Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Lexus ES Lexus ES 300/ES 330
5432 messages, Last post on Oct 09, 2009 at 8:50 AM
You are in the Lexus ES Forum. Your Hosts are pat & karens
|
Replying to: sean300 (Oct 12, 2007 10:18 pm)
|
|
|
Replying to: sean300 (Oct 12, 2007 10:18 pm) I changed the fluid. It is kind of a pain to refill. I used a 2 cycle oil syringe to refill the differential; squirting close to 2 quarts with a syringe was a pain. Just make sure you can open the fill hole (also a 10mm hex bolt) BEFORE you drain the fluid. The bolts were torqued on hard and I needed a breaker bar to open the fill hole bolt. The fill hole is on the back side of the differential. The Haynes manual has pictures which are quite good.
|
|
|
Replying to: lounger (Oct 17, 2007 7:24 am) |
|
|
Replying to: lounger (Oct 17, 2007 7:36 am)
|
|
|
Replying to: sean300 (Oct 17, 2007 8:38 pm)
|
|
|
Replying to: lounger (Oct 19, 2007 12:31 pm) |
|
|
|
I have a Lexus es300 and i was wondering if anybody can expalin what the problem might be. The VSC engine light and VSC off indicater lights are shown on the dash, and now the car wont go into four gear and the o/d wont engage. I
|
|
|
Replying to: pookie1090 (Dec 05, 2007 9:29 am) If so then VSC/Tc off is a normal default indication resulting form a CEL as is the lack of the system to use OD. Tighten the gas cap or fix the engine.... |
|
I recently replaced all four struts on my '98 es300. Bought kyb's off of ebay - got a really good deal. Last week (after having them installed by my mechanic) I was going over the Throgs Neck Bridge when all of the sudden the car began to shake violently. I was lucky to get the car back to my mechanic, told him what had happened and asked why my car was shaking like that. He took the struts apart and I was told that the replacement struts have slightly larger mounting holes for the bolts (to connect to control arm) than the original lexus struts that were replaced. He said that he put washers on to eliminate the play. Has anyone dealt with this issue? Is this a safe fix? I also had an alignment a few days before; my guys are trying to blame Mavis but I told them that an alignment has nothing to do with loose struts. I welcome any input/opinions or facts. Thanks.
|
|
|
Replying to: sean300 (Dec 05, 2007 4:27 pm) Still think that..?? Many mechanics (Firestone -- Goodyear) would take what you have just done as something of an insult and while maybe not directly sabotage the effort they might very well overlook some flaw in the parts you bring to them. Sound familiar..?
|
|
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2003 Lexus ES 300
2006 Lexus ES 330
Browse by Board
Browse by Topic
Today's Chats
