Sign In Join 



Jeep Grand Cherokee Maintenance and Repair

4623 messages,  Last post on Dec 09, 2009 at 3:03 AM

You are in the Jeep Cherokee and Jeep Grand Cherokee Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Grand Cherokee, Jeep Cherokee, SUV


Messages Page 448 of 463
1
...
445
446
447
448
449
450
451
...
463
Prev
Next
Last
Go To Msg #
Search This Discussion

#4465 of 4623
Re: Did I make a mistake buying a Jeep???? [cavman2x] by dresdondoll
May 29, 2009 (7:00 am)
Reply

Replying to: cavman2x (Apr 01, 2001 3:16 pm)

I have exactly the same problem with my 2004 Jeep GC. I bought it 2 years ago & noticed the same thing as soon as I drove off the Patrick Pontiac lot. I took it back to them & naturally, they couldn't find anything. Since then I had Elmer's, my regular mechanic, diagnose the steering column replacement and tell me to take it back to Patrick because it's a $1000 job. I did this, & again, they did not find this problem. I don't regret buying my Jeep; I regret who I bought it from. I'm going to Vision for 3rd opinion and then most likely will have my trustworthy guys at Elmer's fix it. Good Luck
#4466 of 4623
vibration by samcoolsam
May 30, 2009 (1:57 am)
Reply
hi all, I have a 2000 cherokee classic and it drives so well but between 80 and 100 km/h the front wheels vibrates quite much but more than a 100 or less than 80 I feel no vibrations at all , what do you think is wrong? and what should I do?
#4467 of 4623
Re: vibration [samcoolsam] by trek87
May 30, 2009 (4:28 am)
Reply

Replying to: samcoolsam (May 30, 2009 1:57 am)

this kind of vibration at a specific speed usually indicates that you need to get your tires balanced. i recommend a computerized road-force balance if your shop has one. good luck!
#4468 of 4623
Outside rear view mirror by clipkarn
May 30, 2009 (11:36 am)
Reply
Does anyone know if you can pop the glass assembly (mirror and frame) out of the mirror shell? If so, how do you do it? I'm trying not to have a painting event.
#4469 of 4623
Shutting off and Low oil pressure on dashboard by rob1231
May 30, 2009 (1:01 pm)
Reply
Hello all,
 
I have purchased a used 2000 jeep grand cherokee laredo 4.0l 6 cyl with 132,000 miles on it.I have been having problems with it shutting off on me,have noticed that the oil pressure on the dashboard appears to stay on or near 0.The only time that it will go up to the halfway mark is if i am driving but once i come to a stop it goes back down again.Please help me.
 
I have purchased a New Oil pressure switch ,Fuel Pressure Regulator,Complete Fuel Pump Assembly,Oil Pump Assembly,Oil Pan Gasket,Have replaced the Oil,Oil Filter on it twice.
 
I am in need of a tune up,will try to do that within the week.I would appreciate any help on this matter as i need this vehicle to get to work or to assist me in finding work where there isn't any public transportation available.
#4471 of 4623
automatic shutdown relay by stew79
Jun 03, 2009 (7:52 am)
Reply
the fuse was blown i replaced it and put it in drive and it blew again. put a new one in and was able to drive it. is there something that i should be concerned about.
#4472 of 4623
Transmission only moves the car at high RPMs. by rhdriver
Jun 05, 2009 (11:27 am)
Reply
I just purchase a 1999 Jeep Cherokee, 6 cil and 2 WD. The transmission only moves the vehicle when rev up at high RPMs. Can anyone provide input as to the possible causes of this problem before I pay someone to rebuild the transmission?
 
Also, I look under the transmission and the drain plug has a “DII” written on it. Does this mean the transmission uses Dextron II ATF? I read in other posts and in the Auto zone website that 1999 Jeep model uses ATF-4 with the 30RH transmission or Mercon V, Castrol domestic multi vehicle ATF, and Castrol high mileage ATF with the AW-4 transmission.
 
Lastly, is there any way to drain the torque converter without any machinery?
 
Thank you all for your advice,
#4473 of 4623
High rpm /transmission engagement by smokebee
Jun 06, 2009 (7:37 am)
Reply
These trans have some computer control exerted on them. Try this. Take the negative battery cable off. let set 5 min or so. reconnect. put key in switch and with your foot on the brake turn key(not to start)--on off, on off, on off, release the foot brake. start engine and see if trans engages a low RPM. The steps you have performed cause a reset of the computer---it has cured problems in many instances.
S Swann
#4474 of 4623
1995 jeep grand cherokee by highmaint
Jun 09, 2009 (11:30 am)
Reply
won't turn over acts like its not get fuel .been sitting for a while. changed out relay. what should i try next?

Messages Page 448 of 463
1
...
445
446
447
448
449
450
451
...
463
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement