Last post on Apr 21, 2012 at 10:11 AM
You are in the Ford Focus
What is this discussion about?
Ford Focus, Hatchback, Sedan, Wagon
Mar 23, 2010 (9:35 pm)
MY LAST POST I THOUGHT THAT THE CRUISE CONTROL MAY HAVE BEEN ACTING UP-HOWEVER I GOT THE UNIT DIS ENGAGED TODAY AND TONIGHT THE VEHICLE WOULD NOT SLOW DOWN AGAIN-IS THERE A POSSIBLITY THAT THE THROTTL CABLE IS STICKING,ANY IDEAS WOULD BE APPRECIATED. 2001 FORD FOCUS-160,000 KM
#156 of 160 Re: Focus 2002 Broken Coil Spring [dvc1492s]
Mar 24, 2010 (7:37 am)
Thanks for that info. I've been having the same problem with my Focus. I called the Ford dealership and mine is under warrenty too!
Aug 19, 2010 (10:37 am)
crunching grind noise in front end when steering and continuous drumming..(sounds like fingers drumming... )steady when in drive...8x in shop..they changed struts, control arms, links, removed plastic...still to no avail...they claim to have checked bearings, cv joints...help..anyone..gonna trade the lemon in...pfttt!!
#158 of 160 Re: 2006 Focus zx4 s [april100176]
Jan 25, 2011 (6:03 pm)
I have a 2006 Ford Focus ZX4 SE that had a noise in the rear area. I thought it was in the suspension but took it to a Ford dealer here in Springfield, Illinois and found out that it was a problem with the rear arm assembly. They replaced the real arm assembly and the noise was solved. Maybe this is somthing you need to check out with your 2006 Ford Focus. Hope it helps!
#159 of 160 2005 Focus Wagon Vent Switch Issues
Aug 02, 2011 (9:18 am)
Has anyone had the vent switch on the HVAC unit stuck in one position. The switch is stuck on the upper vent setting and will move to floor or demister position. If so, what was the issue and fix? Is there a TSB for this problem? Thanks.
#160 of 160 Re: 2006 Focus zx4 s [april100176]
Apr 21, 2012 (10:11 am)
Its the bacing plate hitting the drum. i have the same noise and found out that was the problem just take a pry bar and ease it off.