You are here:
Forums
SUVs
Honda CR-V
Honda CR-V Maintenance and Repair

6444 messages, Last post on Nov 25, 2009 at 7:39 PM
You are in the Honda CR-V Forum. Your Hosts are steve_ & tidester
Your Community Leader is varmint.
|
I have an 04. The are three dials in the middle of he dash that control heater, fan speed and direction of the heat/ac The one on the left - fan speed I believe is completely dark while the others have backlights on them. I presume there is a little bulb behind them. Looks to me like you would use a little screwdriver just to get behind the inside of the knob (as I see a seam between the knob and the frame of the knob). Is that how to get to that?
|
|
|
Replying to: coldfoot (Oct 04, 2008 5:53 am) My 1997 CR-V just had this same thing happen. Can you share what the final outcome of your wife's probems were? Thanks. |
|
|
|
|
Replying to: theriver (Jan 18, 2009 7:32 am) |
|
|
Replying to: dontknowathing (Jan 11, 2009 9:13 pm) Now the boyfriend deal. Tell him he needs to be out in a week. The day that falls on have a policemen come over to the house and escort him out and have the cop scare him a little, and he should be gone for good. |
|
|
Replying to: hon03 (Jun 21, 2008 10:37 am) Although I replace lights, they still did not get on. Anyone find solution on this ? Please let me know at trysjp
|
|
|
Replying to: trysjp (Jan 21, 2009 7:54 am) It's best to keep the conversation right here so all will benefit. tidester, host SUVs and Smart Shopper
|
|
|
Replying to: tidester (Jan 21, 2009 10:58 am) In my 1999 CR-V, brake lights (aka stop lights) are on the same fuse as the horn. It's a 15-amp fuse located under the hood; check the fuse box label for the one indicating horn and stop lights. If your horn is also out, then they're on the same (blown) fuse. This is the 3rd time I had to replace the fuse in 2 weeks, last time I replaced the fuse I blew the horn the fuse immediately blew (must be a short somewhere in the horn).
|
|
|
|
|
Replying to: Paulito (Jan 21, 2009 9:17 pm) |
|
|
|
|
I have a new 2009 CR-V EX 2WD. My Innova 3100 scanner will not link and returns the ERR message when trying to link which means the scanner will not link up with the CR-V's diagnostic computer. The scanner works fine on my 1998 Ford Ranger so I know the scanner is working. Anyone else having issues with a scanner not linking?
|
|
|
|
|
Replying to: SalemTheCat (Jan 22, 2009 6:25 pm) |
|
You are here:
Forums
SUVs
Honda CR-V
Honda CR-V Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Honda CR-V



Browse by Board
Browse by Topic
Today's Chats