You are here: Forums Sedans Mazda Protege Mazda Protege Accessories and Modifications

Mazda Protege Accessories and Modifications

1220 messages,  Last post on Jul 11, 2009 at 11:33 AM

You are in the Mazda Protege Forum. Your Hosts are pat & karens

What is this discussion about? Mazda Protege, Mazda Protege5, Sedan, Wagon

Messages Page 120 of 122 1 ... 116 117 118 119 120 121 122 Prev Next Last

Go To Msg # Search This Discussion

#1191 of 1220 Re: Clear side signals for protege5? [ilovedesmoines] by civiletti Apr 03, 2006 (10:53 am)
Replying to: ilovedesmoines (Feb 20, 2006 9:27 pm) Try corksport.com or EBay
#1192 of 1220 Re: 6 disc changer [meinrad] by brb588 Apr 20, 2006 (2:11 pm)
Replying to: meinrad (Aug 03, 2004 9:29 am) Hey... did you do anything special? I bought everything you did, installed it myself and it didn't work. Then I brought it to Best Buy and it still didn't work. I got the parts swapped and it still doesn't work. Can anyone help? Is it my factory radio?
#1193 of 1220 Re: Protege 5 roof rail adjustment [nathanael77] by rgoodlett May 11, 2006 (4:51 pm)
Replying to: nathanael77 (Dec 26, 2005 3:13 pm) I need some help removing roof rack. I have a 2002 Protege 5. I got the two bars off. Do the black plastic rails attached to the roof come off? And if so, will i need to plug any sort of holes left in the roof? Thanks for any help anyone has.
#1194 of 1220 Roof rack. by mazdafun May 11, 2006 (5:16 pm)
You could remove them, but you'd have to remove all the hardware bolted into the slots and get the trim pieces that are fitted into those slots (as the ones w/o roof racks are fitted).   If your P5 came with a roof rack, it also should have come with some plastic pieces that plug the "holes" that are left when you remove the cross bars. It's much easier to just snap these into place than remove all the hardware.
#1195 of 1220 Speaker depth on A 99 mazda protege by matqc20 May 24, 2006 (5:27 pm)
Hello. i have searched everywhere for the speaker depths on a 99 mazda protege. The reason is that I am buying a whole new audio system for my car ( about 4000$). I am wanting to put 2 x 6,5" component speakers in the front. Now in mazda protege's the speakers are 6x8... so I am going to have to make some mdf baffles so the speakers stay in place. I wanted to know the mounting depth of the factory speakers so I can choose some good 6,5" that will actually fit in the door. Thx. Replies to this message: alternator (May 25, 2006 11:52 am) matqc20 (May 26, 2006 3:30 am) alternator (May 26, 2006 8:06 pm)
#1196 of 1220 Re: Speaker depth on A 99 mazda protege [matqc20] by alternator May 25, 2006 (11:52 am)
Replying to: matqc20 (May 24, 2006 5:27 pm) http://www.crutchfield.com shows 2+7/16" as the largest depth speaker they say will fit the front doors in a 1999 Mazda Protege. That web site will show you many speakers that will fit your Protege.
#1197 of 1220 Re: Speaker depth on A 99 mazda protege [matqc20] by matqc20 May 26, 2006 (3:30 am)
Replying to: matqc20 (May 24, 2006 5:27 pm) The speakers I am getting are 2 3/4" .... do you think they will fit? If not... well I need to make a mdf baffle anyway.. so I could make the baffle like 1/2" so the speakers wont touch the door panel and will fit. I am also putting soem deadener and some overkill to kill vibrations and distortion.. that will also take about 3/4 of an inch if not more. I think the speakers should fit Replies to this message: alternator (May 26, 2006 8:06 pm)
#1198 of 1220 Re: Speaker depth on A 99 mazda protege [matqc20] by alternator May 26, 2006 (8:06 pm)
Replying to: matqc20 (May 26, 2006 3:30 am) I took a second look at Crutchfield and found that they offer two speakers with 2+5/8" depth that they say will fit 1999 Mazda Protege front doors. But that's not to say that there may actually be more depth than that available. Good luck.

Messages Page 120 of 122 1 ... 116 117 118 119 120 121 122 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Mazda Protege Mazda Protege Accessories and Modifications