You are here:
Forums
Maintenance & Repair
Tire gauges

71 messages, Last post on Nov 14, 2007 at 7:35 PM
You are in the Maintenance & Repair Forum. Your Host is mr_shiftright
|
the warning label should include wearing a mouth guard and a groin protector just in case the gauge would do something funny |
|
My trusty old Brookstone dial guage just turned 25, given to me by my wife in 1976. Made in USA & used every weekend since new. Just bought 2 new Brookstone tire guages which are now rubber-coated but still made in US, for gifts. Checked the new ones against the 25 year old model on a tire & reading was the same for all 3. Cost is now $10 each.
|
|
|
I want to thank you for great information in a controlled test. I just happen to have purchased 2 of the Accutire gauges at Sears for $8.99 ea (on sale) about a month ago. After calibrating, they read about 0.5 lbs within each other. Funny thing, my old pen "pop up" type gave me the same reading as the Accutire. Still, I trust the digital more. Again, thanks. greg |
|
| But I didn't see this topic until now. I had gone out and purchased a very rugged analog gauge made by "Meiser". Its solid brass covered in rubber and has a short hose attached for pushing against the tire valve. It seems to be very accurate but I don't have anything to compare it against. It also has another nice feature, a bleeding valve. If your tire is over inflated, keep the gauge's hose attached to the tire a push the bleeding button to lower the pressure in a very controlled manner. Although the gauge is marked in 1 lb increments, I can see differences of about one tenth pound. Has anyone else come across this unit? | |
|
I just got my first van (Toyota) and am not quite used to dirving one yet. Today while turning in a corner, my right rear wheel rubbed/swiped the curb (gutter). I am worried that I might have mis-aligned my wheel. Would anyone know, if I did (aside from getting symptoms on my tire later on or going for an expensive wheel alignment check? |
|
|
|
| If you like "analog" stick gauges, take a look at the made-in-America gauges at your local NAPA store. They are excellent, accurate, and sell for $4-$5. You can't beat them. | |
| Is the radio shack digital gauge the same as the accutire? They look almost identical. | |
|
I bought a pencil type gauge years ago. It was a Camel and came highly rated by CR. I tested against my new digital gauge and they both got the same results. I am happy to say that I did not have to wear special gears while testing... thank you for you time! Oh.. I do prefer the digital better even though the pencil is almost as accurate since the digital is within .5 psi. The battery of the digital should last for thousand of uses.... I won't be around to verify that though. |
|
|
|
|
Batteries wear out whether used or not. At the end of their lives, they have a downward curve of voltage loss that will adversely affect accuracy. Electric instruments are delicate compared to pneumatic instruments. I'll stick with the metal cased old style gauges. |
|
What do you expect for a tool that only cost $1, $4, or even $12. An accurate air pressure guage is gonna cost $50-$75. On a daily driven street car or pick-up 2 or 3 pounds isn't going to make any noticable difference in performance. The important thing is that all 4 tires are the same pressure. Buy a cheap $4 stick guage and forget about batteries. If all 4 tires are 2 pounds too high or 1 1/2 pounds too low, the average person will never be able to tell the difference. As long as all 4 tires are the same that's all that's important. I have learned through experence at the race track never barrow your friends guage. I only set up my race car with my guage not to say it is accurate, but a guage that is 1 pound off will always be 1 pound off.
|
|
You are here:
Forums
Maintenance & Repair
Tire gauges
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle


Browse by Board
Browse by Topic
Today's Chats