You are here: Forums Sedans Chrysler 300M Chrysler 300M

Chrysler 300M

26366 messages,  Last post on Dec 03, 2009 at 1:55 AM

You are in the Chrysler 300M Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler 300M, Sedan

Messages Page 1815 of 2637 1 ... 1812 1813 1814 1815 1816 1817 1818 ... 2637 Prev Next Last

Go To Msg # Search This Discussion

#18137 of 26366 tom by 300michael May 26, 2002 (5:09 pm)
From the sound of it you will be passing many of your 300M brothers Enjoy.
#18138 of 26366 Roger (aka El Presidente) by 300michael May 26, 2002 (5:10 pm)
Any news on the HID conversion kits yet. The month is practicly over and have not heard anything yet. I just reground the hood on the fog lamps to change the pattern. I wanted more side light (like the cornering lights on the older lux, cars like Caddys and Lincolns). Now I took off the Aux lights I had (I lost one set the first day after lowering) on the car. It is set so that it does not blind the oncomming traffic although the side traffic will see the light (so to speak), pun intended. I am thinking of regrinding the front lo beams hood to see if it will increase the lower light level.
#18139 of 26366 The side vinal door guards by 300michael May 26, 2002 (5:22 pm)
I am thinking of raising the side vinal door guards. Now that the car is lowered the door moldings offer even less protection. I am thinking of raising them about 5" and using double side tape to reattach them. That way they would help protect against SUV's and Trucks too.
#18140 of 26366 Some people get spring fever by 300michael May 26, 2002 (5:23 pm)
I get Mod fever, go figure. Mod, Mod, Mod.
#18141 of 26366 I'm back but still peeved! by mikeyjohn May 26, 2002 (6:44 pm)
I have given myself about 24 hrs. to cool off, and have gone through hundreds of posts and have found other comments much more (so called) offensive then what I put in, by attempting a bit of humour. I know that some of you do not know what this is about because my post was wiped off prior to some of you reading it. I will now leave it alone, and just post if I have what I consider appropriate or needing assistance. I have learned a lot in the year that I have been on this board and I thank everyone for it, and I also feel good when I can contribute something to this board. I have not joined the club as I can't see a benefit here in Canada, but if any of you other Canucks can convince me I might re-consider.Thanks for the support that some of you gave me. It feels good!!!!!!!!!
#18142 of 26366 mawg by beach15 May 26, 2002 (7:09 pm)
Jee, that sounds just like...ahh, I'll spare you all the details. 2 months ago we traded our 2000 with 18k miles on it and it was already a rattlebox. When you say behind the dash, do you mean right behind the gauges? We had a constant rattle from there that 2 dealers couldn't/wouldn't fix, but coming from Otto, I was told it was probably a loose cross car beam screw. There's a bracket on the back of the IP that's held tight against the beam by the screw. When and if it gets loose, you'll have one heck of a rattle.   I had gotten instructions on how to get into the dash and fix it, but I never really got that far into the dismantling.   Under the body? Sound like it's in the steering/suspension or is it something underneath the floorboards?   Good luck with those pesky rattles!
#18143 of 26366 300michael by mekmart12 May 26, 2002 (7:51 pm)
The vibration, slight though, occurs with 1/2 > throttle/ Again, it can be interpreted as "road feel" I will not go back to stock springs, BTW - my 300 is a non PHP.
#18144 of 26366 sdmike by mekmart12 May 26, 2002 (7:54 pm)
Thanks for the info on the chip. You should know this drive,,,I live in Temecula, work in San Diego. The run down I15 has stretchs to let the car breath...How much is the ASE chip anyway?
#18145 of 26366 mekmart12 by sdmike2 May 26, 2002 (8:17 pm)
I don't know how much the chip is, but if you post on the MODS section of the club board ( http://www.300mclub.org ) you'll likely find someone that has installed either the ASE chip or another (that I can't remember the name of). I know what you mean about the I15 run. YOu just have to do it before 6am or after 8pm.
#18146 of 26366 mikeyjohn by easyrider300m May 26, 2002 (10:27 pm)
I hope you will keep posting here---the host of the board can sometimes overreact---dont let one problem peeve you off---this is the best board on Edmunds with intelligent posters for the most part who are willing to help out fellow M'ers. You should also check out the club board for a different type of organized board ---its at http://pub88.ezboard.com/b300menthusiastsclub Easyrider300M

Messages Page 1815 of 2637 1 ... 1812 1813 1814 1815 1816 1817 1818 ... 2637 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler 300M Chrysler 300M