Ask the Car People.SM


Chevrolet Avalanche Accessories & Modifications

250 messages,  Last post on Mar 11, 2010 at 6:27 AM

You are in the Chevrolet Avalanche Forum.

What is this discussion about? Chevrolet Avalanche, Truck

Messages Page 21 of 25

#200 of 250 Wear and Tear? by courtmiester

Sep 16, 2005 (9:45 pm)

I have a 2004 chevrolet avalanche and am considering a 6" lift with a 3" body lift and 36" tires. I am planning on having this truck for a very long time. I am also considering a 6" lift with 33" or 35" tires. Does anyone know what kind of a difference I am going to have with wear and tear on the truck if any? I like the look of the 9" lift all together better but don't want to run into a bunch of problems. Also if the 9" lift is going to be hard on the truck what parts is it exactly going to be hard on and would it be really expensive to fix? If anyone could help me out with this I would really appreciate it.

#201 of 250 Re: Add on roof rack [bradduggan] by crzyavajb

Oct 03, 2005 (5:43 pm)

Replying to: bradduggan (Aug 10, 2001 9:01 am)
I have a white 4x4 avalanche 02 and i was thinking of doing the same thing. i was thinking of yakama rack but which one did you get

#202 of 250 Quad runner in an Avalanche by mjah

Nov 10, 2005 (9:25 pm)

Has anyone ever tried to remove the rails that support the bed tops on an avalanche in order to hold a Quad ATV? Seems that these rails pertrude to far into the bed to ride a quad up into the bed. I was thinking of removing the rails, which will give me the five inches needed.

#203 of 250 Re: any problems with k & n filters? [mdena] by jmath53

Apr 04, 2006 (4:05 pm)

Replying to: mdena (Aug 17, 2005 1:05 pm)
I put a K&N77 on my avy and got better mpg and the growl from the intake is grrreat not to mention a decent gains in the mid range hp from the 3500 rpm up. It was easy to put on but dont try to put on a throttle body spacer it wont work unless you trim the tubing on the K&N. Good luck

#204 of 250 Re: any problems with k & n filters? [jmath53] by txyank1

Apr 05, 2006 (4:33 am)

Replying to: jmath53 (Apr 04, 2006 4:05 pm)
I'm currently running an Airaid tube with a K&N drop-in filter with similar results. Be careful not to over-oil the filter when you re-charge.

#205 of 250 Intake and Exhaust by ralphie2

Apr 29, 2006 (5:16 am)

I added a K&N drop in filter, and a FlowMaster single outlet cat-back system. I've noticed a small increase in mileage and a noticeable increase in pick up. Has anyone installed a Tornado Fuel Saver? If you have, are they worth the $70?

#206 of 250 Re: Intake and Exhaust [ralphie2] by txyank1

May 01, 2006 (5:55 am)

Replying to: ralphie2 (Apr 29, 2006 5:16 am)
No, and by most accounts they are not. Maybe on a carbueratored engine.

#207 of 250 Re: Intake and Exhaust [txyank1] by ralphf

Jun 03, 2006 (9:13 pm)

Replying to: txyank1 (May 01, 2006 5:55 am)
Okay,thanks! You're the only person I've heard from about those things.

#208 of 250 Tranny Cooler by gmaster

Sep 03, 2006 (11:12 pm)

Anyone know if the 2007 Avalanche comes with a transmission cooler. I looked under the hood of one and it looks like it has the connections from the radiator to the tranny area, but did not get a close look. It comes with a hitch and most vehicle sold with a towing package do have the cooler. Anyone know for sure or do you have to have one installed. Also, what about a break controller?

#209 of 250 Looking but dont know where to start by tommylee83

Jun 01, 2007 (6:46 am)

I desperately want the cady convertor that go over the bed rails (dont know the official name). I believe they are clip ons and you just get them pained at a body shop to make your your avalanche look more like an escalade truck. does anyone know what they are called and maybe a website name. I always see them on decked out avalanche trucks

Messages Page 21 of 25

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement