Sign In Join 



Toyota Tacoma: Problems & Solutions - READ ONLY

2067 messages,  Last post on Nov 26, 2006 at 9:37 PM

You are in the Toyota Tacoma Forum. Your Host is kcram

What is this discussion about? Toyota Tacoma, Truck


Messages Page 207 of 208
1
...
202
203
204
205
206
207
208
Prev
Next
Last
Go To Msg #
Search This Discussion

#2053 of 2067
Re: Heat shield on catalytic converter [mikefm58] by mikefm58
Sep 20, 2006 (6:02 pm)

Replying to: mikefm58 (Sep 12, 2006 10:45 am)

" I've got an 04 Tacoma with 25K miles and the heat shield started rattling. Dealer says the weld is coming apart and that it's all part of the catalytic converter, but is covered on warranty. So much for Toyota quality. "
 
I took the truck in yesterday to have the catalytic converter put on and the problem turned out to be a simple clamp on the exhaust. My dealer is an idiot.
#2054 of 2067
Re: Starting probem when hot [seaweedsteve] by mammyrat
Oct 04, 2006 (7:34 pm)

Replying to: seaweedsteve (Aug 27, 2005 6:00 pm)

I had the same problem with my 96 2.4 tacoma. It was worse in the summer, started and ran fine in the winter, no codes. I unplugged the air intake temperature sensor (sensor in the side of the air filter) and no more problems. I went to get a new one but toyota wants $70.00. I told them to keep it. It pulls a code now but runs great.
#2055 of 2067
05 -06 tacoma dip sticks by
Oct 12, 2006 (2:34 pm)
Is it me or is the V-6 tacoma dip sticks hard to read. I check the oil on a regular bassis and have a hard time getting an accurate oil reading. I even thought the dealer over filled my oil, took it back, they showed the level as being right on. Went home checked it again. Looked to full or couldnt read it???
#2056 of 2067
Clunk feeling after stopping. by bgrove
Oct 12, 2006 (2:50 pm)
I had requested some help earlier about this unusual feeling after stopping in my 2003 Double Cab Tacoma. My truck felt like it hopped after releasing the brake at an intersection light. I finally had to take it in to the dealer for a recall and I mentioned this to them so that they could check it. What I found out is that there's a grease zert on the very back of the drive line past the tranny. I had it filled with grease and it cured the problem for about a month. I'm now starting to feel it again, and I'll have to get under there and re-fill it. Other posters have mentioned this before and this is just to reinforce this issue.
#2057 of 2067
Re: 05 -06 tacoma dip sticks [] by tokyojoe
Oct 24, 2006 (7:38 pm)

Replying to: unknown (Oct 12, 2006 2:34 pm)

Mine is '06 Taco with 2.7 engine but I have the same problem in reading oil level on the stick. A streak of oil always exists at one side of the stick well above the right amount range when I pull out the stick. When I put the right amount of oil according to the manual, the dipstick looks like overfilled. By the way, did you know that my smaller 2.7 engine takes more oil(6.1qt) than your V6(4.8qt)?
I originally thought that was a typo but it was not. When I poured 4.8qt of oil the dip stick end was barely touching the oil. Although it's still hard to read the level on the stick, 5.5-5.7qts of oil seems to be the right amount for my truck.
#2058 of 2067
Re: New Tacoma Auto Trans--'dumb shifting?' [woof] by cpl1171
Oct 26, 2006 (11:01 pm)

Replying to: woof (Aug 14, 2006 4:48 am)

I own an 06 4x4 dc lb taco with auto transmission and have noticed the same issues you have discussed here. It seem like it doesn't know what gear to use because it keeps on shifting gears when your driving. Before I bought this truck I test drove a prerunner and did not feel anything like it. I wonder if toyota has a fix for this.
#2059 of 2067
Re: 05 -06 tacoma dip sticks [tokyojoe] by marcusx
Oct 27, 2006 (5:01 pm)

Replying to: tokyojoe (Oct 24, 2006 7:38 pm)

"By the way, did you know that my smaller 2.7 engine takes more oil(6.1qt) than your V6(4.8qt)?"
 
Does anyone know why that is? Shouldn't the V6 take more oil...
 
-M
http://www.TacomaWorld.com
#2060 of 2067
Re: Clunk feeling after stopping. [bgrove] by helitaco
Oct 28, 2006 (7:57 pm)

Replying to: bgrove (Oct 12, 2006 2:50 pm)

hey there
check my comment # 2003 here.
It's a slip joint causing the problem, easy fix, just keep greasing
#2061 of 2067
Re: Vehicle Jerking Problems [stunt] by cmerrill5
Nov 10, 2006 (6:43 pm)

Replying to: stunt (Nov 01, 2005 10:28 am)

My '97 Tacoma (only 56k) has been having the same jerking problems that you have described. I bought the truck in June, and has been fine until this happened. The jerking coincided with the check engine light coming on, and when i got the diagnostic, the code indicated to replace the facuum switching valve. They cleaned the EGR valve vacuum systm and replaced one of the valves. The next day out of the shop, the check engine light came back on and the jerking continues, so they seem to possibly be unrelated. Any ideas? stunt have you gotten any helpful hints on your jerking issue?
#2062 of 2067
Re: New Tacoma Auto Trans--'dumb shifting?' [cpl1171] by nifty56
Nov 11, 2006 (7:46 am)

Replying to: cpl1171 (Oct 26, 2006 11:01 pm)

The new 2007 Camry 6 speed automatic seems to have a shifting problem. Too many gears, always hunting. Check out the "Camry wooes" here at Edmunds

Messages Page 207 of 208
1
...
202
203
204
205
206
207
208
Prev
Next
Last
Go To Msg #
Search This Discussion

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement