Ask the Car People.SM


Yukon Owners: Photo Gallery

21 messages,  Last post on Jan 12, 2012 at 10:44 AM

You are in the GMC Yukon Forum.

What is this discussion about? GMC Yukon, GMC Yukon XL, GMC Yukon Denali, SUV

Messages Page 3 of 3

#18 of 21 2006 Yukon Bose Stereo Subwoofer by cgunther1

Jul 16, 2009 (11:25 am)

I have an 2006 Yukon XL with the Bose stereo and I want to upgrade the subwoofer that is in the center console. I have heard there is an after market kit that will allow a 10" in the existing space. Does anyone have any knowledge of this and does it make a significant difference with the bass, where would the amp go?

#19 of 21 Re: Sylvania/HID look headlight replacement for 07 Denali [ukon07] by rsht

Oct 31, 2009 (5:31 pm)

Replying to: ukon07 (Feb 22, 2007 9:33 pm)
Probably late to reply, but the 07 Denali headlight uses the H13 or aka 9008 bulbs. To replace the bulbs, there is absolutely NO need to remove the head lamp assembly by taring open the wheel shroud (like the service manual described)... you can gain access to the bulbs by removing the plastic anchors to the splash shield (I think its made of some kind of tar sheet...) on the passenger side in front of the Air filter canister; for the driver side, only remove the top anchor (loop for the cables to the hood latch) right next to the windshield washer fluid tank... Yeah, the available is pretty limited, but, in my opinion its whole lot less work to get to them bulbs. PS. the head lamp assembly does not come out that easily even you have all the screws removed as described. BTW, I replaced my standard helogen bulbs with PIAA H13 Xtreme white plus bulbs... very nice and bright.

#20 of 21 Re: Sylvania/HID look headlight replacement for 07 Denali [rsht] by c5_4fun

Apr 01, 2011 (1:47 pm)

Replying to: rsht (Oct 31, 2009 5:31 pm)
I like this trick of accessing the light bulb on the drivers side right next to the windshield washer tank...while it's a small opening, it seems the easiest way to access the light bulb area. However, I cannot get the bulb loose. Does anyone know if you unplug the bulb first, or if you turn the assembly one way or the other to get the bulb out, or do you push the assembly in and then turn, etc.. I have pulled and tried to twist but cannot get anything loose.

#21 of 21 OME Towing Parts by russswift

Jan 12, 2012 (10:44 am)

New (3d) owner of a 2005 Yukon XL. Can anyone tell me where to find the the following items, or to determine if I should or should not have them? Thanx.
Four-Wire Harness Adapter &
Electric Brake Control Jumper

Messages Page 3 of 3

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement