You are here: Forums Sedans Chrysler 300M Chrysler 300M

Chrysler 300M

26363 messages,  Last post on Nov 03, 2009 at 2:51 AM

You are in the Chrysler 300M Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler 300M, Sedan

Messages Page 2626 of 2637 1 ... 2623 2624 2625 2626 2627 2628 2629 ... 2637 Prev Next Last

Go To Msg # Search This Discussion

#26248 of 26363 Film behind plsatic separating gauges from interior. by devo1313 Nov 24, 2007 (6:01 pm)
When I purchased my used 300, there was a dried liquid on the back side of the plastic that separates me from the gauges in my dash...I tried unscrewing the screws directly above the gauges, but can't get plastic to pop out. Is there something I am missing or an easier way to get to this part?
#26249 of 26363 300M by blacklab1936 Nov 25, 2007 (6:39 am)
Hello, I have just recently purchased a 300M. I would like to know if the controls on the steering wheel (Cruse control, set, coast etc.) are supposed to light up at night? Also, whether the heater control knob is supposed to light up?  Thanks for any assistance! Replies to this message: rider62 (Nov 25, 2007 5:00 pm)
#26250 of 26363 Steering wheel controls by blacklab1936 Nov 25, 2007 (8:57 am)
Hello, I have just recently purchased a 2004 300M. I would like to know if the controls on the steering wheel (Cruse control, set, coast etc.) are supposed to light up at night? Also, whether the heater control (Fan) knob is supposed to light up?  Thanks for any assistance! Replies to this message: jonathan_216 (Nov 25, 2007 12:55 pm) blacklab1936 (Nov 25, 2007 2:40 pm) blacklab1936 (Nov 26, 2007 8:54 am)
#26251 of 26363 Re: Steering wheel controls [blacklab1936] by jonathan_216 Nov 25, 2007 (12:55 pm)
Replying to: blacklab1936 (Nov 25, 2007 8:57 am) The cruise control lights do not light up. The fan knob should. bulb is probably bad.
#26252 of 26363 Re: Steering wheel controls [blacklab1936] by blacklab1936 Nov 25, 2007 (2:40 pm)
Replying to: blacklab1936 (Nov 25, 2007 8:57 am) Thank you! Replies to this message: blacklab1936 (Nov 26, 2007 8:54 am)
#26253 of 26363 Re: 300M [blacklab1936] by rider62 Nov 25, 2007 (5:00 pm)
Replying to: blacklab1936 (Nov 25, 2007 6:39 am) Yes, everything that looks like it should be illuminated, should be. If you are referring to a round control knob that is usually black and assembled with the climate controls, no not the entire knob, just the background.
#26254 of 26363 Re: Steering wheel controls [blacklab1936] by blacklab1936 Nov 26, 2007 (8:54 am)
Replying to: blacklab1936 (Nov 25, 2007 2:40 pm) Thank you!!
#26255 of 26363 Re: repaired doorglass [on1wheel] by rogjack6112 Nov 29, 2007 (6:59 pm)
Replying to: on1wheel (Apr 25, 2002 7:19 am) On1Wheel --I have now had two of these brackets break as you describe. I bought a new glass the first time but am thinking of welding it like you did. JB Weld glue did not hold.  How did the welding hold for you and is is hard with a MIG wire welder? thanks Roger
#26256 of 26363 Steering issues by markflores28 Dec 24, 2007 (7:46 am)
i just purchased a 99 chrysler 300 m, car has ran great for about a week now, but unfortunatly all good things come to an end i guess.. yesterday i started noticing whenever i hit my breaks, and have to make a left or right turn, or even a u- turn of some sorts steering wheel becomes very tight and i have to use all my might and both hands to turn vehicle, it feels as if power steering goes out, However as long as im driving and not hitting breaks the steering works just fine, which makes me think its not the power steering but something to do with the breaks somehow... this trouble all started to occur yesterday after i had parked my car for a moment to run into the store, i did put on my emergency break because the parking space was at a slight tilt. when i drove away from that store the trouble began.. can anyone please help me?
#26257 of 26363 chrysler 300 m steering issues by markflores28 Dec 25, 2007 (6:56 pm)
My 99 chrysler 300m has steering issue.. the only time i can feel power steering working is when im hitting the gas on my car, if not hitting gas on the car, steering becomes very stiff and have to use two hands and alot of force to turn steering wheel, what can this be? Replies to this message: rider62 (Dec 26, 2007 10:15 am)

Messages Page 2626 of 2637 1 ... 2623 2624 2625 2626 2627 2628 2629 ... 2637 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler 300M Chrysler 300M