Last post on Jan 12, 2012 at 10:44 AM
You are in the GMC Yukon
What is this discussion about?
GMC Yukon, GMC Yukon XL, GMC Yukon Denali, SUV
#12 of 21 2006 Yukon XL Floormats vs. 2007 Yukon XL Floormats
Feb 01, 2007 (9:06 pm)
I need some new floormats for my '06 Yukon XL and have an opportunity to get some new ones from an '07 at a great price. However, can someone tell me if GMC has changed the interior so much that they are not interchangeable??
#13 of 21 Re: 2006 Yukon XL Floormats vs. 2007 Yukon XL Floormats [juddster]
Feb 02, 2007 (8:20 am)
The rear (Second and Third) sections are mostly changed from 2006 to 2007 to be larger. Since you are coming the other way from 07 floor mats to 06, they should give you a fuller coverage, but, the contour/shape are different especially from the middle isle getting in to the third roll from between the 2 captain seats. I can not say for sure about the front D/P sides. Oh BTW, my 07 Yukon Denali 3rd roll floor mat is a one piece cargo mat (from WeatherTech) covering the entire rear section and under the 3rd roll seat... I guess you don't have the choice to try them out before getting them... ? Good Luck!
#14 of 21 Re: 2006 Yukon XL Floormats vs. 2007 Yukon XL Floormats [rsht]
Feb 03, 2007 (6:07 pm)
Thanks...that helps me enough to know that I should just keep looking until I find a deal on '06 mats.
Take 'er easy.
#15 of 21 Sylvania/HID look headlight replacement for 07 Denali
Feb 22, 2007 (9:33 pm)
Anyone know the replacement bulb for the headlights? It isn't up on the Sylvania website yet. It's a lease so I don't want to put in real HID's. FYI, I had them installed on my 02 Escalade and they were great. Thanks BB
Oct 16, 2008 (6:49 pm)
does anyone know where i could find a replacement subwoofer for the back of my yukon xl.. its and 8" and i went and bought a JL audio one but it wouldnt fit so idk what to do except buy a new box but i dont want to do that
#17 of 21 2006 Yukon Denali XL
May 09, 2009 (6:55 pm)
I am in the process of purchasing a Denali that has been wrecked and having it repaired. One thing I cannot tell at the moment is some features about the audio system. This one has the navigation system with 6 disc changer. My questions are 3:
1 - Does the 2006 music system have an aux in somewhere? Could not find it.
2 - Does the CD Disc changer or other disc play mp3 CDs?
3 - Could it possibly have a backup camera?
#18 of 21 2006 Yukon Bose Stereo Subwoofer
Jul 16, 2009 (11:25 am)
I have an 2006 Yukon XL with the Bose stereo and I want to upgrade the subwoofer that is in the center console. I have heard there is an after market kit that will allow a 10" in the existing space. Does anyone have any knowledge of this and does it make a significant difference with the bass, where would the amp go?
#19 of 21 Re: Sylvania/HID look headlight replacement for 07 Denali [ukon07]
Oct 31, 2009 (5:31 pm)
Probably late to reply, but the 07 Denali headlight uses the H13 or aka 9008 bulbs. To replace the bulbs, there is absolutely NO need to remove the head lamp assembly by taring open the wheel shroud (like the service manual described)... you can gain access to the bulbs by removing the plastic anchors to the splash shield (I think its made of some kind of tar sheet...) on the passenger side in front of the Air filter canister; for the driver side, only remove the top anchor (loop for the cables to the hood latch) right next to the windshield washer fluid tank... Yeah, the available is pretty limited, but, in my opinion its whole lot less work to get to them bulbs. PS. the head lamp assembly does not come out that easily even you have all the screws removed as described. BTW, I replaced my standard helogen bulbs with PIAA H13 Xtreme white plus bulbs... very nice and bright.
#20 of 21 Re: Sylvania/HID look headlight replacement for 07 Denali [rsht]
Apr 01, 2011 (1:47 pm)
I like this trick of accessing the light bulb on the drivers side right next to the windshield washer tank...while it's a small opening, it seems the easiest way to access the light bulb area. However, I cannot get the bulb loose. Does anyone know if you unplug the bulb first, or if you turn the assembly one way or the other to get the bulb out, or do you push the assembly in and then turn, etc.. I have pulled and tried to twist but cannot get anything loose.
#21 of 21 OME Towing Parts
Jan 12, 2012 (10:44 am)
New (3d) owner of a 2005 Yukon XL. Can anyone tell me where to find the the following items, or to determine if I should or should not have them? Thanx.
Four-Wire Harness Adapter &
Electric Brake Control Jumper