Last post on Sep 12, 2009 at 4:51 PM
You are in the Mazda Miata
What is this discussion about?
Mazda MX-5 Miata
#105 of 114 Performance and Accs
Jun 02, 2008 (12:46 pm)
Hi everyone- I'm from So. eastern centeral Calif in the Tehachapi mountain range which is 38 miles east of Bakersfield and 35 miles northwest of Palmdale and Lancaster Calif. My wife and I have a '06 MX-5 w/ auto trans. . .what a kick! I have installed a Kn Cold Air Filter-57A6023 which you can get from KN or order it from Auto Zone. This gives about 5-6 added hp. It is easy to install, TAKE YOUR TIME and read instructions carefully. I am running Royal Purple 5-20. No problems. I also run 36 psi in the Yoka's dvan A11A, the door sticker says 29 but in our type of driving we get an additional 3-4 miles/gal. My next set of tires are going to be General Altimax HP. Check out Tire Rack's site as well as Good-Win-Racing here in Calif-GREAT STUFF and Forum HAPPY MOTORING & ZOOOOOM ZOOOOM!
#106 of 114 Re: Performance and Accs [emcmx5]
Jun 02, 2008 (2:16 pm)
Good Day, I just bought my first miata about 2 weeks ago and I am looking into some performance mods. I read about a few and then read about they were not worth the time and cash. need someones opinion. I want to do the following.: major tune up plug wires etc, But I read that the splitfire plugs recommended are bad news for the engine in that it misses ,bogs down and even the electrodes break. Headers -heard of only about 4 HP increase, Cold air intake but which one? I am in NC in a town near Charlotte My name is Earl. Any help appreciated!
#107 of 114 Re: Performance and Accs [red1993]
Jun 02, 2008 (2:29 pm)
Hi Earl- -Here are some suggestions re 'tune-up'. I have found that if you stay with "NGK' brand plug wires and plugs you CAN'T go wrong. Look up 'NGK's' web site for plugs and wires. Cold air intake- KN 57A6023 for NC 2006 and up. Check out Good Win Racing for headers and exhaust(s). Also look at Miatamania.com for a full list of racing and performance stuff. Let us all know . ZOOOOOOOOOOOOOM ZOOOOOOOOOOOM.
Jan 04, 2009 (10:40 pm)
I have an old 1991 Mazda Miata an I really like it. But I would also like to fix it up with a new body kit. Is there any that are more recomended than others? keeping a low price range. (I'm also starting to like the hard tops). Any advice would be great the more i learn the better.
#110 of 114 Exhaust resonators
May 13, 2009 (12:23 pm)
The tone of the stock exhaust on my 2008 seems to have a deep growl....deeper than a typical 4 cyl rice burner a 16 yr old might drive, but how much effect would removing the resonator tips have on the sound ? I'd rather have it deep & quieter than louder & tinny.
May 13, 2009 (5:47 pm)
How much is reasonable to pay for set of new brake pads (all 4)
plus rotors (front set only)
plus labor charge ????
Have a '04 model
#112 of 114 MX-5 Badge
May 14, 2009 (2:35 pm)
Does anyone know a low cost source for the "MX-5" trunk/tailight badge on a 2006 or newer Miata ? The dealers are charging about $30 for the adhesive badge....is that the best deal available ? Any de-badgers out there with wares to sell ?
Sep 11, 2009 (11:08 pm)
I am looking for a new rear finish panel... either red or unpainted. Where can I find one? Will be for a 1990 Miata convertible.
#114 of 114 Re: MX-5 Badge [dugl]
Sep 12, 2009 (4:51 pm)
I'm debadged, and my MX5 badge is in perfect shape. Make me an offer!
(reply to onerpm -at- yahoo.com)