You are here:
Forums
Coupes & Convertibles
Mazda Miata
Mazda MX-5 Miata Accessories & Modifications

114 messages, Last post on Sep 12, 2009 at 4:51 PM
You are in the Mazda Miata Forum. Your Host is claires
| Any recommendations? - I have a black cloth top. | |
My 97 Miata has stock 14" wheels and tires. I'm considering increasing to 17" wheels with 205 40 17 tires. Has anyone done this to their first generation Miata? How do they fit? Are you satisfied with the look, ride, and handling? How much harder is the ride with these low profile tires? I also want to go with all season tires. Any suggestions on tire and wheel brands.
|
|
Has anyone had a clear bra put on their MX-5? I had one done by the dealer on my new MX-5 but was wondering a few things. First, they only put it on the front of the hood and not the front bumper at all. The dealer said the bumpers are designed to withstand small chips etc. Is that right? Second, I was wondering how these hold up over the years. They say for maintenance I should wash and wax it like the rest of the car. Any experience in this area you wish to share? Lastly, has anyone put this on their car themselves? How hard was that to do? Thanks.
|
|
|
Here is a link to a calculator because it is important that if you increase your wheel size or change the profile, that you have your speedometer re calculated or that you know you will not be going to same speed as your speedo claims because it will be changing the ratio... Here is the link link title go there and check it out! |
|
|
Replying to: miata97 (Aug 18, 2006 3:53 am) Here's what I mean - the stock 14"x6" rims weigh just 12 lbs or so. The BBS rims on some SE models weighed just *nine* pounds. Even forged 17"s will probably weight close to double, maybe even more. You'll have to swap out the whole suspension else the wheel will be hopping up and down overwhelming the shocks that just can't handle that kind of unsprung weight. I just think 17" is too radical. That's my opinion, anyway. -juice |
|
|
Replying to: philmx5 (Aug 18, 2006 8:02 am)
|
|
| Any recommendations for a 2006 MX-5? | |
|
Replying to: manybmws (Aug 21, 2006 4:24 pm)
|
|
|
Replying to: philmx5 (Aug 25, 2006 12:59 pm) I had quotes ranging from $500 to $599 for mine. I will get it done after I take it out of Winter storage. I did it to my 530i - the entire front - 3 years ago and it has eliminated any front end scaring. |
|
Robbins from what I can tell is the major manufacturer of aftermarket soft tops. You can get cloth, vinyl and many different configurations. One of the configurations I am interested in is a zipperless glass window top. You can find them at MossMotors as well as other online websites. Miata.net is a great resource to access these different sites. They don't however have a forum thats as comprehensive as this one. Good luck!
|
|
You are here:
Forums
Coupes & Convertibles
Mazda Miata
Mazda MX-5 Miata Accessories & Modifications
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Mazda MX-5 Miata



Browse by Board
Browse by Topic
Today's Chats