You are here:
Forums
SUVs
Buick Rendezvous
Buick Rendezvous Maintenance and Repair

2196 messages, Last post on Nov 28, 2009 at 1:37 PM
You are in the Buick Rendezvous Forum. Your Hosts are steve_ & tidester
|
Replying to: ddgolf (Feb 25, 2008 11:50 am) |
|
|
Replying to: ddgolf (Feb 25, 2008 11:50 am) |
|
Has anyone found a Hayes or Chilton's or another type of manual on this car yet? Been looking everywhere hoping to find one but apparently this car is not popular enough to have them go to the trouble of coming out with one yet.
|
|
|
Replying to: whitefam (Mar 01, 2008 5:37 am) |
|
|
|
|
Replying to: whitefam (Mar 01, 2008 5:37 am) Buick Rendezvous Repair Manuals (Set)link title |
|
|
Replying to: clm51 (May 15, 2006 3:33 pm)
|
|
|
Replying to: gnewnum (Mar 18, 2008 7:24 pm) Widespread electrical "gremlins" like that usually tie back to the most common of power sources in a car, the battery. I would start by making sure the connections at the battery terminals are solid, tight, and clean. Inspect battery for any evidence of leaking/cracks in its plastic case. |
|
|
Hi I bought a 2003 Rendezvous CX with the exterior liftgate switch, that's located under the liftgate handle on the outside of the liftgate. For some reason that switch does not work. The only way that I can open the liftgate is with the remote. I tried opening the cover (inside the liftgate) for the tail bulb replacement and found out that there is a yellow/black wire with a 2-pin socket at its end hanging there. It seems like that this wire has come lose of the switch and needs to be plugged back in. Now my question is that does anyone know how to remove the panel inside the liftgate to access that switch from inside. If I just remove the panel covering the Tail Lights, that is too high for any work to be performed on the liftgate exterior switch. It seems like the whole panel at the bottom of liftgate needs to be removed. All your answers will be greatly appreciated. Please Help! |
|
|
|
I have a 2004 and my Mode button in the DIC will not work. I can press it until the end of time and no menu appears. The display shows the direction and temp but nothing else. Is there a fuse just for the DIC controls? Could it be disconnected somehow? I got a low tire pressure display, leveled out all the tires and can't reset. What can I do? Thanks!
|
|
|
Replying to: beachmom30 (Mar 24, 2008 6:55 am) I think if you were to disconnect the negative battery terminal for a little while (10 min might do it, overnight might be better) that might clear the warning. If it's just the buttons themselves, they look pretty easy to replace. If you bought a set from your local used auto parts store (aka "junkyard") it probably is something a friend / mechanic could replace at a fairly low cost. |
|
You are here:
Forums
SUVs
Buick Rendezvous
Buick Rendezvous Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2007 Buick Rendezvous



Browse by Board
Browse by Topic
Today's Chats