Ask the Car People.SM


Mazda Millenia

4030 messages,  Last post on Jan 06, 2013 at 10:24 PM

You are in the Mazda Millenia Forum.

What is this discussion about? Mazda Millenia, Sedan




Messages Page 403 of 403

#4021 of 4030 Re: runs bad after hot starts [stoutblock] by bentman1

Oct 27, 2011 (5:15 pm)

Replying to: stoutblock (Oct 20, 2007 10:28 am)
I am having similar issues with my 2001 Milly S... did you ever find a definitive solution?
 
Thanks in advance for your help!!!
 
BENTMAN

#4022 of 4030 help by rwyla

Nov 29, 2011 (9:48 am)

I have a 99 milly S 2.3L supercharge with 123,000 miles went to work, lost all power and engine was very loud, I thought it was my muffler got it to autozone and these are the codes they gave me.
po105
po170
po173
po303
po400
 we changed the coil on cylinder 3 and replaced all 6 spark plugs, still no power and still have to loud noise, just ordered the front Y pipe with the flex joint, any ideas if this will solve this? I love my milly and would hate to part with it

#4023 of 4030 Re: help [rwyla] by bentman1

Nov 29, 2011 (7:58 pm)

Replying to: rwyla (Nov 29, 2011 9:48 am)
sounds different than my issue. I found more help at http://forums.mazdaworld.org ... good luck!!!
 
BENTMAN

#4024 of 4030 any ideas by rwyla

Dec 11, 2011 (9:27 am)

on my 99 milly s, with supercharger, and 123,000 miles we replaced the coil pack, all spark plugs, "Y" pipe with flex joint, and cataylic converter attached to rear exhaust manifold ( These were all new parts)....now she won't idle and constantly wants to stall...when I step on the gas, you have to get the RPM's up there for her to take off and still struggles up hills....did not have a chance to get to see if there are any more codes that popped up yet. any ideas. I would hate to lose my car. Thank you for any help

#4025 of 4030 Re: 2001 Mazda Millenia engine noise tapping [krumtx] by juliusjay

Apr 19, 2012 (6:51 am)

Replying to: krumtx (Aug 17, 2010 4:35 pm)
I have the same car, but the "ticking" sound like its coming from the passenger side of the engine, is that a bad tensioner?

#4026 of 4030 2001 Mazda millenia chrome wheel corrosion by marsmazda

May 03, 2012 (12:22 pm)

I have a 2001 Millenia that has the 17" chrome wheels that were subject to the TSB issued by Mazda. I was not aware of the bulletin until recently when I began looking online for new wheels because the chrome was coming off of mine. I bought the car from a local Mazda dealer in 2004 and it was still under warranty at the time. But the dealer did not have the wheels replaced before they sold it to me. Now my vehicle is obviously out of warranty and the dealer is not willing to help me. I have also contacted Mazda as well and they said that they do not have to replace them either because the car is not under warranty anymore. From what I have read about these wheels this has been a widespread problem and I don't feel that I should have to pay for the manufacturers defect. Has anyone had any luck getting Mazda to fix this problem or have any suggestions?

#4027 of 4030 1995 Millenia great condition but bad engine by tryingit

Sep 03, 2012 (10:55 pm)

So our little creampuff has been sitting for about 5 years. Our daughter failed to pull over when an engine light came on, stalled a few miles later, we had it towed. Mazda dealer told us we needed a new engine, but I didn't get the impression, from their inability to answer questions, that they even looked at it. Now I'm wondering whether to repair this car (~50K mileage on the car) for a new driver of age, or sell the car as is. I hear this model with the S designation is rare. Otherwise the car is in great shape, looks new. Any suggestions on tradeoffs, what to do and cost?
Thank you!

#4028 of 4030 Re: Need Advice on Mazda Engine Problem [herndons] by jlsman

Sep 19, 2012 (9:35 pm)

Replying to: herndons (May 29, 2001 6:55 am)
My 1997 Millenia with the 2.5 is leaking oil from the camshaft seal on the rear head, passenger side. It appears as if the seal itself is missing. I can see the oil coming out, and feel the cam turning with my finger. How hard is the seal to put in? What needs to be removed and replaced to accomplish installation of a new seal? Thanks!

#4029 of 4030 Re: my 1998 mazda millenia screw up [kmadan] by aloenurse

Oct 11, 2012 (11:30 am)

Replying to: kmadan (Mar 13, 2006 6:42 pm)
We had a problem with the engine light coming on and when checked it indicated that one thing needed replacement, then aftter a very short time, the check engine light came back on, and when we hooked it up to the computer, it indicated another thing needed to be replaced. Then, after a short time the check engine light came back on and this time the indication was to replace the part we had just replaced. We finally got the computer replaced (with a rebuilt computer) and that solved the problem.
Hope you get a fix that doesn't cost you too much! Good luck!!

#4030 of 4030 next to impossible? by mike_jersey

Jan 06, 2013 (10:24 pm)

There's a guy who's going to replace the bad supercharger on the 2000yr 6cyl supercharged miller engine, but my brother and I cant seem to find replacement supercharger gasket kits anywhere. Someone mentioned around the garage that that's oem and more than likely only found through the dealership. NAPA, autozone etc. etc. all say they dont carry them. Anyone have any clue where we can find/order a whole new gasket/seal kit? Whats in there now is blown and leaking badly, and dont want to replace the supercharger just to piut the bad gaskets and seals back in. any leads or info would greatly be appreciated.

Messages Page 403 of 403

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement