed break, then chances are good that there is engine damage, yes. How much damage remains to be seen once the cylinder head is removed. |
|
You are here:
Forums
SUVs Honda CR-V Honda CR-V Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Honda CR-V
Browse by Board
Browse by Topic
Today's Chats
