Sign In Join 



Toyota Tacoma: Problems & Solutions - READ ONLY

2067 messages,  Last post on Nov 26, 2006 at 9:37 PM

You are in the Toyota Tacoma Forum. Your Host is kcram

What is this discussion about? Toyota Tacoma, Truck


Messages Page 206 of 208
1
...
202
203
204
205
206
207
208
Prev
Next
Last
Go To Msg #
Search This Discussion

#2045 of 2067
Re: 06 tacoma stereo removal? [rockla] by vramirez
Sep 01, 2006 (5:46 pm)

Replying to: rockla (Aug 31, 2006 3:24 pm)

I tried that and I didnt se any screws. This website wont let me give out my e-mail. Can you explain it all in detail. Thanks
#2046 of 2067
Re: 06 tacoma stereo removal? [vramirez] by geogecko
Sep 02, 2006 (4:56 am)

Replying to: vramirez (Sep 01, 2006 5:46 pm)

All you need...
 
http://aaronlinsdau.com/gear/articles/ipod2car.html
#2047 of 2067
Brake Solenoid by jimmyg4
Sep 12, 2006 (2:56 am)
I have a '01 tacoma. The brake solenoid went out that allows you to push the shift button on the shifter, I now have to use the small manual release button next to the shifter to shift gears (of course I found this out the hard way, at the worst time, while trying to pull my boat out of the water on the launch ramp!).
 
Question - My brake lights do not work now. Is the problem related? All fuses are fine, parking lights work, running lights, back up lights, all are fine, just no lights when I hit the brakes. I can live with the manual shifting, but can I get my brake lights back??
 
Thanks!
 
jimmyg4
#2048 of 2067
Heat shield on catalytic converter by mikefm58
Sep 12, 2006 (10:45 am)
I've got an 04 Tacoma with 25K miles and the heat shield started rattling. Dealer says the weld is coming apart and that it's all part of the catalytic converter, but is covered on warranty. So much for Toyota quality.
#2049 of 2067
Re: Brake Solenoid [jimmyg4] by tacoman05
Sep 12, 2006 (2:56 pm)

Replying to: jimmyg4 (Sep 12, 2006 2:56 am)

It's probably the switch for the brake lights themselves, should be under the dash near the pedal. The shifter is wired in such a way that if it doesn't sense the brake lights on, it won't allow you to shift out of park.
 
I haven't had this problem on my Taco, but I had a Ford a few years back with the same problem and that's what it ended up being.
#2050 of 2067
PLEASE HELP IF YOU CAN!!!!!! BREAK PROBLEM ON A 92 TACOMA by marc20
Sep 13, 2006 (12:46 pm)
I bought this 92 toyota tacoma its been in the garage for a month to get the front breaks to bleed... the mechanic replaced all the break lines... put in a re-built master cylinder(if had 2 of them now) and replaced the valve pump...weve tried everything and still no luck.. if you have any Suggestions or experienced this problem as well and know what the problem is PLEASE let me know!!!!!
THANKS
#2051 of 2067
Re: PLEASE HELP IF YOU CAN!!!!!! BREAK PROBLEM ON A 92 TACOMA [marc20] by ustazzaf
Sep 16, 2006 (8:49 pm)

Replying to: marc20 (Sep 13, 2006 12:46 pm)

My advice is to get a new mechanic. Getting brakes to bleed is not rocket science. There are a few things that can cause squishy pedal if that is the problem, but a week is even excessive.
#2052 of 2067
Re: 2006 Tacoma shakes [mfrancko] by camp26
Sep 19, 2006 (8:44 pm)

Replying to: mfrancko (Aug 28, 2006 7:33 pm)

I have a 2006 tacoma access cab 4X4 TRD and mine does the same thing. They too tried the drive line switch but it didn't do a lick. Their solution: LEARN TO LIVE WITH IT....
Let me know if you find a better solution.
#2053 of 2067
Re: Heat shield on catalytic converter [mikefm58] by mikefm58
Sep 20, 2006 (6:02 pm)

Replying to: mikefm58 (Sep 12, 2006 10:45 am)

" I've got an 04 Tacoma with 25K miles and the heat shield started rattling. Dealer says the weld is coming apart and that it's all part of the catalytic converter, but is covered on warranty. So much for Toyota quality. "
 
I took the truck in yesterday to have the catalytic converter put on and the problem turned out to be a simple clamp on the exhaust. My dealer is an idiot.
#2054 of 2067
Re: Starting probem when hot [seaweedsteve] by mammyrat
Oct 04, 2006 (7:34 pm)

Replying to: seaweedsteve (Aug 27, 2005 6:00 pm)

I had the same problem with my 96 2.4 tacoma. It was worse in the summer, started and ran fine in the winter, no codes. I unplugged the air intake temperature sensor (sensor in the side of the air filter) and no more problems. I went to get a new one but toyota wants $70.00. I told them to keep it. It pulls a code now but runs great.

Messages Page 206 of 208
1
...
202
203
204
205
206
207
208
Prev
Next
Last
Go To Msg #
Search This Discussion

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement