You have saved this page | See all saved pages
Mazda Millenia
4030 messages, Last post on Jan 06, 2013 at 10:24 PM
You are in the Mazda Millenia Forum.What is this discussion about? Mazda Millenia, Sedan
#4026 of 4030 2001 Mazda millenia chrome wheel corrosion by marsmazda
May 03, 2012 (12:22 pm)
I have a 2001 Millenia that has the 17" chrome wheels that were subject to the TSB issued by Mazda. I was not aware of the bulletin until recently when I began looking online for new wheels because the chrome was coming off of mine. I bought the car from a local Mazda dealer in 2004 and it was still under warranty at the time. But the dealer did not have the wheels replaced before they sold it to me. Now my vehicle is obviously out of warranty and the dealer is not willing to help me. I have also contacted Mazda as well and they said that they do not have to replace them either because the car is not under warranty anymore. From what I have read about these wheels this has been a widespread problem and I don't feel that I should have to pay for the manufacturers defect. Has anyone had any luck getting Mazda to fix this problem or have any suggestions?
#4027 of 4030 1995 Millenia great condition but bad engine by tryingit
Sep 03, 2012 (10:55 pm)
So our little creampuff has been sitting for about 5 years. Our daughter failed to pull over when an engine light came on, stalled a few miles later, we had it towed. Mazda dealer told us we needed a new engine, but I didn't get the impression, from their inability to answer questions, that they even looked at it. Now I'm wondering whether to repair this car (~50K mileage on the car) for a new driver of age, or sell the car as is. I hear this model with the S designation is rare. Otherwise the car is in great shape, looks new. Any suggestions on tradeoffs, what to do and cost?Thank you!
#4028 of 4030 Re: Need Advice on Mazda Engine Problem [herndons] by jlsman
Sep 19, 2012 (9:35 pm)
Replying to: herndons (May 29, 2001 6:55 am)
My 1997 Millenia with the 2.5 is leaking oil from the camshaft seal on the rear head, passenger side. It appears as if the seal itself is missing. I can see the oil coming out, and feel the cam turning with my finger. How hard is the seal to put in? What needs to be removed and replaced to accomplish installation of a new seal? Thanks!
#4029 of 4030 Re: my 1998 mazda millenia screw up [kmadan] by aloenurse
Oct 11, 2012 (11:30 am)
Replying to: kmadan (Mar 13, 2006 6:42 pm)
We had a problem with the engine light coming on and when checked it indicated that one thing needed replacement, then aftter a very short time, the check engine light came back on, and when we hooked it up to the computer, it indicated another thing needed to be replaced. Then, after a short time the check engine light came back on and this time the indication was to replace the part we had just replaced. We finally got the computer replaced (with a rebuilt computer) and that solved the problem. Hope you get a fix that doesn't cost you too much! Good luck!!
#4030 of 4030 next to impossible? by mike_jersey
Jan 06, 2013 (10:24 pm)
There's a guy who's going to replace the bad supercharger on the 2000yr 6cyl supercharged miller engine, but my brother and I cant seem to find replacement supercharger gasket kits anywhere. Someone mentioned around the garage that that's oem and more than likely only found through the dealership. NAPA, autozone etc. etc. all say they dont carry them. Anyone have any clue where we can find/order a whole new gasket/seal kit? Whats in there now is blown and leaking badly, and dont want to replace the supercharger just to piut the bad gaskets and seals back in. any leads or info would greatly be appreciated.To POST a message, please
Sign In.
Advertisement
Most Popular in Forums
Search Forums
Enter Keyword(s):
Learn More, Do More
Edmunds Community
Advertisement