Last post on May 13, 2013 at 10:28 PM
You are in the Jeep Cherokee and Jeep Grand Cherokee
What is this discussion about?
Jeep Grand Cherokee, Jeep Cherokee, SUV
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#4815 of 5133 Re: 2000 Jeep Grand Cherokee POWERTRAIN [etomori]
Oct 23, 2010 (5:07 pm)
Thanks for the info, I am looking for a rebuilt or junker motor now. You were right, 3 yr. 36000. The oil was clean as a whistle, I do check it somewhat regularly and I have lifetime oil changes from the dealer. Could it have 'dry fired' and still been drivable but just damaged? A friend worked on it as a favor--it was only supposed to get a new radiator, it had a fresh filter and oil when I got it back. Currently I am bumming rides to work as I have not yet paid for the original work just done on it.
#4816 of 5133 heater fuse blows when ignition is turned on
Oct 25, 2010 (7:15 am)
when i turn the ignition key to on the fuse for the heater/ac blows. at first the turn signal stopped working when the heater /ac fuse blew. I replaced the fuse. the turn signal and heater worked for 2 days then the fuse blew. I removed the fuse for the heater/ac and the turn signal would work for a day or 2 then stop then work again. now when I turn the ignition on the ac/ heater fuse blows immediately. the fuse blows when the heater/ac controls are off. I down loaded a fuse box diagram from wjjeep.com/fuses and it states that fuse # 20 10amp controls ignition run/ heater/ac,/left and right turn signal sense and heated seats. I do not have heated seats. what is ignition run and left and right turn signal sense? could one of these circuits be the one that is blowing the fuse? I disconnected the ac compressor and inside the engine I removed the 15amp fuse and a relay for the ac clutch and a 40 amp fuse for the blower motor the fuse still blows when I turn on the ignition with all heater controls off. what fuse controls the turn signal. I hope you can help me with this problem
#4817 of 5133 Re: 95 Grand Cherokee wont start [rwengr]
Oct 25, 2010 (8:24 am)
I checked for a vacuum leak. Found one hose that wasnt holding vacuum. Was leaking out t connectors. Repaired the line and still made no difference. This year jeep doesnt have an egr valve on the 6 cylinder so couldnt replace that. Dis replace the coolant temp sensor still no difference.
#4818 of 5133 Re: 95 Grand Cherokee wont start [taffy3]
Oct 25, 2010 (8:25 am)
Changed the relays and did not solve the problem.
#4819 of 5133 Re: 95 Grand Cherokee wont start [uncfuz]
Oct 25, 2010 (8:30 am)
Finally got the car running. Had plenty of suggestions everything from vacuum leaks relays fuel pumps sensor to the main brain. I appreciate all the help and suggestions. I did finally give up cause was not going to keep buying this and that only to find out it wasnt the cause. Even though hate letting someone else fix my cars had it towed away. They claim they replaced the coil, plugs and cleaned gunk out of the throttle body. They confirmed that yes there was spark present but said it was too weak and not able to ignite the fuel. I always thought spark was spark but guess if its not strong enough it wont work. So learned something new. Thanks for all the help.
Oct 29, 2010 (7:16 am)
Let me first start off by saying that I know absolutely NOTHING about cars. Now to my problem... I parked my Jeep in the driveway after work one day, then I had a day off, then I went to start it up and the darn thing was dead. It wasn't making any noise whatsoever. So I took it to Monroe and they put in a new starter and did an oil change for $288. (I know that seems high, but that's what Jeep said it would cost too. I did it at Monroe because it had to be towed and they were closer...) Anyway, no big surprise, but that didn't work. It was at least making noise after that though, so I figured it helped. Next, I sucked it up and towed it to Jeep. Jeep replaced the CAM Sensor and the CAM Drive for $650. (They quoted me $650 and then tried to charge me $695 when I went to pick it up, then when I complained the parts were magically less money and the computer screwed up. Bastards.) I don't know what those parts are or what they do, but the car at least drives now. The car needs to be inspected this month too, and the service writer at the dealership told me I needed to drive it 100-150 miles before it would pass the inspection (something about failing for readiness??) Anyway, I took it to work two days in a row and on the 2nd day the check engine light came on. The car is loud and it feels like it's driving rough. The only way to describe it is that it sounds like it's sputtering almost and it feels like it's having a heck of a time running -- like it's going to die at any minute. I don't have anymore money to blow on this car, and Jeep told me to bring it in again, but I'd have to pay another $95 diagnostic fee if they run the codes and it's not related to the Cam Sensor or the Cam Drive. I'm really hesitant to take it in if I'm going to have to pay again because I'm beyond over budget this month.
**Edit** After a bit of searching on the internet I found how to get to the OBD system. I did what they said (turn it on turn it off 4 times) and the code was P0138. I googled that and it said O2 Sensor. The car hasn't really been driven (except going to work the last 2 days) in over a month -- could it be the gas? Should I try throwing in a bottle of fuel injector cleaner (a suggestion from a website) and seeing if that solves the problem? Will the light turn off on its own if that's it or will I have to disconnect the battery? How long would I have to drive it to know if that works?
#4821 of 5133 blender door replacement
Nov 01, 2010 (6:21 pm)
I am attempting to replace the blender door on my 2002 jeep grand Cherokee. What is the easiest way to get to the blender door on the drivers side?
#4822 of 5133 Re: foggy headlights? [loosenut]
Nov 12, 2010 (6:35 pm)
I had the same deal. Looked everywhere I could for a solution. Went to Rock Auto and bought new l & r headlight assemblies for $15 each. Even came with bulbs. Just a good tug and out they come. Give them a firm press back in and there good as new. 2 years later still crisp and clear.
#4823 of 5133 Re: Check Engine Light [ihatemyjeep1]
Nov 12, 2010 (6:49 pm)
I just wanted to share an update with everyone. I disconnected the battery and reconnected it to reset the check engine light. Then I put a bottle of fuel injector cleaner in the gas tank (it was half full, I used the STP stuff in the black bottle) and let it run through. So far so good.
#4824 of 5133 Re: foggy headlights? [rknighton]
Nov 15, 2010 (11:24 am)
great price for headlight lenses! you got a website?-cause a friend just got a -86 subie gl wagon,and both headlights are about as bad as ive ever seen!
or,is this"rock auto" a store,or boneyard? any help would be GREATLY appreciated..