Sign In Join 



Nissan Maxima Maintenance and Repair

4048 messages,  Last post on Nov 23, 2009 at 4:23 PM

You are in the Nissan Maxima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Maxima, Sedan


Messages Page 400 of 405
1
...
397
398
399
400
401
402
403
...
405
Prev
Next
Last
Go To Msg #
Search This Discussion

#3990 of 4048
Re: Maxima repair costs [lhy] by caugn
Apr 20, 2009 (2:22 am)
Reply

Replying to: lhy (Apr 19, 2009 2:47 pm)

I have a 1997 maxima with 197k miles. I haven't found the repair costs to be anything extraordinary. I had the alternator replaced a few years ago which cost around $150 for parts and labor, and a new battery was $60. And I spent around $200 on a new exhaust system which I installed myself. Other than that I haven't had to repair/replace any other parts.
#3991 of 4048
Regarding Maxima Repairs and costs. by meister4U
Apr 20, 2009 (12:55 pm)
Reply
As a mechanic and the owner of a 1995 Maxima with 136000 mls. on it, the costs have been only for the stadard maintainance and your replacement cost for wear and tear...brakes, filters, etc. Did have the CV joint go after about 90000, and had to have it replaced and did along with the struts. That was a decision that made the ride better. Other wise, the car has never had a major problem. The motor runs like new still and if you keep up with the basics, like oil and filters, and brake pads, it should go forever Just be sure you have a reputable mechanic, check out any used car you are going to buy, if you do not know enough to do it yourself....buyer beware. A well taken care of Maxima is good as gold. This is my 4th Nissan...2nd Maxima. I will buy another when the timecomes.
#3992 of 4048
Re: Engine Stalling Problem [rahman] by missk1
Apr 23, 2009 (5:34 pm)
Reply

Replying to: rahman (Apr 18, 2005 10:10 am)

Hello I have a the same prob with my car did you ever find out the prob?
#3993 of 4048
Re: Regarding Maxima Repairs and costs. [meister4U] by lhy
Apr 23, 2009 (8:52 pm)
Reply

Replying to: meister4U (Apr 20, 2009 12:55 pm)

I have heard that the aftermarket parts for the Maxima are limited, and that is why repairs might cost more, since you have to buy parts from Nissan. It that true?
 
Also, does the 1995 Maxima take regular unleaded fuel or only premium?
 
And the 1995 Maximas all have timing chains, not belts?
#3994 of 4048
Timing chain noise by easypar
Apr 28, 2009 (5:32 am)
Reply
I've only had this happen once, although my wife said it happened to her once too. With the car parked facing uphill a bit, and having sat for awhile I got a loud "rattle" from the engine compartment on start-up. It went away in about 1-2 seconds though.
 
I know my 03 Maxima has a timing chain and I'm wondering if it could be a problem with the (I'm assuming oil pressurized) timing chain tensioner.
 
The car has 73,000 miles, regular oil/filter changes at 5,000 mile intervals. I checked the oil when it happened and it was full.
 
Thanks in advance.
#3995 of 4048
Re: Regarding Maxima Repairs and costs. [lhy] by Mr_Shiftright HOST
Apr 28, 2009 (6:36 am)
Reply

Replying to: lhy (Apr 23, 2009 8:52 pm)

timing chain on a '95 Maxima.
 
You should be able to get most mechanical parts for a '95 but trim pieces and body panels and lens and upholstery bits---yeah, that's probably not so easy anymore. A dealer that is not too lazy is generally your only source for cosmetic and trim bits---or a local Pick A Part. But "expendable" parts, like brake pads, ignition parts, tires, belts, etc. should be readily available at chain stores, NAPA, places like that.
#3996 of 4048
Re: Timing chain noise [easypar] by sanjaysdca
Apr 28, 2009 (7:03 am)
Reply

Replying to: easypar (Apr 28, 2009 5:32 am)

There is a possibility that your ignition coils are going to go shortly.
 
My 00 Infiniti I30 exhibited timing chain noises at 75000 miles. They started out slowly. Then the noise was almost always there while accelerating and while climbing hills. Car also felt "less powerful".
 
At 80K check engine light and TCS light came on and occasionally car viberated at startup. OBD code gave DTC code 1320 .
 
Bought 6 OEM ignition coils and 6 OEM spark plugs online for $550. Its very simple one hour job and does not require much mechanical skills. (atleast in 2000 MY).
 
This is a well documented problem in maximas and I30. Also check out Maxima.org for details of the procedure.
#3997 of 4048
Engine clatter by easypar
Apr 29, 2009 (2:11 pm)
Reply
Thanks sanjay. I never considered it to be the igniters/coils. I always thought they were an ON/OFF proposition and that if one went out to just replace that one. It hasn't turned on the CEL and I never take it on road trips any more, so I'll just keep my ears and eyes open.
 
easypar
#3998 of 4048
Re: Timing chain noise [easypar] by maxima03
Apr 29, 2009 (6:25 pm)
Reply

Replying to: easypar (Apr 28, 2009 5:32 am)

Wow, this sounds a lot like my car. I hear that clattering sound once in while at startup, and at acceleration. There's an exit ramp near my house that curves steeply upward (almost in a circle) onto the local road. I take that exit every day coming back from work, and I always hear the clatter when I'm approaching the top of the exit. I guess engine strains help reproduce the sound.
 
The strange thing is I almost never hear it if the oil is relatively new. It seems to occur more often as the engine oil ages. At the last maintenance I told the dealer about it, but they couldn't find anything.
 
Any other suggestions??? Oh, I have almost 75000 miles on the car.
#3999 of 4048
Re: Engine clatter [easypar] by sanjaysdca
Apr 30, 2009 (6:59 am)
Reply

Replying to: easypar (Apr 29, 2009 2:11 pm)

you are welcome...
 
Its a great car...
The car is also very sensitive to the gas you put it. Mine does well with Chevron and Shell...and extremely bad with ARCO...have no explanation. Its just an observation.
 
I believe the coils have design flaw. There was a TSB issued while back...but my car was way outside warranty. The stealer (I mean dealer) wanted 1200 for it...so I did it myself. 500 for parts + 1.5 hour of my time
 
If you know how to open bolts and unplug power cords you can do it too in an hour flat.

Messages Page 400 of 405
1
...
397
398
399
400
401
402
403
...
405
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement