Toyota Tacoma: Problems & Solutions - READ ONLY

2067 messages,  Last post on Nov 26, 2006 at 10:37 PM

You are in the Toyota Tacoma Forum.

What is this discussion about? Toyota Tacoma, Truck

#2038 of 2067 2006 Tacoma shakes by mfrancko

Aug 28, 2006 (8:33 pm)

I have a 2006 Tacoma 4.0 AUTO TRD Off Road 4door short bed. When I leave a stop the vehicle shakes or shudders. This happens from about 3 to 10 mph. The factory suggested replacing the drive line but that did not work. Has anyone cured this or had the problem? Thanks mfrancko

#2039 of 2067 Re: Ice cold a/c water spilling on floorboards. . . [seraniko] by farmer3

Aug 28, 2006 (9:42 pm)

Replying to: seraniko (Aug 24, 2006 10:02 pm)
Thanks Farmer3. Used a coat hanger the first couple of times. Stick it in the drain hole from the engine and the water just pours out (I could feel something a little weird w/ the coat hanger like something was opening up? Thought that did it, but several days later it filled up again, and again. This time I took the rubber drain thing off --geez that thing is rather big --how could it get clogged??? I could find nothing. Removing the plastic pan that originally hold the water before it goes through the rubber tube, looked very complicated to remove and more than I wanted to get involved in (aka --eff it up!). Could it have been some air bubble, or something. I stuck the hanger in the plastic part (w/ a hook) but of course I could feel nothing or remove nothing. This is weird. We'll see...?
 
T

#2040 of 2067 Re: CAR STEREO [vallado1072] by vramirez

Aug 29, 2006 (8:51 pm)

Replying to: vallado1072 (Jul 13, 2006 8:56 pm)
On my 06 I couldn't find any screws.Do you know how to remove an 06?

#2041 of 2067 06 tacoma stereo removal? by vramirez

Aug 29, 2006 (9:07 pm)

Can someone tell me step by step how to remove my stereo to my 06 tacoma?

#2042 of 2067 what else can go wrong? PLEASE ADVISE by 5swords

Aug 29, 2006 (11:00 pm)

So here it is, please help in you can. I have this 03 Tacoma and this past week it was taking a couple of cranks more that usual to fire up. one day it just died out like the battery wasn't strong enough so i tried to change the battery and the other battery didn't fit so i put the old one back in and just charged it up. During that time I blew the 120 amp fuse in the process and got that changed and now it starts up BUT now it has no power the gas pedal does little to the RPM's and shifts harder than normal. Is there something like a fuse or relay that is doing this? Oh yea the check engine light is now on too.

#2043 of 2067 Re: 06 tacoma stereo removal? [vramirez] by rockla

Aug 31, 2006 (4:24 pm)

Replying to: vramirez (Aug 29, 2006 9:07 pm)
hi, you got to pry out the tempurture controle unit bellow the radio , the srews for the radio are at the back of this unit. sent me your email and i can send you detailed pictures of it. or I can post them here but dont know how to attache them.">link title

#2044 of 2067 May I have your... by kcram HOST

Aug 31, 2006 (7:06 pm)


 
We are doing some reorganization of topics here, in an effort to make things a little more focused and easier to follow. For those of you who regularly read this discussion, we invite you to check out the new focused discussions here at the Toyota Tacoma Group. We would like you to use these discussions first, based on your particular question or comment, and use this only if you genuinely can't find something appropriate - or just drop me an email if you think a new discussion is needed.
 
Thanks!
kcram - Pickups Host

#2045 of 2067 Re: 06 tacoma stereo removal? [rockla] by vramirez

Sep 01, 2006 (6:46 pm)

Replying to: rockla (Aug 31, 2006 4:24 pm)
I tried that and I didnt se any screws. This website wont let me give out my e-mail. Can you explain it all in detail. Thanks

#2046 of 2067 Re: 06 tacoma stereo removal? [vramirez] by geogecko

Sep 02, 2006 (5:56 am)

Replying to: vramirez (Sep 01, 2006 6:46 pm)
All you need...
 
http://aaronlinsdau.com/gear/articles/ipod2car.html

#2047 of 2067 Brake Solenoid by jimmyg4

Sep 12, 2006 (3:56 am)

I have a '01 tacoma. The brake solenoid went out that allows you to push the shift button on the shifter, I now have to use the small manual release button next to the shifter to shift gears (of course I found this out the hard way, at the worst time, while trying to pull my boat out of the water on the launch ramp!).
 
Question - My brake lights do not work now. Is the problem related? All fuses are fine, parking lights work, running lights, back up lights, all are fine, just no lights when I hit the brakes. I can live with the manual shifting, but can I get my brake lights back??
 
Thanks!
 
jimmyg4

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement