Sign In Join 



Mazda Millenia

3964 messages,  Last post on Nov 09, 2009 at 5:09 PM

You are in the Mazda Millenia Forum. Your Hosts are pat & karens

What is this discussion about? Mazda Millenia, Sedan





Messages Page 389 of 397
1
...
386
387
388
389
390
391
392
...
397
Prev
Next
Last
Go To Msg #
Search This Discussion

#3877 of 3964
Re: NEW-LOOKING AT AN 02S 84K, SUPER UNLEADED ONLY? [wynn1] by gregg_vw
Mar 03, 2008 (5:35 am)
Reply

Replying to: wynn1 (Mar 03, 2008 12:45 am)

Do NOT use regular unleaded in the supercharged Miller cycle engine. It is OK to do in the 2.5 liter, though I don't understand why people do. The few cents more that premium costs has become a smaller percentage of overall fuel cost as the price per gallon has risen. You could mix mid-grade and premium to shoot for a 91 octane mix I suppose.
 
If premium is recommended, then using it will gain you more power and better mileage. However, with the S, the knock sensor cannot always react quickly enough to compensate when the supercharger spools up.
 
Make sure the expensive 60K service was done (timing belt, plugs, etc.). Use premium and enjoy the car.
#3878 of 3964
Re: Check engine/TCS OFF lights are ON!! HELP NEEDED!! [maltb] by lbrighton
Mar 05, 2008 (1:01 pm)
Reply

Replying to: maltb (Mar 01, 2007 1:30 pm)

I have been experiencing a similar prob for some time . I am pretty happy with my 2002 millenia except one situation, every so often prob at least once a day now the the transmission jerks the car forward a bit ( and hold light blinks-even though I have not engaged it) I had the transmission replaced about 2 years ago and the engine light has come on and off since I picked up the car brand new from the dealer. Even when I brought the car in for routine maintenance they never found anything wrong with it until I bought it after the 3 yr lease was up, then I needed a new trannie. SO since the dealer quote me a price of 6K I took myself to a local AAMCO dealer and had one installed for 3k, unfortunately I still have a prob, can I solve this by somehow having that hold button feature disabled?
thanks!
#3879 of 3964
Thermostat Frozen on 90 in my 99 Millenia by tex1084
Apr 02, 2008 (7:20 pm)
Reply
Though I consider myself to be fairly savvy under the hood and in normal maintenance with my car, this one's over my head. What could be the source of my problem when my air conditioning unit thermostat (if that's even its technical name) is stuck on 90. Even when I turn it off, it's blowing warm air up my thighs.
 
A broken fuse? A broken thermostat? The protocol for replacing a broken "thermostat" (a part only $18) seems to be a hell of an effort. I'm hoping I read the wrong information.
 
Could anyone send me in the right direction?--hopefully not to a dealer.
 
Thanks a bunch.
#3880 of 3964
Weekly chats by pf_flyer HOST
Apr 08, 2008 (8:32 am)
Reply
Hope you can come out tonight to meet and greet some of your fellow CarSpace members!
 
The Mazda Club Chat is on tonight. The chat room opens at 8:45PM ET Hope to see YOU there! Check out the schedule
#3881 of 3964
Re: Check engine/TCS OFF lights are ON!! HELP NEEDED!! [lbrighton] by cindy79
Apr 10, 2008 (8:28 am)
Reply

Replying to: lbrighton (Mar 05, 2008 1:01 pm)

I have a 2000 Millenia S Millenium Edition , the check engine light has been on since I have purchased the vehicle, also for the last few months the TCS and TCS Off light have started to come on and stay on for periods of time which causes the car to jerk, I was told my O2 sensor needs to be replaced, you may want to have your sensors checked , They can cause the car not to perform correctley even as far as the transmission performance. This can be exspensive
#3882 of 3964
POS CAR by cindy79
Apr 10, 2008 (8:49 am)
Reply
I HAVE A 200 MAZDA MILLENIA S THAT I FINANCED FOR $9,000 THE BODY LOOKS GREAT BUT I AM HAVING PROBLEM AFTER PROBLEM , THE AUTOMATIC STEERING WHEEL WORKS WHEN IT WANTS TO , THE CHECK ENGINE LIGHT STAYS ON, THE SENSORS HAVE TO BE REPLACED O2 AN MAP SENSOR, THE TCS LIGHT AND TCS OFF LIGHT COME ON AT THE SAME TIME WHICH CAUSES THE CAR TO JERK , I PURCHASED THE CAR 08/07 IT IS EXPENSIVE TO REPAIR I AM CONSIDERING TRADING IT IN , I HAVE READ SEVERAL FORUMS ON MILLENIAS AND THESE SEEM TO BE COMMON ISSUES , THE CAR IS GOOD FOR THE LOOKS WHICH IS WHAT CAUGHT MY ATTENTION BUT THAT IS ABOUT ALL.
#3883 of 3964
Re: POS CAR [cindy79] by gregg_vw
Apr 10, 2008 (12:06 pm)
Reply

Replying to: cindy79 (Apr 10, 2008 8:49 am)

They are very good cars and often can go well past 120,000 miles trouble-free. They need to be serviced properly, especially the S model. The S model must have premium fuel. The 60,000 mile service is important. For all the people on forums who complain, there are many more happy owners, some of whom still look for low mileage examples when it is time to trade. I owned two of them and had no regrets. However, technology has moved on and they are hardly state of the art anymore.
 
Someone got a real deal on purchasing my second one from the dealer. It needed O2 sensors and all 60K work. Millenium Edition that sold with 59,000 miles for less than $7,000 (I believe the asking price was like 10K). The dealer did all the service, and the purchaser got a vehicle that was like new.
 
You likely paid more for the car than you needed to (KBB and even Edmunds list inflated values for these cars, compared for what they are really selling for). You may have been happier with the non-S model, which is just as pretty. I recommend a person buy one either from a Mazda dealer (they will have done the required service), or from someone who has all the service records. O2 sensors will be pricey from a dealer. Shop around for parts.
 
Tuition in the school of life stuff: it is easy enough to turn off the check engine light without fixing the underlying problem. Running a computer check through Autozone for example might give you a better idea of whether there are any error codes stored on a car you are considering. As for price, a good check is to see what similar models have sold for on eBay.
 
You need to evaluate repair costs and overall condition. It may be cheaper for you to bring the car up to optimum condition, or it may be cheaper to dump it now. All depends. Has it had the 60,000 tuneup and timing belt change? Is it using any fluids? Any leaks at all? The steering wheel doesn't matter that much...it's mostly for show. Set it where you want it, and then turn the auto feature off most of the time. Less stress on the steering column motor, and the feature will last longer.
#3884 of 3964
95 Mill S dash light out by oastler
Apr 10, 2008 (1:38 pm)
Reply
My LED-type light is out that displays on the dash the time, thermostat and
AC settings. I checked the fuse and its okay. Any ideas on how to fix it myself
or is a shop going to have to do it?
 
Thanks,
Tom
#3885 of 3964
Re: POS CAR [gregg_vw] by cindy79
Apr 16, 2008 (3:58 am)
Reply

Replying to: gregg_vw (Apr 10, 2008 12:06 pm)

Im not sure if it has had the 60K services when I purchased the car it had 88K, The dealer is paying for th sensor repairs. However one place meineke to be exact told me I need manifolds, and a converter if they a diffrent, the dealers repairman said that I needed all 4 o2 sensors and new axles which I was told by both he said my manifolds were fine, I guesiing the tcs off light has to do with the faulty o2 sensors.
#3886 of 3964
2000 Millenia Check engine Light/P0105 error code by taxijack
Apr 25, 2008 (2:26 am)
Reply
I have a 2000 Mazda Millenia and love it. I have read the site looking for a fix to my problem but haven't seen alot on my error codes. The darn check engine light is on and has been on for about 6 months now. The car has been running fine until late last week. I took the Mazda into the shop because now it is running ruff when I stop at a light. I do here a vacum leak at top of engine now.While at the shop they read the codes P0105 MAP/BORO Circuit Malfunction and also P0300 Multi Cyl Malfunction/misfire Detected. Not sure what I need to do to get this fixed. say that because I am with the Military overseas adn there is no Mazda dealers over here. What parts would I need to order to get someone to fix it. Would a MAP/Boro sensor fix the one problem.
 
Also another question about Check Engine Light. How do I get rid of that. Would the replacement of the 4 sensor help. I read alot on site were some people have replaced one or two sensor to fix. With me being oversea I tought maybe replace all four at same time since I don't have a dealer to go to. Any ideas

Messages Page 389 of 397
1
...
386
387
388
389
390
391
392
...
397
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement