You are here: Forums Sedans Nissan Maxima Nissan Maxima Maintenance and Repair

Nissan Maxima Maintenance and Repair

4048 messages,  Last post on Nov 23, 2009 at 4:23 PM

You are in the Nissan Maxima Forum. Your Hosts are pat & karens

What is this discussion about? Nissan Maxima, Sedan

Messages Page 383 of 405 1 ... 380 381 382 383 384 385 386 ... 405 Prev Next Last

Go To Msg # Search This Discussion

#3820 of 4048 Re: 1999 Nissan Maxima O2 sensor and EGR valve [og4life] by Mr_Shiftright HOST Mar 08, 2008 (9:16 am)
Replying to: og4life (Mar 07, 2008 8:21 pm) The EGR valve can be tested with a simple vacuum tool; the 02 is harder to diagnose, but a good mechanic can do it with a sophisticated voltmeter (not a cheapie) and with the car running. He can also put a machine on to sniff the tailpipe to see if you are running richer than normal and therefore possibly damaging the catalytic. Replies to this message: og4life (Mar 08, 2008 10:42 am)
#3821 of 4048 Re: 1999 Nissan Maxima O2 sensor and EGR valve [Mr_Shiftright] by og4life Mar 08, 2008 (10:42 am)
Replying to: Mr_Shiftright (Mar 08, 2008 9:16 am) Thanks for all your help. I really appreciate it. I went to AutoZone today and now the only code is the EGR valve. I guess the O2 sensor got better - lol.
#3822 of 4048 2000 Nissan Maxima ignition coils and plugs by toytruck2 Mar 14, 2008 (1:44 pm)
My car needs coils and spark plugs at 90000 miles. Where can I buy genuine Nissan parts online and get the ones with the new part number at a low price?
#3823 of 4048 Car Pulls to the Right by og4life Mar 15, 2008 (2:07 pm)
I have a 99 maxima SE and my car has been pulling to the right for some time. I just got a realignment (3rd one in less than two years) and the problem is not solved. Does anyone have any advice? I just bought new tires and the air pressure is right. Would bad struts cause the car to pull? My mechanic said they should be replaced soon.
#3824 of 4048 Rear Brake ERT by fg54 Mar 15, 2008 (4:25 pm)
Would anyone know what the ERT is to replace rear brake pads and rotors for a Maxima? Replies to this message: alexstore (Mar 16, 2008 3:35 am) fg54 (Mar 16, 2008 7:40 am) Mr_Shiftright (Mar 19, 2008 8:34 am)
#3825 of 4048 Re: Rear Brake ERT [fg54] by alexstore Mar 16, 2008 (3:35 am)
Replying to: fg54 (Mar 15, 2008 4:25 pm) they should last you 40k+. Though it all depends on type of driving you have and the environment. Replies to this message: fg54 (Mar 16, 2008 7:40 am)
#3826 of 4048 Re: Rear Brake ERT [alexstore] by fg54 Mar 16, 2008 (7:40 am)
Replying to: alexstore (Mar 16, 2008 3:35 am) Thank you for your response but, I am looking for the Estimated Repair Time (ERT).
#3827 of 4048 03 Maxima idle increase after changing plugs by tb4me Mar 16, 2008 (8:06 am)
Hi all. I just changed my spark plugs(112000 miles) and the idle increased to about 1000 rpm in park and 850 rpm in gear. I used the ngk original replacement plugs and yes had to remove the upper intake to get to the back ones. Used a new gasket when putting back together too, cleaned the throttle plates and runners with gumout while it was off. The engine seems to run fine however in addition to the idle increase, the check engine light came on a few days later but continues to run good.. I checked for vacume leaks and there are none. Any suggestions before the trip to the dealer? Replies to this message: obyone (Mar 16, 2008 10:41 am) tb4me (Mar 18, 2008 8:32 am)
#3828 of 4048 Re: 03 Maxima idle increase after changing plugs [tb4me] by obyone Mar 16, 2008 (10:41 am)
Replying to: tb4me (Mar 16, 2008 8:06 am) Check engine light is always associated with emissions. I would go to a auto parts store and have them pull the codes associated with the light rather than try and guess what the problem is. Replies to this message: tb4me (Mar 18, 2008 8:32 am)
#3829 of 4048 FAULTY WIRING ON SPEED SENSOR by dgm1974 Mar 17, 2008 (1:03 am)
ON MY 1991 NISSAN MAXIMA, I FOUND OUT THAT THE PROBLEM WHY MY SPEEDOMETER & ODOMETER ARE NOT WORKING ,IS THERE IS A FAULTY WIRING OR DISCONNECTED WIRE TO THE SPEED SENSOR. WHAT I DID WAS CONNECTED & SOLDERED THE WIRE. NOW IT IS WORKING. THANKS FOR THE ADVICES..

Messages Page 383 of 405 1 ... 380 381 382 383 384 385 386 ... 405 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Nissan Maxima Nissan Maxima Maintenance and Repair