Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Ford Ranger Ford Ranger Maintenance and Repair
2719 messages, Last post on Aug 29, 2008 at 1:04 PM
You are in the Ford Ranger Forum. Your Host is kcram
| 2004 Ford Ranger purchased with no fog lights but would like to add factory lights, got the lights on e bay but do I need other hardware to install and where is the best place to run wire to the switch, | |
| On my 2000 Ranger with 3.0 V6 the oil pressure gauge does not register until driven about a mile- plenty of oil in crankcase-no rapping sounds. I purchased a oil pressure sending unit-but can't locate the old one-anyone have an idea where it is? Thanks. DON CHEPURNA | |
|
|
|
Replying to: ridge_runner (Dec 27, 2005 6:53 am) http://www.suspensionconnection.com/ |
|
| I am just writing to let people know about a fix I have done to my 2000 4.0L V6 Automatic Ranger. I have found out through some investigation about these engines being easily coated in carbon buildup. I do more city driving then highway so it is really bad. I have poor gas mileage about 280km/60Litres tank. I took my trunk into get an Induction Service and my Fuel Injectors commercial grade cleaned. My mileage is at about 340km/60Litres tank, and i have rid all knocking noises. I recomend cleaning the idle control solonoid, because it gets a lot of build up, which in returns makes a huge hi pitch humming noise. Just letting you guys know, just incase others are having this problem. | |
|
Replying to: helpless1 (Jul 24, 2005 10:47 pm) |
|
Today I rolled up 240,000 miles on my 96 Ranger XL, 2.3L, 5-speed. It may die tomorrow, but for now the truck seems to be going strong.  Recently, I did notice a low-pitched whining noise on cold mornings before the truck has had time to warm up. I took it to a local mechanic who is a friend of mine. He suggested that with the number of miles the transmission oil probably needed to be changed. I had him change it and so far I haven't noticed the sound anymore.
|
|
|
Replying to: rangineer (Aug 21, 2005 10:26 am) http://www.therangerstation.com/tech_library/bleedclutch.htm Thanks for the help!! |
|
| Help I need someone to tell me how to fix my 93 Ranger it doesn't fire. I checked the ignition module and it is OK I can't fine the crankshaft sensor to check it the book said it was by the crankshaft pully but i can't find it or the wires to it. If someone can help I sure would be gratful | |
The bad, clunky noise I am speaking of is very specific. It only, and almost always, happens when I am in 4 wheel drive, and switch from reverse to drive. So I back the truck up, come to a stop, put it in drive, and there is a terrible, metalic thump that seems to be coming from the front end when I start to move the truck forward. The first time it happened, I freaked out and crawled around under the front end, but everything seems to be in place. Anyone have any ideas of what this might be?
|
|
|
|
|
hi there does any one know what ball joints will fit this FORD RANGER 1998-2002 DJM CALMAX UPPER CONTROL ARMS CA3098U. Has any one lowered there truck with 255/55/18 tires i want to lower the truck 4" in front and 5" in rear what should i do get new tires or will they work. thanks montyanger98 |
|
You are here:
Forums
Pickups Ford Ranger Ford Ranger Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2008 Ford Ranger
Browse by Board
Browse by Topic
Today's Chats
