Last post on Nov 22, 2013 at 8:34 AM
You are in the Nissan Maxima
What is this discussion about?
Nissan Maxima, Sedan
#8978 of 8984 2001 Nissan Maxima GLE power windows
Jul 23, 2010 (7:42 pm)
Today I started my car and rolled down the power windows to let the heat out from inside the car. The driver door power window went down ( and back up) without a problem. The front passenger side power window went down only half way. The rear power windows (both sides) did not go down at all.
I tried from the driver door, and from the each individual door. Nothing seems to function. I checked the fusible link compartment under the hood. I found the bank of fusible links and fuses that say "pwr window" in the layout diagram. It is a 40A fusible link, but the copper link appears to be intact.
Now I am left with the front passenger power window stuck in the half-way open position. What must I check to diagnose this problem?
#8979 of 8984 Re: 2001 Nissan Maxima GLE power windows [haroldsjs]
Jul 24, 2010 (10:25 am)
What must I check to diagnose this problem?
The location of your nearest Nissan dealer...
#8980 of 8984 Re: 92 Maxima acceleration problem [logitech1]
Dec 24, 2010 (9:18 am)
did you get your maxima fixed? I having the same problem
#8981 of 8984 Re: Power windows for 2003 Maxima [jontwin]
Feb 09, 2011 (12:37 pm)
I had the same problem with my 2003 maxima, but it was on the driver side, had it fix by the dealer 2 times, takes about 20 minutes to 30 minutes, they had to find the zero on the position of the window
#8982 of 8984 It just won't keep running
Jun 05, 2013 (3:45 am)
I just bought a 2000 Maxima. It starts and runs for about a minute, then dies. It will start right back up and die. It has a code for primary ignition but no miss when running. Any help will be appreciated.
#8984 of 8984 key fobs won't program ????
Nov 22, 2013 (8:34 am)
Key Fobs not working......
I locked car, put key in ignition 6 times until hazards flash, then turn key to ACC like instructed.
But when I press any key on either fob....hazards don't flash as they should when activating a FOB.
Is there maybe a fuse blown or a wireless receiver for the fobs has an issue ?
Any ideas ?