Sign In Join 



Dodge/Plymouth Neon

1758 messages,  Last post on Sep 22, 2009 at 9:56 PM

You are in the Dodge/Plymouth Neon Forum. Your Hosts are pat & karens

What is this discussion about? Dodge Neon, Plymouth Neon, Sedan


Messages Page 84 of 177
1
...
81
82
83
84
85
86
87
...
177
Prev
Next
Last
Go To Msg #
Search This Discussion

#822 of 1758
71Charger, Buoyant by zapatista2000
Sep 19, 2001 (9:40 am)
Reply
71Charger-
I live and work on the Hill. I'm willing to take it anywhere that I can get back home on the Metro while they work on it. The code it's giving me is a 32--EGR System Failure. Some folks on the neons.org board have had the same problem and it seems to be a minor issue that sometimes just goes away (a la Buoyant's approach to auto mechanics) and other times is remedied for a maximum of $200 for a new sensor and labor, or something like that. Some even have decided to block off the EGR system entirely. If you have any suggestions of Metro-accessible shops that are trustworthy, I'd greatly appreciate it.
 
Buoyant--Sounds like you and I live by the fate meted out to us by Murphy's law. I blame my Irish grandmother.
#823 of 1758
Irish grandmothers and faulty Neons by buoyant
Sep 19, 2001 (6:57 pm)
Reply
I'd blame mine too, but since she's no longer with us I'll just blame it on the German one. Damn Germans.
 
Out of curiousity, is the light coming on red or amber in color? Amber warning lights can usually be ignored (particularly if they come on intermittently) whereas the red ones signal impending doom.
 
Personally, I would ignore any orange light signaling a malfunction in the emissions system.
 
But if the light REALLY bothers you, invest $3 in an allen wrench, pop off the gauge cover and pull the thing out completely. This way you'll have that fresh finished look (no tape) and then you can take the $197 you saved and blow it on a new 20" Color TV, 120 Steak Chalupas or perhaps a ceramic kitty-cat if you're into that kind of thing.
#824 of 1758
Reed Brothers Dodge comes to mind by 71charger
Sep 19, 2001 (7:26 pm)
Reply
Reed Brothers Dodge on the pike in Rockville, MD has always treated me well (except their body shop manager, but that's not where your problem is). It's a dealer and you'll pay premium prices but they are literally right next to the Shady Grove station on the Red Line. Carmax is right across the the Metro driveway from them. It's as far out as you can get on the Metro but I've never known them to do unnecessary work. I'll ask around at work when I can. These are pretty hectic days and I've been open-endedly (is that a word?) transferred to second shift. I'll see if I can get any other recommendations for you.
#825 of 1758
Reed Brothers by snowman
Sep 19, 2001 (7:51 pm)
Reply
Indeed We have very good experience with them. Their mechanics are very good.
#826 of 1758
197 Bottles of Beer by zapatista2000
Sep 20, 2001 (7:23 am)
Reply
I could blow it in a big way at dollar Bud night at any number of establishments around my office. That reminds me of a funny story about my boss, but back to the car...
 
Thanks for the Reed Brothers advice. It's an amber light that comes and goes and I might give it a few more days to see if it goes away again. If not, I think I'll take it up to Rockville and maybe play some pinball at Jillian's at White Flint on the way back (why is it that there are no dart boards or pinball machines in this entire city? The things I miss about Minnesota......)
Thanks again for the help.
 
Open-endedly sounds like a discription of our newest made-for-TV war, "Operation Infinite Justice."
#827 of 1758
Check your grounds and wiring connectors by 71charger
Sep 20, 2001 (7:30 pm)
Reply
Before you spend any money on fixing an amber light it might be an intermittent problem in a wiring connection. At least eyeball your ground connections and make sure they look good. Pull apart and reconnect as many connectors as you can. There may be a small bit of corrosion in there somewhere. As the temperature of the wires rise so does the resistance. At a certain temp point you may be getting to where there is insufficient current flow through a connector giving a false fault reading. Saved me some money doing this when the temp gauge suddenly started going nuts in my Lancer.
#828 of 1758
great idea by zapatista2000
Sep 21, 2001 (6:26 am)
Reply
You know, after going away, the light has come on again twice during pretty long trips, so maybe that's it. I hate to say it, but I have no idea where my ground connections are, where to look for them or what they look like. Is there a resource online--maybe a pictoral tutorial somewhere?
#829 of 1758
Just look for the black wires by 71charger
Sep 21, 2001 (6:38 pm)
Reply
Look for where black wires are connected to the sheetmetal with, appropriately enough, sheetmetal screws. Usually on the back side of the radiator support, inner fenders, firewall and such. See if any look corroded. Or just take all you can find apart, scrape any crud (hate to load you down with this technical jargon) off the eyelets and where they attach and screw it back together. There are probably small ground straps on your motor mounts to maintain electrical continuity from the engine to the rest of the car as the engine is suspended in rubber bushings. These grounds are usually bare braided steel with a clip on each end that is just pushed on. Give those (if you can find them) a wiggle so the steel can bite through any surface rust. As for the rest, as I said, just pull connectors apart and put them back together. Just make sure you check for any tabs that have to be pushed in/pulled out to release them before you just yank on them. Broken wiring connectors are a major pain. You probably don't want to disconnect the grounds from the battery as that will kill your clock and radio presets.
#830 of 1758
Got It by zapatista2000
Sep 24, 2001 (1:11 pm)
Reply
Thanks for the detailed how-to. I'll give it a shot when it stops raining and report back.
#831 of 1758
My 2001 Neon ES by silverneon
Sep 26, 2001 (9:19 pm)
Reply
Since this is my first post, I'll just stick to what I know. As the title shows, I own a 2001 Neon ES. 5 speed, of course. Doubt i could have made it with a 3-speed auto. Just over 8000 miles since I bought it on May 23.
Anyway, Three problems I've had....One of which I've solved myself. 1. Bolt-on wheel covers make an annoying clicking/rubbing noise when the car is in motion. I believe the wheel covers rub against the wheel itself or the tire. Tightening didn't help in my situation. I solved this with a set of $40 wheel covers from Wal-Mart. Yes, Wal-Mart.... 2. Either the clutch slips or the engine hesitates every now and then. I was very suprised when my dealer couldn't duplicate the problem. I'm suprised they're able to muddle their way through oil changes. I've more or less decided to live with the problem until it does it frequently enough for me to demonstrate it to them myself. I know that if I tried it now, The car would refuse to play along. They seem to be tempermental like that. 3. It seems to like to attempt to stall or, on two occasions, to actually stall. The conditions were different in every instance of the problem. I tried a procedure from neon.org to use the on-board diagnostics to get stored computer error codes, but none had been stored. Interesting.
After my previous 3 vehicles, I realize that all vehicles are going to have problems. I'm not one of those who whould sit here and refuse to buy another DC vehicle for the rest of my life for two reasons. The first being it's damned foolish to say, and second of all, I've "lurked" around this board for some time, and I've seen what is said about those who act so foolishly. I look forward to seeing if any of you have had, or have heard about, either of the last two problems. I've checked all recalls and TSB's, and I don't believe there are any concerning these problems. There are, however some things on the NHTSA site posted by owners about the stalling and, in part, the hesitation, clutch.
 
Sorry for the lengthy post. I didn't realize that I'm probably in the contention for a record.

Messages Page 84 of 177
1
...
81
82
83
84
85
86
87
...
177
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement