You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado/GMC Sierra - Owners hangout ![]()

5688 messages, Last post on Oct 17, 2006 at 8:34 PM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
Replying to: psg (Apr 28, 2005 5:59 am) rattle/squeak from under dash, never able to fix. Drove me nuts. driver speaker went out. blower fan was starting to make noise steering shaft issue transmission hesitated a bit off dead stop front shocks at 38K- Chevy did replace them after I would not go away. Breaks have been WONDERFUL. No complaints there. passenger side of AC control display- where the blue and red are displayed, went out. Only way to fix is to replace entire control, $245 plus labor. tailgate cables, replaced them with old style, never followed up on new stainless ones. various rattles and squeaks. I don't think this 2003 was built as well as my 2001. I have had more sample defects and things that just annoy you than on the 01. I do manage, however, to put 25K or so on per year, so I tend to wear them out pretty quick. the 03 was two years old and riding like a 10 year old truck. I just traded it on April 30th for a 2005 3/4ton HD with the 6 liter V8, and I seem to be getting better mileage already. I don't understand it, but I guess this engine works less for the same buck. I have been happy overall with them, and I tow quite a bit- heavy job trailers, bobcats, cargo trailers, lumber, etc, and the foreign trucks just can't compete with tow power and stability for heavy loads. I would, however, buy the Nissan Titan in a New York Minute if they made a 8' bed.
|
|
I just bought a 2005 3/4 ton extended cab and want to put in my aftermarket radio and speakers. I have never been impressed with GM sound systems. They suck. Moving on, I had a 01 that was really easy to get into, but this one has two screw covers about waist high at both edges of the panel, and I was wondering before I got into it if there were other changes. As far as I can remember there are screws under the open pull handle/armrest and behind the trim panel wher the inside door lever is. Do you still lift up? I just don't want to break anything. Also- does anyone know where and what size of Torx socket to get for the seat nuts? They used Torx on the damn things and standard SAE on the rear seats! Why they change things. I know it is bigger than a 16 MM, and it is the FEMALE version of a Torx socket that I need. I have tried Sears, Home Depot, Lowes, and the tool liquidators in the area
|
|
|
Replying to: tiger10 (May 01, 2005 1:22 pm) |
|
| They are the same parts just depends wether you want a BIG BASS MOUTH or something SLICKER they come down the ling and same parts save grill fenders and hoods so pick your look cause they are the same. | |
| Resale is usually slightly better on Chevy then GMC. Same product, fickle market place. | |
| Sierra/Silverado? The list includes the part name, GM part number, picture, cost and time it takes to R/R the part. If anyone does, email me and I'll send it to you. Being that I have no use for it now. | |
|
oby; I sent you an e-mail on that but have no record of it in my "sent" folder, so can't verify that it was indeed sent. Will you please verify receipt. Thanks. -David
|
|
You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado/GMC Sierra - Owners hangout ![]()
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500



Browse by Board
Browse by Topic
Today's Chats