Last post on Sep 27, 2013 at 3:04 PM
You are in the Nissan Maxima
What is this discussion about?
Nissan Maxima, Sedan
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#4151 of 4184 1997 Nissan maxima starting problembs
Nov 21, 2011 (10:54 am)
I have an 1997 Nissan Maxima with 248000 miles on it that has just started having problems starting after the car has reached opp temp. If you shut the car off and restart after a few mins its just fine. If you leave it set over 45min to an hour it will not restart till the car has cooled all the way off.
I just replaced plugs, map sensor, knock sensor and fuel filter. there are no check engine codes at the moment. i have no idea of what could be wrong now. any one have any idea or has had simm. problems
#4152 of 4184 Re: Starting problems on 2001 max [lucy1213]
Jan 06, 2012 (6:22 am)
I have a 02' Maxima with AT with a hot engine restart problem. Did your issue ever got resolve? I'm very interested with the fix.
Jan 12, 2012 (1:25 pm)
I have 33000 miles on my Maxima and was told that my transmission needs to be replaced. I noticed a whiney sound as the car increased speed. Very noticable in the 30 to 40 MPH range. I also had both wheel bearings replaced in the last month. I love the car but I hope I'm not in for a lot of problems. Anyone else have these problems? BTW the dealer has been excellent at helping me.
#4154 of 4184 Re: 2000 Nissan Maxima SE intermitten startups [atlmike]
Jan 18, 2012 (2:38 pm)
I had the same problem and all the test were just like urs my brother in law works on cars he told me the 2000 maxima had some kind of silenoid in the starter that starts to go bad and that's why sometimes u get just cranking but still wont start it happened to me twice at a gas station after I went for gas and second time for cigarettes so I believed him change my starter and had no problem since and this was a year ago even the cranking sounds stronger since. So don't know if this helps but it definitely helped me
#4155 of 4184 re: engine noise [kdsay]
Jan 18, 2012 (4:49 pm)
Yeah sounds like your oil pump might not be sending the right amount of pressure I would change it instead of the sprockets
#4156 of 4184 Re: Slow start [djames1]
Jan 18, 2012 (5:00 pm)
I had this problem before change fuel pump same problem. changed my fuel pressure regulator and problem went away. Helped me u should check this out
#4157 of 4184 Re: Maxima engine problems [windarter]
Jan 21, 2012 (8:11 pm)
I have had the same issues. 2 engines both at 86k miles. At 175k. The same issues appeared again. Car exclusively maintained by Nissan service. First engine was good willed but the second d o a. Very disappointed. I spent thousands on maintaince and should get more than 90k from a high tech engine. Took car to a good street mechanic who discovered a bad PVC valve. Why couldn't Nissan figure this basic problem. Also had 3 catalytic converters replaced in this car. Oil caused that problem. The particles from the cat most likely got sucked into the engine. Who knows at this point. Trying to salvage the engine with stop smoke to possibly seal rings or cylinders.
#4158 of 4184 2006 Maxima: Check Engine / 02 Sensor
Apr 16, 2012 (10:32 am)
My check engine light just came on this weekend. Had it checked out at Advance Auto Parts and they said that it read "Catalyst System Efficiency Below Threshold" and that the bank 1 02 sensor needed to be replaced.
I'm trading the car in within the next 4 weeks and really don't want to lay out the cash for the repairs. Is there any way to reset the error code? Anyone have any idea what this would likely cost to repair? Any other recommedations?
#4159 of 4184 Re: 2006 Maxima: Check Engine / 02 Sensor [poodog13]
Apr 16, 2012 (10:41 am)
The O2 sensor just screws into the exhaust like a spark plug and then has a wire harness that plugs into the back side. It's a 15 minute repair. I'm not sure what the cost of the part is, just check with Advance or Autozone. I replaced mine a couple of years ago and I think they were like $70 each if I remember right.
#4160 of 4184 Re: Instrument cluster [tonygolf]
Apr 16, 2012 (1:28 pm)
did you have the problem fix? I am having the same problem I could have written it myself. The mechanic replaced the circit board and its still doing the same thing, he cant figure it out.