Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Volkswagen Passat Volkswagen Passat 2005 and earlier
8249 messages, Last post on Nov 11, 2009 at 6:16 AM
You are in the Volkswagen Passat Forum. Your Hosts are pat & karens
|
|
|---|---|
|
Replying to: altair4 (Jun 19, 2007 12:47 pm) Send to freespirit1  carspace.com.  Thanks again for your response. I will post again when i have some more news, good or bad. |
|
|
|
|
Hi! I am wondering if you like your 2002 Passat and if you have had any problems with it! Any information helps! Thanks |
|
|
At 80K it's time to replace the rear brake pads on my 03 Passat 1.8T (finally! - first time ever). At German Auto Parts.com, the price difference between OEM Jurids ($29) and various fancier options -Pagid ($38), Mintex ($37), etc - is small, so price isn't a factor. Is there any reason to get something other than OEMs? Mintex semi-metallics? Pagids? Etc.? Or just stick with OEMs? Thanks!
|
|
|
Replying to: brozhnik (Jun 27, 2007 5:16 pm) BTW, the Ate rotors I have rusted on the hat area. A bit unslightly. I think Ate has a new line of rotors out that are supposed to be coated/treated. Might be worth checking out. Word on the street is that Mintex isn't what they once were. I'd avoid them, just on the gossip factor.
|
|
|
Replying to: altair4 (Jun 27, 2007 7:03 pm) The rotors, btw, are fine at 80K - amazed the service guy. As for what I got, in the end I took it to a good independent mechanic, Whitedog Auto, and used the Jurids he had on hand. Charged me a total of $130 for parts and labor (compared to $219 asked by the dealer!) and did a great job. I don't think I could have done much better by buying online, right?
|
|
|
Replying to: brozhnik (Jul 01, 2007 7:49 pm) I think I spent about $85 in parts & supplies (brake cleaner and brake quiet) when I did a DIY on the rear brakes last time. I got the parts (PBR pads and Ate rotors) at getcoolparts.com - shipping is free over $50. I spent a couple of hours on the job - took my time because it was the first brake job I had done in twenty years and I just spent a while just looking at the design, layout, etc. I kinda like to admire the work of the engineers.
|
|
|
Replying to: L8_Apex (Oct 22, 2000 11:31 pm) |
|
|
Replying to: altair4 (Jul 02, 2007 3:20 am) I have a quick question on the rear brake project - I used to do all my own brake work but haven't worked on my '03 Passat which will need rear brakes soon. Are there any special tools required to retract the caliper or is that a pretty standrd process? Thanks for ant tips you may have -
|
|
|
Replying to: njpassat (Aug 07, 2007 10:34 am) I rented one from Autozone for free (you pay $35, but it's fully refunded upon return within 60 or 90 days).  I've read about others using a c clamp and needle nose pliers to do this, but this tool makes it ssssooooo easy, why go through the hassle? Advance Auto and I think even Pep Boys may do the same kind of tool rental. This was the first brake job I did in 20 years - it went very smoothly. Buy a small packet of brake grease at the counter of your favorite auto parts store. I'd also suggest coating the rear of the pads with brake quiet (I used the bottle, not the spray). If you google "Passat Information-base rear brakes" you might find some good instructions....
|
|
|
Replying to: altair4 (Aug 07, 2007 11:11 am) Thanks! Great information that should make the job alot easier - a good argument for the value of these forums Thanks again - |
|
You are here:
Forums
Sedans Volkswagen Passat Volkswagen Passat 2005 and earlier
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Volkswagen Passat
Browse by Board
Browse by Topic
Today's Chats
