Last post on Oct 18, 2013 at 9:23 PM
You are in the Toyota Highlander
What is this discussion about?
Toyota Highlander, SUV
#1436 of 1440 2013 Highlander - Door Edge Guards & Side Molding
Feb 15, 2013 (1:37 pm)
When I purchased my 2013 Highlander it had the side molding on the doors. I want to add the Toyota door edge guards. There is about 1/8" from the end of the side molding to the edge of the door. I have asked parts dept., Toyota parts suppliers, and even Toyota whether you can install the door edge guard with side molding installed. For some reason no one has been able to answer my question. Has anyone installed door edge guards when there is side molding installed?
#1437 of 1440 Re: 2013 Highlander - Door Edge Guards & Side Molding [98bluewave]
by Stever@Edmunds HOST
Feb 15, 2013 (1:47 pm)
I wonder if you could order a set and do a "dry fit" install to see if they work. And then return them and get your money back if they don't work?
Watch out for a restocking fee if you decide to go this route.
#1438 of 1440 Re: 2013 Highlander - Door Edge Guards & Side Molding [98bluewave]
Feb 15, 2013 (6:27 pm)
I saw a car yesterday that had both the side moldings and edge guards. They just split the door edge guard into two parts--one went above the molding, and the other half was installed below the molding. I thought it looked OK. The moldings were the same color as the body, and the edge guards were black It might look a little different if you have a white car with black edge guards or some other color combination. This is just a suggestion.
Another thing you might try is to trim away the part of the edge guard that interferes with the side molding. It might be a little difficult to do, but if you take your time, this might work out for you. Good luck.
Feb 21, 2013 (9:40 am)
I have a 2013 Highlander Plus an would like to install Sirius/XM radio. Is there anyway to hardwire it through the current factory radio or do I have to go after market installation?
Oct 18, 2013 (9:23 pm)
I was wondering if anyone on here could help me out. I have a 2008 highlander hybrid with a third row seat. Does anyone know if it is possible to replace the solid seat with the newer split folding rear seat?