You are here:
Forums
Pickups
Toyota Tacoma
Toyota Tacoma: Problems & Solutions ![]()

2067 messages, Last post on Nov 26, 2006 at 9:37 PM
You are in the Toyota Tacoma Forum. Your Host is kcram
|
Replying to: vramirez (Aug 29, 2006 8:07 pm)
|
|
We are doing some reorganization of topics here, in an effort to make things a little more focused and easier to follow. For those of you who regularly read this discussion, we invite you to check out the new focused discussions here at the Toyota Tacoma Group. We would like you to use these discussions first, based on your particular question or comment, and use this only if you genuinely can't find something appropriate - or just drop me an email if you think a new discussion is needed. Thanks! kcram - Pickups Host |
|
|
Replying to: rockla (Aug 31, 2006 3:24 pm)
|
|
|
Replying to: vramirez (Sep 01, 2006 5:46 pm) http://aaronlinsdau.com/gear/articles/ipod2car.html |
|
|
I have a '01 tacoma. The brake solenoid went out that allows you to push the shift button on the shifter, I now have to use the small manual release button next to the shifter to shift gears (of course I found this out the hard way, at the worst time, while trying to pull my boat out of the water on the launch ramp!). Question - My brake lights do not work now. Is the problem related? All fuses are fine, parking lights work, running lights, back up lights, all are fine, just no lights when I hit the brakes. I can live with the manual shifting, but can I get my brake lights back?? Thanks! jimmyg4
|
|
I've got an 04 Tacoma with 25K miles and the heat shield started rattling. Dealer says the weld is coming apart and that it's all part of the catalytic converter, but is covered on warranty. So much for Toyota quality.
|
|
|
Replying to: jimmyg4 (Sep 12, 2006 2:56 am) I haven't had this problem on my Taco, but I had a Ford a few years back with the same problem and that's what it ended up being. |
|
|
I bought this 92 toyota tacoma its been in the garage for a month to get the front breaks to bleed... the mechanic replaced all the break lines... put in a re-built master cylinder(if had 2 of them now) and replaced the valve pump...weve tried everything and still no luck.. if you have any Suggestions or experienced this problem as well and know what the problem is PLEASE let me know!!!!! THANKS
|
|
|
Replying to: marc20 (Sep 13, 2006 12:46 pm) |
|
|
Replying to: mfrancko (Aug 28, 2006 7:33 pm) Let me know if you find a better solution. |
|
You are here:
Forums
Pickups
Toyota Tacoma
Toyota Tacoma: Problems & Solutions ![]()
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Toyota Tacoma



Browse by Board
Browse by Topic