Sign In Join 



Nissan Maxima Maintenance and Repair

4043 messages,  Last post on Oct 27, 2009 at 1:25 PM

You are in the Nissan Maxima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Maxima, Sedan


Messages Page 393 of 405
1
...
390
391
392
393
394
395
396
...
405
Prev
Next
Last
Go To Msg #
Search This Discussion

#3920 of 4043
Re: 99 maxima stalling [99max2] by rexkay
Oct 08, 2008 (6:37 pm)
Reply

Replying to: 99max2 (Oct 08, 2008 12:02 pm)

On my 96 the map sensor was heat sensitive and gave me problems as the day got hotter. After coils, plugs, and maf , I wrapped the map sensor with a rag and duck taped it. Ran great when kept cool so I replaced it and problem was solved. If it is running really bad pull a couple plugs and if they are fouled I bet it is the map sensor.
#3921 of 4043
Cold weather steering difficulty by haroldsjs
Nov 22, 2008 (11:59 am)
Reply
November 22 was the first full very cold day, in the Northeastern NJ area (suburb of NYC). I found that when I started my 2001 Maxima GLE, the steering seemed to be locked. I could turn the wheel, but it was as if the car was in neutral with the engine off.
 
This is happening while the car is stopped in drive or when it is in park. When I depress the accelerator while in drive to move the car, the steering returns to almost normal function (still has a bit of sluggishness). After letting the car warm for a while the steering almost returns to normal, with the exception that when turning the wheel to the furthest extreme of the turning radius, I feel the wheel giving jerking resistance to the car being turned.
 
I checked the power steering fluid level, and it is between the cold maximum and cold minimum levels. Is this the power steering pump? Could there be moisture in the power steering fluid, which has frozen?? Or could air in the power steering fluid lines cause this? What is casing this problem?
#3922 of 4043
Nissan Maxima by vw2dracer
Dec 09, 2008 (8:15 am)
Reply
I have a 2.5 inch header and a 21/4 short pipe with glass pack on this car. I has a bad miss. It only does it on startup. It stops as you drive it. But at low rpm it does it. Driving down the road, in overdrive it does it. I thought that the short pipe would cause this, being that the o2 is not holding heat. I'm lost and would love some advice. Like I said it comes and goes.
#3923 of 4043
Re: Nissan Maxima [vw2dracer] by obyone
Dec 09, 2008 (2:18 pm)
Reply

Replying to: vw2dracer (Dec 09, 2008 8:15 am)

Are you running double gaskets where the header meets the exhaust? Depending on the manufacturer of the headers there might be a small gap that a second gasket would eliminate.
#3924 of 4043
nissan maxima by vw2dracer
Dec 09, 2008 (6:07 pm)
Reply
I'm not running double gaskets, but the hearder connection is a O gasket. The only other ones is the head to header gasket. The manu. is pace setr. I didn't do the work. My best friend did, and it is WELL done. I put plugs and wires on it today. Runs SO much better. I had some info that was not told to me...
#3925 of 4043
whats up guys? any help? dealer trying to screw me! by Sobr609
Dec 11, 2008 (1:51 am)
Reply
i have a 2000 maxima gle, 99k had the car since it was brand new. past 6 months it has been having problems starting. i recently burnt out my starter, once started runs great! so i just replaced starter and in past year replaced alll ignition coils, battery, alternator, plugs, tensioner, etc.. anyway the dealership told me it was becasue of corrosion in between the motor and tranny..lol yeh right, he said becasue i use to live in new jersey that the salt from the snow corroded it up. never heard of that ever! they want to charge 3,400$ to clean it out! im not dumb, whenever it try's to start you have to give it gas and more gas. if i turn the key on and off like 5 times and start it up it starts perfect! please help?
#3926 of 4043
Spark Plugs for a 2001 Maxima by haroldsjs
Dec 18, 2008 (4:43 pm)
Reply
I am looking into doing my first tune up in many years. My car is a 2001 Nissan Maxima. I am told that there are many different types of plugs for this car. They range in cost from $3.99/each to more than $11.99/each. They go by names that include; Iridium, Platinum and the like. I was told by a sales person that the fancy more costly ones have a hotter spark.
  
My knowledge of how plugs and combustion work is; that the plug fires at the maximum fuel/air compression level to get the most power from the combustion.
  
Does the heat of the spark make a difference? Isn't it true, that once the minimum flash point of the spark necessary is achieved for detonation to takes place, any heat (energy) over and above that flash point, necessary to cause detonation of the fuel/air mixture is superfluous?
  
If my understanding is true, then spending more money on expensive plugs, is waistful. Please tell me what the real deal is.
#3927 of 4043
Re: whats up guys? any help? dealer trying to screw me! [Sobr609] by guu
Dec 18, 2008 (5:12 pm)
Reply

Replying to: Sobr609 (Dec 11, 2008 1:51 am)

wash both ends of your battery cables with baking soda paste, or classic coke
#3928 of 4043
Re: Spark Plugs for a 2001 Maxima [haroldsjs] by guu
Dec 18, 2008 (5:13 pm)
Reply

Replying to: haroldsjs (Dec 18, 2008 4:43 pm)

cheaper plugs will tend to not spark more often
#3929 of 4043
Max unable to sustain accerlation sometimes by lauren15
Dec 21, 2008 (11:40 am)
Reply
My '01 has about 80,000 miles. Recently I have had a problem with my car not accerlating when I step on the gas. It starts fine, runs well, and then it will sound like it is staying in a low gear and not shifting up. The tachyometer revs up to 4 or 5 but the speedometer stays only about 20 mph no matter whether I step on the gas or not. After pulling the car over "to rest" it has started up and ran fine after about 20 to 30 minutes. This has happened three times in the past month or so. The engine just seems unable to develop and/or sustain power.
 
My local mechanic put it on a diagonstic and said it was not transmission related. I am reluctant to take it to the dealer because the car ran fine for my mechanic when I brought it to him.
 
Any thoughts much appreciated!

Messages Page 393 of 405
1
...
390
391
392
393
394
395
396
...
405
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement