You are here:
Forums
Sedans
Chevrolet Impala
Chevrolet Impala Accessories & Modifications

778 messages, Last post on Oct 16, 2009 at 9:12 AM
You are in the Chevrolet Impala Forum. Your Hosts are pat & karens
|
The undercoating spray I used is just the generic type available at any auto store. It's esay to use; - a little smelly and messy so don't wear your good white shirt and do wear mask and gloves. I brushed/wiped everything just to minimize the dusty dirt and then sprayed a few layers on. The undercoating layer provides a different "harmonic" to the NHV factor and makes the noise level inside the car a litte quieter. I am also working on applying a new rubber seal around the doors to supplement the seals already there. I'm using the foam tape and experimenting. Let's see what happens ..... The fender liners are easy to get out ... just look for the fasteners and keep your eyes open as to reinstalling... "look good, feel good, do good !!" |
|
| What is the best cold air intake for my new LS??? | |
|
Replying to: kaosj (Jun 07, 2004 2:16 pm) |
|
|
|
|
Replying to: audiocrazy (May 01, 2001 12:15 pm)
|
|
|
|
|
what kind of air intake upgrades can I make on my 2000 Impala(3400 engine)? I'm hoping to increase fuel efficiency as well as overall power. |
|
|
Replying to: base02impala (Apr 05, 2005 12:05 pm)
|
|
|
Replying to: mkulina (Oct 26, 2004 4:12 am) |
|
|
i'm wanting to put some 20's on my impala, but seen the 20's i like also come in 22's... is the lug pattern 5-115 or 5-114.3? the fitments for the 22's for the 5-114.3 wheels, the offset is +35, which i'm pretty sure matches up well (its a 22x9.5)... now the 5-115's, the offset is +15.. how bad will that stick out.. |
|
You are here:
Forums
Sedans
Chevrolet Impala
Chevrolet Impala Accessories & Modifications
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Impala



Browse by Board
Browse by Topic
Today's Chats