You are here: Forums Sedans Nissan Maxima Nissan Maxima Maintenance and Repair

Nissan Maxima Maintenance and Repair

4048 messages,  Last post on Nov 23, 2009 at 4:23 PM

You are in the Nissan Maxima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Maxima, Sedan

Messages Page 406 of 406 1 ... 400 401 402 403 404 405 406 Prev Next Last

Go To Msg # Search This Discussion

#4042 of 4048 Re: Cold Trasmission Locks up [woodstock2] by lauren15 Oct 12, 2009 (9:23 am)
Replying to: woodstock2 (Sep 28, 2009 7:38 am) My car is a 2001 <Maxima and have a similar problem; I have about 97,000 miles on my car. It does it quite randomly - typically only when I've been driving it the highway at sah 70mph or so, and then exit highway and go into far lower speeds. I'll keep watching this list but if you find out anything, please do let me know. I'd hate to replace the transmission if that's not the problem.
#4043 of 4048 96 maxima shifts hard from 1st to 2nd by 15mike Oct 27, 2009 (1:25 pm)
This is an automatic. It shifts normally the rest of the gears. Th efaster I accelerate, the harder it shifts. Any Suggestions?
#4044 of 4048 Re: OEM shocks/springs alternatives [pegasus17] by easypar Nov 11, 2009 (6:44 am)
Replying to: pegasus17 (Mar 11, 2009 5:10 am) Pegausus17 I have an 03 as well and I'm getting a noise that's not struts or anything else steering or suspension. Do you recall what exactly on the brake hardware was causing this? The guys that did the brakes on my wife's car also does steering suspension so I may just go have him put it on the lift.   Thanks in advance.   easypar Replies to this message: pegasus17 (Nov 11, 2009 12:01 pm)
#4045 of 4048 Re: OEM shocks/springs alternatives [easypar] by pegasus17 Nov 11, 2009 (12:01 pm)
Replying to: easypar (Nov 11, 2009 6:44 am) REF: 4044 On my 03 Max, it was the brake hardware (aka pad retaining clips) that was replaced. I also got new rotors (NAPA Ultra) so had that done at the same time. Noise is gone but it could have been a problem with any of those parts (pad, rotor, clip). Let me know what yours turns out to be...good luck
#4046 of 4048 OEM struts/shocks/springs alternatives by easypar Nov 11, 2009 (1:13 pm)
REF4045.   It was kind of odd, I had three potential buyers look at my car and two of them made offers but both of them commented about the "thunking and clunking" from the front end. One specifically mentioneda major street nearby that has many of the "tar filled joint repairs". Oddly enough both of them made offers but one made his low enough to more than pay for struts because he was sure it was struts.   I waited until after 10:00 PM and drove around, no radio or other distractions and even shut off the engine and coasted a bit. I'm a bit hard of hearing and the only thing that I noticed out of the ordinary (I've owned this unit since it was 4 months old) sounded more "sheet metal" than solid like a strut problem.   Someone on here or another site had mentioned that the rubber bumpers for the hood had needed to be backed out (made taller) so I tried that, and even put a cabinet door "button" on each of them. The noise that I had heard went away. I told the buyer I would have it checked out though before I countered his offer.   I went to a very reputable local brake steering and suspension (not a national chain, a local family with a long reputation in our (50,000 population) town. Told him everything and he drove it for 10-15 minutes and put it on the lift. He said he heard no noise, but then he had no experience with the former condition. He said the only thing on the struts was that one of the boots was a bit torn but he thought the mileage was a bit on the low side for that make and model. He also pointed out (as I had) that the stiffer suspension and lower profile tires on this would feel much different to someone more used to a more spongy sedan.   Thanks for your help on this. I'll see if this guy really wants it
#4047 of 4048 Re: Some prob of my 1995 maxima [niurou] by aarch Nov 13, 2009 (5:42 pm)
Replying to: niurou (Oct 13, 2006 5:31 pm) Belive it or not I took my Max in today to get a starter installed,grone noise when you strt car mostly in cold,anyway these are the same code my mechanic came up with,po115 and 0325 knock sensor and the coolant sensor,the light came on after I added fuel injector cleaner...hmmm,codes were erased and we will wait and see ,mech said no big issue as longas 24 mg is happening,this little car has guts.I also am intrested to see if this also could be the mass flow sensor or the injector cleaner burns hotter than normal thus alarming the cpu.
#4048 of 4048 Re: '91 maxima speedometer issue [morides4chefs] by bozo8 Nov 23, 2009 (4:23 pm)
Replying to: morides4chefs (Jan 17, 2007 6:12 am) my 1996 maxima speedometer works on and off

Messages Page 406 of 406 1 ... 400 401 402 403 404 405 406 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Nissan Maxima Nissan Maxima Maintenance and Repair