Last post on Jan 06, 2013 at 9:24 PM
You are in the Mazda Millenia
What is this discussion about?
Mazda Millenia, Sedan
#3488 of 4030 Re: 1999 millenia [mmerchant]
Sep 19, 2005 (12:10 pm)
I refer to my earlier posting about the clicking/tapping noise from the front left suspension on warm days at slow speeds on all road types.
The problem has been resolved finally upon the replacement of the middle control arm link. Earlier the lower and upper control arms, the tie rod end and the steering rack were replaced all under warranty.
The part was replaced under warranty under the Mazda added protection plan.
#3489 of 4030 Re: MM'97 [vickat]
Sep 22, 2005 (3:09 pm)
Hi,PCFIG here,also have posted about the '99 MMS I bought 3wks. ago.Of course after purchase malfunction indicator light is on.Thought it was related to fuse,that was only re-setting computer each time I pulled it.Just got car back from tech check of codes.....the Bank 1 and Bank 2(??) catalytic converter efficiency codes indicate trouble in this area.Took it too an honest tech I know,he thinks it is related to supercharger,but not sure,suggest taking it to dealer for further testing.Currently waiting for reply from dealer i bought from "as is" hoping they will fix this issue.Though bought "as is",think their is a buyer protection law of 30 days....this could get nasty.I'll let you know what happens.Let me know if you solve your "malfunction light" issue.Peace,out....
#3490 of 4030 Check Engine Light
Sep 24, 2005 (3:43 pm)
the CEL went on last week on my 99 Millenia S. Shop did a diagnostic and replaced the EGR valve ; total cost about $500. (the part is expensive!) Car was fine for 2 days but yesterday the CEL went on again. Back to shop on Monday. Any advice?
#3491 of 4030 Re: Check Engine Light [logtrail]
Sep 25, 2005 (5:29 am)
You might want to also ask in our "Check Engine" light discussion - let us know what happens.
#3492 of 4030 Re: CD Problem [misty8]
Sep 27, 2005 (8:35 am)
Hi, I am new to this and have searched for an answer to this post, but I have been unable to find one. Does anyone know if their is a easy or reasonable fix for this problem? I actually just bought my Mazda, love it, but would love it even more if I can get the CD to work.
Sep 27, 2005 (6:52 pm)
I have a '97 Millenia with Miller engine. I have solid P0105 error code that I need to repair so I can renew registration. I'm hoping it's simply a loose connection or some other simple problem. Can anyone tell me where the Manifold Absolute Pressure Sensor, which I believe is sometimes called the boost sensor is located on this engine? Oh, by the way, the car runs great otherwise.
#3494 of 4030 Check engine light on and TCS off
Oct 02, 2005 (4:37 pm)
I bought 98 Mazda millenia S 6 months before. I am getting checking engine light on and TCS off message. On the highway, all of a sudden car is having jerk and speed goes down. I would appreciate, if you can give me suggestions to rectify this.
#3495 of 4030 Millenia reliability
Oct 06, 2005 (10:58 am)
I am thinking of buying a 1995 Mazda Millenia (engine made in Japan btw). It has all the features and drives like a dream even after its 134K miles. But, I am not too sure about how long MMs last. Can I expect it to last me 2-3 years with proper maintenance or is it past its expected life.
#3496 of 4030 Re: '99 Millenia,engine light on [pcfig]
Oct 07, 2005 (4:43 am)
I hate electrical issues myself. I had the CEL (Check Eng. Light) come on my 99 MM 59k and went to the local auto place and bought an OBD II Reader for about $150. (I did this because the dealer said he would run a test on it for $85 - No Thanks) This little gem I bought told me that the problem was code P0431 -Warm Up Catalyst Efficiency Below Threshold (Bank 2). Basically this means that the catalytic converter is malfunctioning. But its not a huge problem. I used the OBD Reader I bought to turn off the CEL. Its just an idea. May not be your solution but at least if you ran the OBD you could get a clear idea of what is going on in there. Some Auto parts stores will run it for free if you dont want to purchase one.... However, the dealer charges $85 per scan - thus if you use it twice it pays its rent. Hope that helps a little.
#3497 of 4030 Re: MAP Sensor [albanymike]
Oct 07, 2005 (4:57 am)
If you just want the 97 to pass inspection you may be able to get a local auto body shop to run a scan and turn the light off. In my state they automatically fail your vehicle if any of the yikes light are on. Some folks just try and get the light turned off so they can run it through inspection. Not sure if its a great idea in the long run.. but just a suggestion.